| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <555B3E3A.8000605@denx.de>
Date: Tue, 19 May 2015 15:44:26 +0200
From: Heiko Schocher <hs@...x.de>
To: Philipp Zabel <p.zabel@...gutronix.de>
CC: Shawn Guo <shawnguo@...nel.org>, linux-kernel@...r.kernel.org,
Shawn Guo <shawn.guo@...aro.org>,
Sascha Hauer <kernel@...gutronix.de>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v2] arm, imx6, dts: add DT for aristainetos2 board
Hello Philipp,
Am 19.05.2015 10:48, schrieb Philipp Zabel:
> Hi Heiko, Shawn,
>
> Am Dienstag, den 19.05.2015, 09:09 +0200 schrieb Heiko Schocher:
> [...]
>>> What is this? I failed to find it in Documentation/devicetree/bindings/
>>
>> Ah, this is not documentated, see commit:
>>
>> commit 628f435be4359e6ae8ecfdda9b492053be76a057
>> Author: Philipp Zabel <p.zabel@...gutronix.de>
>> Date: Tue Feb 25 11:55:04 2014 +0100
>>
>> imx-drm: parallel-display: Add drm_panel support
>>
>> added Philipp to cc ...
>
> This was meant to be a temporary solution to connect a drm_panel to the
> parallel-display when the of-graph bindings were not yet available.
> I'd very much prefer to switch to the common of-graph bindings similarly
> to the LDB driver instead. Could you check if this would work for you:
Yes, your patch works for me (with appropriate changes in the dts file)
You can add my
Tested-by: Heiko Schocher <hs@...x.de>
for this patch, thanks!
@Shawn: How do I proceed now with my patch for the aristainetos2 board
support? Should I base my v3 of the aristainetos2 on this patch,
or should I wait with this change, until the patch from Philipp
is accepted and post a follow up?
bye,
Heiko
>
> -----8<-----
> From: Philipp Zabel <p.zabel@...gutronix.de>
> Subject: [PATCH] drm/imx: parallel-display: fix drm_panel support
>
> The parallel-display driver used an undocumented, non-standard property
> "fsl,panel" to optionally associate with a drm_panel device. This patch
> fixes the driver to use the OF graph bindings, just as the LDB driver:
>
> parallel-display {
> compatible = "fsl,imx-parallel-display";
> ...
>
> port@1 {
> reg = <1>;
>
> parallel_out: endpoint {
> remote_endpoint = <&panel_in>;
> };
> };
> };
>
> panel {
> ...
>
> port {
> panel_in: endpoint {
> remote-endpoint = <¶llel_out>;
> };
> };
> };
>
> Signed-off-by: Philipp Zabel <p.zabel@...gutronix.de>
> ---
> .../devicetree/bindings/drm/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++--
> drivers/gpu/drm/imx/parallel-display.c | 21 ++++++++++++-----
> 2 files changed, 39 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
> index e75f0e5..971c3ee 100644
> --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
> +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
> @@ -65,8 +65,10 @@ Optional properties:
> - edid: verbatim EDID data block describing attached display.
> - ddc: phandle describing the i2c bus handling the display data
> channel
> -- port: A port node with endpoint definitions as defined in
> +- port@[0-1]: Port nodes with endpoint definitions as defined in
> Documentation/devicetree/bindings/media/video-interfaces.txt.
> + Port 0 is the input port connected to the IPU display interface,
> + port 1 is the output port connected to a panel.
>
> example:
>
> @@ -75,9 +77,29 @@ display@di0 {
> edid = [edid-data];
> interface-pix-fmt = "rgb24";
>
> - port {
> + port@0 {
> + reg = <0>;
> +
> display_in: endpoint {
> remote-endpoint = <&ipu_di0_disp0>;
> };
> };
> +
> + port@1 {
> + reg = <1>;
> +
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> +};
> +
> +panel {
> + ...
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> };
> diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
> index 74a9ce4..b4deb9c 100644
> --- a/drivers/gpu/drm/imx/parallel-display.c
> +++ b/drivers/gpu/drm/imx/parallel-display.c
> @@ -21,6 +21,7 @@
> #include <drm/drm_panel.h>
> #include <linux/videodev2.h>
> #include <video/of_display_timing.h>
> +#include <linux/of_graph.h>
>
> #include "imx-drm.h"
>
> @@ -208,7 +209,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
> {
> struct drm_device *drm = data;
> struct device_node *np = dev->of_node;
> - struct device_node *panel_node;
> + struct device_node *port;
> const u8 *edidp;
> struct imx_parallel_display *imxpd;
> int ret;
> @@ -234,11 +235,19 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
> imxpd->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
> }
>
> - panel_node = of_parse_phandle(np, "fsl,panel", 0);
> - if (panel_node) {
> - imxpd->panel = of_drm_find_panel(panel_node);
> - if (!imxpd->panel)
> - return -EPROBE_DEFER;
> + /* port@1 is the output port */
> + port = of_graph_get_port_by_id(np, 1);
> + if (port) {
> + struct device_node *endpoint, *remote;
> +
> + endpoint = of_get_child_by_name(port, "endpoint");
> + if (endpoint) {
> + remote = of_graph_get_remote_port_parent(endpoint);
> + if (remote)
> + imxpd->panel = of_drm_find_panel(remote);
> + if (!imxpd->panel)
> + return -EPROBE_DEFER;
> + }
> }
>
> imxpd->dev = dev;
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists