lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 19 May 2015 18:23:33 -0700
From:	Ray Jui <rjui@...adcom.com>
To:	Kishon Vijay Abraham I <kishon@...com>
CC:	<linux-kernel@...r.kernel.org>,
	"JD (Jiandong) Zheng" <jdzheng@...adcom.com>,
	Arun Parameswaran <arunp@...adcom.com>,
	<bcm-kernel-feedback-list@...adcom.com>,
	Ray Jui <rjui@...adcom.com>
Subject: [PATCH 4/5] phy: cygnus: pcie: Add Cygnus PCIe PHY support

This patch adds the PCIe PHY support for the Broadcom PCIe RC interface

Signed-off-by: Ray Jui <rjui@...adcom.com>
Reviewed-by: Arun Parameswaran <aparames@...adcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@...adcom.com>
Reviewed-by: Scott Branden <sbranden@...adcom.com>
---
 drivers/phy/Kconfig           |   15 ++
 drivers/phy/Makefile          |    1 +
 drivers/phy/phy-cygnus-pcie.c |  340 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 356 insertions(+)
 create mode 100644 drivers/phy/phy-cygnus-pcie.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2664285..8250169 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -35,6 +35,21 @@ config ARMADA375_USBCLUSTER_PHY
 	depends on OF
 	select GENERIC_PHY
 
+config PHY_CYGNUS_PCIE
+	bool "Broadcom Cygnus PCIe PHY driver"
+	depends on ARCH_BCM_CYGNUS
+	select GENERIC_PHY
+	select PHY_IPROC_MDIO
+	default ARCH_BCM_CYGNUS
+	help
+	  Enable this to support the Broadcom Cygnus PCIe PHY.
+
+	  The host communicates with the PHY through the iProc MDC/MDIO
+	  interface.
+
+	  If unsure, say N.
+
+
 config PHY_DM816X_USB
 	tristate "TI dm816x USB PHY driver"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d989dd7b..6545950 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
+obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-cygnus-pcie.o
 obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
 obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
diff --git a/drivers/phy/phy-cygnus-pcie.c b/drivers/phy/phy-cygnus-pcie.c
new file mode 100644
index 0000000..5817cd4
--- /dev/null
+++ b/drivers/phy/phy-cygnus-pcie.c
@@ -0,0 +1,340 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/phy/iproc_mdio_phy.h>
+
+#define MAX_PHY_ADDR                  0x1f
+
+#define PCIE_MDCDIV_VAL               0x3e
+
+#define PCIE_BLK_ADDR_OFFSET          0x1f
+#define PCIE_BLK_ADDR_MASK            0xff00
+#define PCIE_REG_ADDR_MASK            0x1f
+
+#define PCIE_SW_CTRL0_OFFSET          0x1000
+#define PCIE_SW_PWRDOWN_SHIFT         0
+
+#define PCIE_AFE1_100MHZ_C3_OFFSET    0x2103
+#define PCIE_AFE1_100MHZ_C3_VAL       0x2b1c
+
+#define CRMU_PCIE_CFG_OFFSET          0x00
+#define CRMU_PCIE1_PHY_IDDQ_SHIFT     10
+#define CRMU_PCIE0_PHY_IDDQ_SHIFT     2
+
+enum cygnus_pcie_phy_id {
+	CYGNUS_PHY_PCIE0 = 0,
+	CYGNUS_PHY_PCIE1,
+	MAX_NUM_PHYS,
+};
+
+struct cygnus_pcie_phy_core;
+
+/**
+ * struct cygnus_pcie_phy - Cygnus PCIe PHY device
+ * @core: pointer to the Cygnus PCIe PHY core control
+ * @id: internal ID to identify the Cygnus PCIe PHY
+ * @addr: PHY address used by MDC to communicate with the PHY
+ * @phy: pointer to the kernel PHY device
+ *
+ */
+struct cygnus_pcie_phy {
+	struct cygnus_pcie_phy_core *core;
+	enum cygnus_pcie_phy_id id;
+	unsigned addr;
+	struct phy *phy;
+};
+
+/**
+ * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control
+ * @dev: pointer to device
+ * @crmu: CRMU register base
+ * @lock: mutex to protect access to individual PHYs
+ * @phys: pointer to Cygnus PHY device
+ *
+ */
+struct cygnus_pcie_phy_core {
+	struct device *dev;
+	void __iomem *crmu;
+	struct mutex lock;
+	struct cygnus_pcie_phy phys[MAX_NUM_PHYS];
+};
+
+static int cygnus_pcie_phy_reg_read(unsigned phy_addr, unsigned reg_addr,
+				    u16 *val)
+{
+	int ret;
+	u16 addr = (u16)(reg_addr & PCIE_BLK_ADDR_MASK);
+
+	ret = iproc_mdio_write(PCIE_MDCDIV_VAL, phy_addr, PCIE_BLK_ADDR_OFFSET,
+			       addr);
+	if (ret)
+		return ret;
+
+	ret = iproc_mdio_read(PCIE_MDCDIV_VAL, phy_addr,
+			      reg_addr & PCIE_REG_ADDR_MASK, val);
+	return ret;
+}
+
+static int cygnus_pcie_phy_reg_write(unsigned phy_addr, unsigned reg_addr,
+				     u16 val)
+{
+	int ret;
+	u16 addr = (u16)(reg_addr & PCIE_BLK_ADDR_MASK);
+
+	ret = iproc_mdio_write(PCIE_MDCDIV_VAL, phy_addr, PCIE_BLK_ADDR_OFFSET,
+			       addr);
+	if (ret)
+		return ret;
+
+	ret = iproc_mdio_write(PCIE_MDCDIV_VAL, phy_addr,
+			       reg_addr & PCIE_REG_ADDR_MASK, val);
+	return ret;
+}
+
+static void cygnus_pcie_afe_enable_disable(void __iomem *reg,
+					   enum cygnus_pcie_phy_id id,
+					   bool enable)
+{
+	unsigned shift;
+	u32 val;
+
+	if (id == CYGNUS_PHY_PCIE0)
+		shift = CRMU_PCIE0_PHY_IDDQ_SHIFT;
+	else
+		shift = CRMU_PCIE1_PHY_IDDQ_SHIFT;
+
+	if (enable) {
+		val = readl(reg + CRMU_PCIE_CFG_OFFSET);
+		val &= ~BIT(shift);
+		writel(val, reg + CRMU_PCIE_CFG_OFFSET);
+	} else {
+		val = readl(reg + CRMU_PCIE_CFG_OFFSET);
+		val |= BIT(shift);
+		writel(val, reg + CRMU_PCIE_CFG_OFFSET);
+	}
+
+	/* wait for AFE to come up or shut down */
+	msleep(100);
+}
+
+static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool on)
+{
+	struct cygnus_pcie_phy_core *core = phy->core;
+	u16 val;
+	int ret;
+
+	if (phy->id != CYGNUS_PHY_PCIE0 && phy->id != CYGNUS_PHY_PCIE1)
+		return -EINVAL;
+
+	if (on) {
+		/* enable AFE through the CRMU interface */
+		cygnus_pcie_afe_enable_disable(core->crmu, phy->id, true);
+
+		/* to get the reference clock configured */
+		ret = cygnus_pcie_phy_reg_write(phy->addr,
+						PCIE_AFE1_100MHZ_C3_OFFSET,
+						PCIE_AFE1_100MHZ_C3_VAL);
+		if (ret)
+			goto err_disable_afe;
+		cygnus_pcie_phy_reg_read(phy->addr,
+					 PCIE_AFE1_100MHZ_C3_OFFSET, &val);
+		if (ret)
+			goto err_disable_afe;
+
+		msleep(20);
+
+		/* now toggle AFE */
+		cygnus_pcie_afe_enable_disable(core->crmu, phy->id, false);
+		cygnus_pcie_afe_enable_disable(core->crmu, phy->id, true);
+
+		dev_info(core->dev,
+			 "pcie phy on, addr:0x%02x off:0x%04x val:0x%04x\n",
+			 phy->addr, PCIE_AFE1_100MHZ_C3_OFFSET, val);
+	} else {
+		/* disable AFE through the CRMU interface */
+		cygnus_pcie_afe_enable_disable(core->crmu, phy->id, false);
+		dev_info(core->dev, "pcie phy off\n");
+	}
+
+	return 0;
+
+err_disable_afe:
+	cygnus_pcie_afe_enable_disable(core->crmu, phy->id, false);
+	return ret;
+}
+
+static int cygnus_pcie_phy_init(struct phy *p)
+{
+	return 0;
+}
+
+static int cygnus_pcie_phy_exit(struct phy *p)
+{
+	return 0;
+}
+
+static int cygnus_pcie_phy_power_on(struct phy *p)
+{
+	struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+	struct cygnus_pcie_phy_core *core = phy->core;
+	int ret = 0;
+
+	mutex_lock(&core->lock);
+
+	switch (phy->id) {
+	case CYGNUS_PHY_PCIE0:
+	case CYGNUS_PHY_PCIE1:
+		ret = cygnus_pcie_power_config(phy, true);
+		if (ret)
+			dev_err(core->dev, "unable to power on PCIe PHY\n");
+		break;
+
+	default:
+		dev_err(core->dev, "PHY id not supported\n");
+		mutex_unlock(&core->lock);
+		return -EINVAL;
+	}
+
+	mutex_unlock(&core->lock);
+
+	return ret;
+}
+
+static int cygnus_pcie_phy_power_off(struct phy *p)
+{
+	struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+	struct cygnus_pcie_phy_core *core = phy->core;
+	int ret = 0;
+
+	mutex_lock(&core->lock);
+
+	switch (phy->id) {
+	case CYGNUS_PHY_PCIE0:
+	case CYGNUS_PHY_PCIE1:
+		ret = cygnus_pcie_power_config(phy, false);
+		if (ret)
+			dev_err(core->dev, "unable to power off PCIe PHY\n");
+		break;
+
+	default:
+		dev_err(core->dev, "PHY id not supported\n");
+		mutex_unlock(&core->lock);
+		break;
+	}
+
+	mutex_unlock(&core->lock);
+
+	return ret;
+}
+
+static struct phy_ops cygnus_pcie_phy_ops = {
+	.init = cygnus_pcie_phy_init,
+	.exit = cygnus_pcie_phy_exit,
+	.power_on = cygnus_pcie_phy_power_on,
+	.power_off = cygnus_pcie_phy_power_off,
+};
+
+static struct phy *cygnus_pcie_phy_xlate(struct device *dev,
+					 struct of_phandle_args *args)
+{
+	struct cygnus_pcie_phy_core *core;
+	int id, phy_addr;
+
+	core = dev_get_drvdata(dev);
+	if (!core)
+		return ERR_PTR(-EINVAL);
+
+	id = args->args[0];
+	phy_addr = args->args[1];
+
+	if (WARN_ON(id >= MAX_NUM_PHYS))
+		return ERR_PTR(-ENODEV);
+
+	if (WARN_ON(phy_addr > MAX_PHY_ADDR))
+		return ERR_PTR(-ENODEV);
+
+	core->phys[id].addr = phy_addr;
+
+	return core->phys[id].phy;
+}
+
+static int cygnus_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cygnus_pcie_phy_core *core;
+	struct phy_provider *provider;
+	struct resource *res;
+	int i = 0;
+
+	core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	core->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	core->crmu = devm_ioremap_resource(dev, res);
+	if (IS_ERR(core->crmu))
+		return PTR_ERR(core->crmu);
+
+	mutex_init(&core->lock);
+
+	for (i = 0; i < MAX_NUM_PHYS; i++) {
+		struct cygnus_pcie_phy *p = &core->phys[i];
+
+		p->phy = devm_phy_create(dev, NULL, &cygnus_pcie_phy_ops);
+		if (IS_ERR(p->phy)) {
+			dev_err(dev, "failed to create PHY\n");
+			return PTR_ERR(p->phy);
+		}
+
+		p->core = core;
+		p->id = i;
+		phy_set_drvdata(p->phy, p);
+	}
+
+	dev_set_drvdata(dev, core);
+
+	provider = devm_of_phy_provider_register(dev, cygnus_pcie_phy_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id cygnus_pcie_phy_match_table[] = {
+	{ .compatible = "brcm,cygnus-pcie-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table);
+
+static struct platform_driver cygnus_pcie_phy_driver = {
+	.driver = {
+		.name		= "cygnus-pcie-phy",
+		.of_match_table	= cygnus_pcie_phy_match_table,
+	},
+	.probe	= cygnus_pcie_phy_probe,
+};
+module_platform_driver(cygnus_pcie_phy_driver);
+
+MODULE_AUTHOR("Ray Jui <rjui@...adcom.com>");
+MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists