| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20150515230951.708699553@linuxfoundation.org>
Date: Fri, 15 May 2015 16:10:36 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Lv Zheng <lv.zheng@...el.com>,
Bob Moore <robert.moore@...el.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Dirk Behme <dirk.behme@...il.com>,
"George G. Davis" <george_davis@...tor.com>
Subject: [PATCH 3.14 34/51] ACPICA: Utilities: Cleanup to convert physical address printing formats.
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lv Zheng <lv.zheng@...el.com>
commit cc2080b0e5a7c6c33ef5e9ffccbc2b8f6f861393 upstream.
ACPICA commit 7f06739db43a85083a70371c14141008f20b2198
For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.
This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.
Link: https://github.com/acpica/acpica/commit/7f06739d
Signed-off-by: Lv Zheng <lv.zheng@...el.com>
Signed-off-by: Bob Moore <robert.moore@...el.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Signed-off-by: Dirk Behme <dirk.behme@...il.com>
[gdavis: Apply changes to drivers/acpi/acpica/{tbutils,tbxfload}.c]
Signed-off-by: George G. Davis <george_davis@...tor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/acpi/acpica/exfldio.c | 10 ++++------
drivers/acpi/acpica/hwvalid.c | 16 ++++++++--------
drivers/acpi/acpica/nsdump.c | 7 +++----
drivers/acpi/acpica/tbutils.c | 4 ++--
drivers/acpi/acpica/tbxfload.c | 7 +++----
drivers/acpi/acpica/utaddress.c | 34 +++++++++++++++-------------------
6 files changed, 35 insertions(+), 43 deletions(-)
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -263,17 +263,15 @@ acpi_ex_access_region(union acpi_operand
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_BFIELD,
- " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %p\n",
+ " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %8.8X%8.8X\n",
acpi_ut_get_region_name(rgn_desc->region.
space_id),
rgn_desc->region.space_id,
obj_desc->common_field.access_byte_width,
obj_desc->common_field.base_byte_offset,
- field_datum_byte_offset, ACPI_CAST_PTR(void,
- (rgn_desc->
- region.
- address +
- region_offset))));
+ field_datum_byte_offset,
+ ACPI_FORMAT_UINT64(rgn_desc->region.address +
+ region_offset)));
/* Invoke the appropriate address_space/op_region handler */
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -142,17 +142,17 @@ acpi_hw_validate_io_request(acpi_io_addr
byte_width = ACPI_DIV_8(bit_width);
last_address = address + byte_width - 1;
- ACPI_DEBUG_PRINT((ACPI_DB_IO, "Address %p LastAddress %p Length %X",
- ACPI_CAST_PTR(void, address), ACPI_CAST_PTR(void,
- last_address),
- byte_width));
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X",
+ ACPI_FORMAT_UINT64(address),
+ ACPI_FORMAT_UINT64(last_address), byte_width));
/* Maximum 16-bit address in I/O space */
if (last_address > ACPI_UINT16_MAX) {
ACPI_ERROR((AE_INFO,
- "Illegal I/O port address/length above 64K: %p/0x%X",
- ACPI_CAST_PTR(void, address), byte_width));
+ "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X",
+ ACPI_FORMAT_UINT64(address), byte_width));
return_ACPI_STATUS(AE_LIMIT);
}
@@ -181,8 +181,8 @@ acpi_hw_validate_io_request(acpi_io_addr
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
- ACPI_CAST_PTR(void, address),
+ "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)",
+ ACPI_FORMAT_UINT64(address),
byte_width, port_info->name,
port_info->start,
port_info->end));
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -271,12 +271,11 @@ acpi_ns_dump_one_object(acpi_handle obj_
switch (type) {
case ACPI_TYPE_PROCESSOR:
- acpi_os_printf("ID %02X Len %02X Addr %p\n",
+ acpi_os_printf("ID %02X Len %02X Addr %8.8X%8.8X\n",
obj_desc->processor.proc_id,
obj_desc->processor.length,
- ACPI_CAST_PTR(void,
- obj_desc->processor.
- address));
+ ACPI_FORMAT_UINT64(obj_desc->processor.
+ address));
break;
case ACPI_TYPE_DEVICE:
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -227,8 +227,8 @@ acpi_tb_install_table(acpi_physical_addr
table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
if (!table) {
ACPI_ERROR((AE_INFO,
- "Could not map memory for table [%s] at %p",
- signature, ACPI_CAST_PTR(void, address)));
+ "Could not map memory for table [%s] at %8.8X%8.8X",
+ signature, ACPI_FORMAT_UINT64(address)));
return;
}
--- a/drivers/acpi/acpica/tbxfload.c
+++ b/drivers/acpi/acpica/tbxfload.c
@@ -184,11 +184,10 @@ static acpi_status acpi_tb_load_namespac
* be useful for debugging ACPI problems on some machines.
*/
if (acpi_gbl_disable_ssdt_table_load) {
- ACPI_INFO((AE_INFO, "Ignoring %4.4s at %p",
+ ACPI_INFO((AE_INFO, "Ignoring %4.4s at %8.8X%8.8X",
acpi_gbl_root_table_list.tables[i].signature.
- ascii, ACPI_CAST_PTR(void,
- acpi_gbl_root_table_list.
- tables[i].address)));
+ ascii, ACPI_FORMAT_UINT64(acpi_gbl_root_table_list.
+ tables[i].address)));
continue;
}
--- a/drivers/acpi/acpica/utaddress.c
+++ b/drivers/acpi/acpica/utaddress.c
@@ -107,10 +107,10 @@ acpi_ut_add_address_range(acpi_adr_space
acpi_gbl_address_range_list[space_id] = range_info;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "\nAdded [%4.4s] address range: 0x%p-0x%p\n",
+ "\nAdded [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n",
acpi_ut_get_node_name(range_info->region_node),
- ACPI_CAST_PTR(void, address),
- ACPI_CAST_PTR(void, range_info->end_address)));
+ ACPI_FORMAT_UINT64(address),
+ ACPI_FORMAT_UINT64(range_info->end_address)));
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(AE_OK);
@@ -160,15 +160,13 @@ acpi_ut_remove_address_range(acpi_adr_sp
}
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "\nRemoved [%4.4s] address range: 0x%p-0x%p\n",
+ "\nRemoved [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n",
acpi_ut_get_node_name(range_info->
region_node),
- ACPI_CAST_PTR(void,
- range_info->
- start_address),
- ACPI_CAST_PTR(void,
- range_info->
- end_address)));
+ ACPI_FORMAT_UINT64(range_info->
+ start_address),
+ ACPI_FORMAT_UINT64(range_info->
+ end_address)));
ACPI_FREE(range_info);
return_VOID;
@@ -245,16 +243,14 @@ acpi_ut_check_address_range(acpi_adr_spa
region_node);
ACPI_WARNING((AE_INFO,
- "%s range 0x%p-0x%p conflicts with OpRegion 0x%p-0x%p (%s)",
+ "%s range 0x%8.8X%8.8X-0x%8.8X%8.8X conflicts with OpRegion 0x%8.8X%8.8X-0x%8.8X%8.8X (%s)",
acpi_ut_get_region_name(space_id),
- ACPI_CAST_PTR(void, address),
- ACPI_CAST_PTR(void, end_address),
- ACPI_CAST_PTR(void,
- range_info->
- start_address),
- ACPI_CAST_PTR(void,
- range_info->
- end_address),
+ ACPI_FORMAT_UINT64(address),
+ ACPI_FORMAT_UINT64(end_address),
+ ACPI_FORMAT_UINT64(range_info->
+ start_address),
+ ACPI_FORMAT_UINT64(range_info->
+ end_address),
pathname));
ACPI_FREE(pathname);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists