| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1432048104-4695-8-git-send-email-khandual@linux.vnet.ibm.com>
Date: Tue, 19 May 2015 20:38:03 +0530
From: Anshuman Khandual <khandual@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org
Cc: peterz@...radead.org, akpm@...ux-foundation.org,
tglx@...utronix.de, james.hogan@...tec.com, avagin@...nvz.org,
Paul.Clothier@...tec.com, palves@...hat.com, oleg@...hat.com,
dhowells@...hat.com, davej@...hat.com, davem@...emloft.net,
mikey@...ling.org, benh@...nel.crashing.org,
sukadev@...ux.vnet.ibm.com, mpe@...erman.id.au,
sam.bobroff@....ibm.com, kirjanov@...il.com,
shuahkh@....samsung.com, Ulrich.Weigand@...ibm.com,
emachado@...ux.vnet.ibm.com, nacc@...ux.vnet.ibm.com
Subject: [PATCH V8 07/28] powerpc, ptrace: Enable support for NT_PPC_CGPR
This patch enables support for TM checkpointed GPR register
set ELF core note NT_PPC_CGPR based ptrace requests through
PTRACE_GETREGSET, PTRACE_SETREGSET calls. This is achieved
through adding a register set REGSET_CGPR in powerpc
corresponding to the ELF core note section added. It
implements the get, set and active functions for this new
register set added.
Signed-off-by: Anshuman Khandual <khandual@...ux.vnet.ibm.com>
---
arch/powerpc/kernel/ptrace.c | 222 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 222 insertions(+)
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index a8e4d19..28b788b 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -180,6 +180,26 @@ static int set_user_msr(struct task_struct *task, unsigned long msr)
return 0;
}
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+static unsigned long get_user_ckpt_msr(struct task_struct *task)
+{
+ return task->thread.ckpt_regs.msr | task->thread.fpexc_mode;
+}
+
+static int set_user_ckpt_msr(struct task_struct *task, unsigned long msr)
+{
+ task->thread.ckpt_regs.msr &= ~MSR_DEBUGCHANGE;
+ task->thread.ckpt_regs.msr |= msr & MSR_DEBUGCHANGE;
+ return 0;
+}
+
+static int set_user_ckpt_trap(struct task_struct *task, unsigned long trap)
+{
+ task->thread.ckpt_regs.trap = trap & 0xfff0;
+ return 0;
+}
+#endif
+
#ifdef CONFIG_PPC64
static int get_user_dscr(struct task_struct *task, unsigned long *data)
{
@@ -846,6 +866,172 @@ static int evr_set(struct task_struct *target, const struct user_regset *regset,
}
#endif /* CONFIG_SPE */
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+/**
+ * tm_cgpr_active - get active number of registers in CGPR
+ * @target: The target task.
+ * @regset: The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed GPR category.
+ */
+static int tm_cgpr_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return 0;
+
+ return regset->n;
+}
+
+/**
+ * tm_cgpr_get - get CGPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy from.
+ * @ubuf: User buffer to copy into.
+ *
+ * This function gets transaction checkpointed GPR registers.
+ *
+ * When the transaction is active, 'ckpt_regs' holds all the checkpointed
+ * GPR register values for the current transaction to fall back on if it
+ * aborts in between. This function gets those checkpointed GPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * struct pt_regs ckpt_regs;
+ * };
+ */
+static int tm_cgpr_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+ flush_tmregs_to_thread(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs,
+ 0, offsetof(struct pt_regs, msr));
+ if (!ret) {
+ unsigned long msr = get_user_ckpt_msr(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
+ offsetof(struct pt_regs, msr),
+ offsetof(struct pt_regs, msr) +
+ sizeof(msr));
+ }
+
+ BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+ offsetof(struct pt_regs, msr) + sizeof(long));
+
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs.orig_gpr3,
+ offsetof(struct pt_regs, orig_gpr3),
+ sizeof(struct pt_regs));
+ if (!ret)
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ sizeof(struct pt_regs), -1);
+
+ return ret;
+}
+
+/*
+ * tm_cgpr_set - set the CGPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy into.
+ * @ubuf: User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed GPR registers.
+ *
+ * When the transaction is active, 'ckpt_regs' holds the checkpointed
+ * GPR register values for the current transaction to fall back on if it
+ * aborts in between. This function sets those checkpointed GPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * struct pt_regs ckpt_regs;
+ * };
+ */
+static int tm_cgpr_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ unsigned long reg;
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+ flush_tmregs_to_thread(target);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs,
+ 0, PT_MSR * sizeof(reg));
+
+ if (!ret && count > 0) {
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
+ PT_MSR * sizeof(reg),
+ (PT_MSR + 1) * sizeof(reg));
+ if (!ret)
+ ret = set_user_ckpt_msr(target, reg);
+ }
+
+ BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+ offsetof(struct pt_regs, msr) + sizeof(long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs.orig_gpr3,
+ PT_ORIG_R3 * sizeof(reg),
+ (PT_MAX_PUT_REG + 1) * sizeof(reg));
+
+ if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
+ ret = user_regset_copyin_ignore(
+ &pos, &count, &kbuf, &ubuf,
+ (PT_MAX_PUT_REG + 1) * sizeof(reg),
+ PT_TRAP * sizeof(reg));
+
+ if (!ret && count > 0) {
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
+ PT_TRAP * sizeof(reg),
+ (PT_TRAP + 1) * sizeof(reg));
+ if (!ret)
+ ret = set_user_ckpt_trap(target, reg);
+ }
+
+ if (!ret)
+ ret = user_regset_copyin_ignore(
+ &pos, &count, &kbuf, &ubuf,
+ (PT_TRAP + 1) * sizeof(reg), -1);
+
+ return ret;
+}
+#endif
/*
* These are our native regset flavors.
@@ -862,6 +1048,9 @@ enum powerpc_regset {
#ifdef CONFIG_SPE
REGSET_SPE,
#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ REGSET_TM_CGPR, /* TM checkpointed GPR registers */
+#endif
};
static const struct user_regset native_regsets[] = {
@@ -896,6 +1085,13 @@ static const struct user_regset native_regsets[] = {
.active = evr_active, .get = evr_get, .set = evr_set
},
#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ [REGSET_TM_CGPR] = {
+ .core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
+ .size = sizeof(long), .align = sizeof(long),
+ .active = tm_cgpr_active, .get = tm_cgpr_get, .set = tm_cgpr_set
+ },
+#endif
};
static const struct user_regset_view user_ppc_native_view = {
@@ -1058,6 +1254,24 @@ static int gpr32_set_common(struct task_struct *target,
(PT_TRAP + 1) * sizeof(reg), -1);
}
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+static int tm_cgpr32_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return gpr32_get_common(target, regset, pos, count, kbuf, ubuf, 1);
+}
+
+static int tm_cgpr32_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return gpr32_set_common(target, regset, pos, count, kbuf, ubuf, 1);
+}
+#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
+
static int gpr32_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
@@ -1102,6 +1316,14 @@ static const struct user_regset compat_regsets[] = {
.active = evr_active, .get = evr_get, .set = evr_set
},
#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ [REGSET_TM_CGPR] = {
+ .core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
+ .size = sizeof(long), .align = sizeof(long),
+ .active = tm_cgpr_active,
+ .get = tm_cgpr32_get, .set = tm_cgpr32_set
+ },
+#endif
};
static const struct user_regset_view user_ppc_compat_view = {
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists