| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <6126a5c4193d8a902c152dbe8e3da3cbdf939792.1432135632.git.Allen.Hubbe@emc.com>
Date: Wed, 20 May 2015 11:41:06 -0400
From: Allen Hubbe <Allen.Hubbe@....com>
To: linux-ntb@...glegroups.com
Cc: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
Jon Mason <jdmason@...zu.us>,
Dave Jiang <dave.jiang@...el.com>,
Allen Hubbe <Allen.Hubbe@....com>
Subject: [PATCH 05/16] Intel NTB params for snb b2b addresses
Add module parameters for the addresses to be used in b2b topology.
Signed-off-by: Allen Hubbe <Allen.Hubbe@....com>
---
Documentation/ntb.txt | 10 +++++
drivers/ntb/hw/intel/ntb_hw_intel.c | 77 ++++++++++++++++++++++++++++---------
2 files changed, 68 insertions(+), 19 deletions(-)
diff --git a/Documentation/ntb.txt b/Documentation/ntb.txt
index 725ba1e..00a3f92 100644
--- a/Documentation/ntb.txt
+++ b/Documentation/ntb.txt
@@ -56,3 +56,13 @@ Module Parameters:
* b2b\_mw\_share - If the peer ntb is to be accessed via a memory window, and if
the memory window is large enough, still allow the client to use the
second half of the memory window for address translation to the peer.
+* snb\_b2b\_usd\_bar2\_addr64 - If using B2B topology on Xeon hardware, use this
+ 64 bit address on the bus between the NTB devices for the window at
+ BAR2, on the upstream side of the link.
+* snb\_b2b\_usd\_bar4\_addr64 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_usd\_bar4\_addr32 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_usd\_bar5\_addr32 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar2\_addr64 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar4\_addr64 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar4\_addr32 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar5\_addr32 - See *snb\_b2b\_bar2\_addr64*.
diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
index 89fea50..7e19d46 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.c
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
@@ -72,20 +72,6 @@ MODULE_AUTHOR("Intel Corporation");
#define bar0_off(base, bar) ((base) + ((bar) << 2))
#define bar2_off(base, bar) bar0_off(base, (bar) - 2)
-static int b2b_mw_idx = -1;
-module_param(b2b_mw_idx, int, 0644);
-MODULE_PARM_DESC(b2b_mw_idx, "Use this mw idx to access the peer ntb. A "
- "value of zero or positive starts from first mw idx, and a "
- "negative value starts from last mw idx. Both sides MUST "
- "set the same value here!");
-
-static unsigned int b2b_mw_share;
-module_param(b2b_mw_share, uint, 0644);
-MODULE_PARM_DESC(b2b_mw_share, "If the b2b mw is large enough, configure the "
- "ntb so that the peer ntb only occupies the first half of "
- "the mw, so the second half can still be used as a mw. Both "
- "sides MUST set the same value here!");
-
static const struct intel_ntb_reg bwd_reg;
static const struct intel_ntb_alt_reg bwd_pri_reg;
static const struct intel_ntb_alt_reg bwd_sec_reg;
@@ -98,14 +84,67 @@ static const struct intel_ntb_alt_reg snb_sec_reg;
static const struct intel_ntb_alt_reg snb_b2b_reg;
static const struct intel_ntb_xlat_reg snb_pri_xlat;
static const struct intel_ntb_xlat_reg snb_sec_xlat;
-static const struct intel_b2b_addr snb_b2b_usd_addr;
-static const struct intel_b2b_addr snb_b2b_dsd_addr;
-
+static struct intel_b2b_addr snb_b2b_usd_addr;
+static struct intel_b2b_addr snb_b2b_dsd_addr;
static const struct ntb_dev_ops intel_ntb_ops;
static const struct file_operations intel_ntb_debugfs_info;
static struct dentry *debugfs_dir;
+static int b2b_mw_idx = -1;
+module_param(b2b_mw_idx, int, 0644);
+MODULE_PARM_DESC(b2b_mw_idx, "Use this mw idx to access the peer ntb. A "
+ "value of zero or positive starts from first mw idx, and a "
+ "negative value starts from last mw idx. Both sides MUST "
+ "set the same value here!");
+
+static unsigned int b2b_mw_share;
+module_param(b2b_mw_share, uint, 0644);
+MODULE_PARM_DESC(b2b_mw_share, "If the b2b mw is large enough, configure the "
+ "ntb so that the peer ntb only occupies the first half of "
+ "the mw, so the second half can still be used as a mw. Both "
+ "sides MUST set the same value here!");
+
+module_param_named(snb_b2b_usd_bar2_addr64,
+ snb_b2b_usd_addr.bar2_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+ "SNB B2B USD BAR 2 64-bit address");
+
+module_param_named(snb_b2b_usd_bar4_addr64,
+ snb_b2b_usd_addr.bar4_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+ "SNB B2B USD BAR 4 64-bit address");
+
+module_param_named(snb_b2b_usd_bar4_addr32,
+ snb_b2b_usd_addr.bar4_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+ "SNB B2B USD split-BAR 4 32-bit address");
+
+module_param_named(snb_b2b_usd_bar5_addr32,
+ snb_b2b_usd_addr.bar5_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+ "SNB B2B USD split-BAR 5 32-bit address");
+
+module_param_named(snb_b2b_dsd_bar2_addr64,
+ snb_b2b_dsd_addr.bar2_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+ "SNB B2B DSD BAR 2 64-bit address");
+
+module_param_named(snb_b2b_dsd_bar4_addr64,
+ snb_b2b_dsd_addr.bar4_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+ "SNB B2B DSD BAR 4 64-bit address");
+
+module_param_named(snb_b2b_dsd_bar4_addr32,
+ snb_b2b_dsd_addr.bar4_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+ "SNB B2B DSD split-BAR 4 32-bit address");
+
+module_param_named(snb_b2b_dsd_bar5_addr32,
+ snb_b2b_dsd_addr.bar5_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+ "SNB B2B DSD split-BAR 5 32-bit address");
+
#ifndef ioread64
#ifdef readq
#define ioread64 readq
@@ -2086,14 +2125,14 @@ static const struct intel_ntb_xlat_reg snb_sec_xlat = {
.bar2_xlat = SNB_SBAR23XLAT_OFFSET,
};
-static const struct intel_b2b_addr snb_b2b_usd_addr = {
+static struct intel_b2b_addr snb_b2b_usd_addr = {
.bar2_addr64 = SNB_B2B_BAR2_USD_ADDR64,
.bar4_addr64 = SNB_B2B_BAR4_USD_ADDR64,
.bar4_addr32 = SNB_B2B_BAR4_USD_ADDR32,
.bar5_addr32 = SNB_B2B_BAR5_USD_ADDR32,
};
-static const struct intel_b2b_addr snb_b2b_dsd_addr = {
+static struct intel_b2b_addr snb_b2b_dsd_addr = {
.bar2_addr64 = SNB_B2B_BAR2_DSD_ADDR64,
.bar4_addr64 = SNB_B2B_BAR4_DSD_ADDR64,
.bar4_addr32 = SNB_B2B_BAR4_DSD_ADDR32,
--
2.4.0.rc0.43.gcf8a8c6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists