lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 16 May 2015 09:37:33 +0200
From:	Jiri Slaby <jslaby@...e.cz>
To:	stable@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org,
	Ludovic Desroches <ludovic.desroches@...el.com>,
	Jiri Slaby <jslaby@...e.cz>
Subject: [PATCH 3.12 093/142] tty/serial: at91: maxburst was missing for dma transfers

From: Ludovic Desroches <ludovic.desroches@...el.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit a8d4e01637902311c5643b69a5c80e2805f04054 upstream.

Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.

Signed-off-by: Ludovic Desroches <ludovic.desroches@...el.com>
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
---
 drivers/tty/serial/atmel_serial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index ebdc00f184a1..ab2e22bf54fd 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -756,6 +756,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 	config.direction = DMA_MEM_TO_DEV;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 	config.dst_addr = port->mapbase + ATMEL_US_THR;
+	config.dst_maxburst = 1;
 
 	ret = dmaengine_device_control(atmel_port->chan_tx,
 					DMA_SLAVE_CONFIG,
@@ -920,6 +921,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	config.direction = DMA_DEV_TO_MEM;
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 	config.src_addr = port->mapbase + ATMEL_US_RHR;
+	config.src_maxburst = 1;
 
 	ret = dmaengine_device_control(atmel_port->chan_rx,
 					DMA_SLAVE_CONFIG,
-- 
2.3.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists