linux-kernel - RE: [PATCH V2 3/4] watchdog: da9062: DA9062 watchdog driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6ED8E3B22081A4459DAC7699F3695FB7014B22B8FE@SW-EX-MBX02.diasemi.com>
Date:	Mon, 18 May 2015 16:03:06 +0000
From:	"Opensource [Steve Twiss]" <stwiss.opensource@...semi.com>
To:	Guenter Roeck <linux@...ck-us.net>,
	"Opensource [Steve Twiss]" <stwiss.opensource@...semi.com>
CC:	LINUXKERNEL <linux-kernel@...r.kernel.org>,
	LINUXWATCHDOG <linux-watchdog@...r.kernel.org>,
	Wim Van Sebroeck <wim@...ana.be>,
	Alessandro Zummo <a.zummo@...ertech.it>,
	DEVICETREE <devicetree@...r.kernel.org>,
	David Dajun Chen <david.chen@...semi.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	LINUXINPUT <linux-input@...r.kernel.org>,
	Lee Jones <lee.jones@...aro.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	"Mark Rutland" <mark.rutland@....com>,
	Pawel Moll <pawel.moll@....com>,
	RTCLINUX <rtc-linux@...glegroups.com>,
	Rob Herring <robh+dt@...nel.org>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Support Opensource <Support.Opensource@...semi.com>
Subject: RE: [PATCH V2 3/4] watchdog: da9062: DA9062 watchdog driver


On 18 May 2015 16:28 Guenter Roeck wrote:

> On Mon, May 18, 2015 at 02:15:01PM +0000, Opensource [Steve Twiss]
> wrote:
> > On 15 May 2015 21:20 Guenter Roeck,
> >
> > > > > > +
> > > > > > +/* E_WDG_WARN interrupt handler */
> > > > > > +static irqreturn_t da9062_wdt_wdg_warn_irq_handler(int irq, void*data)
> > > > > > +{
> > > > > > +	struct da9062_watchdog *wdt = data;
> > > > > > +
> > > > > > +	dev_notice(wdt->hw->dev, "Watchdog timeout warning trigger.\n");
> > > > > > +	return IRQ_HANDLED;
> > > > > > +}
> > > > > > +
> > > >
> > > > On 15 May 2015 13:58 Guenter Roeck wrote:
> > > >
> > > >  [...]
> > > >
> > > > > >>> +
> > > > > >>> +	irq = platform_get_irq_byname(pdev, "WDG_WARN");
> > > > > >>> +	if (irq < 0) {
> > > > > >>> +		dev_err(wdt->hw->dev, "Failed to get IRQ.\n");
> > > > > >>> +		ret = irq;
> 
> Hi Steve,

Hi Guenter,

> Since the interrupt is optional, the driver should also not fail to load
> if no interrupt is assigned to it in the first place.

Yeah. I've been thinking about it and I agree now. I'll erase the handler. 

> On a separate note, there was a comment stating that the da9062 watchdog
> is identical to the da9063 watchdog. If so, why can't you just use the da9063
> watchdog driver ?

Well, the short answer to this is, it's not the same. I was just in the process of
replying to that other thread. The OnKey and RTC are functionally similar, so I
am going to look at integrating the two drivers in some future patch sets, but
the watchdog is definitely not based upon DA9063.

I did mention this in a previous thread: 
https://lkml.org/lkml/2015/5/6/505

Regards,
Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/