| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <555DD4C2.80406@ti.com>
Date: Thu, 21 May 2015 18:21:14 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Rob Herring <robh@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Stern <stern@...land.harvard.edu>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-usb@...r.kernel.org>
Subject: Re: [PATCH 4/5] phy: add Marvell HSIC 28nm PHY
On Thursday 21 May 2015 06:15 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Thursday 14 May 2015 04:18 AM, Rob Herring wrote:
>> Add PHY driver for the Marvell HSIC 28nm PHY. This PHY is found in PXA1928
>> SOC.
>>
>> Signed-off-by: Rob Herring <robh@...nel.org>
>> Cc: Kishon Vijay Abraham I <kishon@...com>
>> ---
>> drivers/phy/Kconfig | 10 +++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-mv-hsic.c | 208 ++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 219 insertions(+)
>> create mode 100644 drivers/phy/phy-mv-hsic.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index ef7634f..cfcae72 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -52,6 +52,16 @@ config PHY_EXYNOS_MIPI_VIDEO
>> Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
>> and EXYNOS SoCs.
>>
>> +config PHY_MV_HSIC
>> + tristate "Marvell USB HSIC 28nm PHY Driver"
>> + select GENERIC_PHY
>> + help
>> + Enable this to support Marvell USB HSIC PHY driver for Marvell
>> + SoC. This driver will do the PHY initialization and shutdown.
>> + The PHY driver will be used by Marvell ehci driver.
>> +
>> + To compile this driver as a module, choose M here.
>> +
>> config PHY_MV_USB2
>> tristate "Marvell USB 2.0 28nm PHY Driver"
>> select GENERIC_PHY
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 768e55a..472bf0a 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
>> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
>> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
>> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
>> +obj-$(CONFIG_PHY_MV_HSIC) += phy-mv-hsic.o
>> obj-$(CONFIG_PHY_MV_USB2) += phy-mv-usb2.o
>> obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
>> obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
>> diff --git a/drivers/phy/phy-mv-hsic.c b/drivers/phy/phy-mv-hsic.c
>> new file mode 100644
>> index 0000000..aa6cccd
>> --- /dev/null
>> +++ b/drivers/phy/phy-mv-hsic.c
>> @@ -0,0 +1,208 @@
>> +/*
>> + * Copyright (C) 2015 Linaro, Ltd.
>> + * Rob Herring <robh@...nel.org>
>> + *
>> + * Based on vendor driver:
>> + * Copyright (C) 2013 Marvell Inc.
>> + * Author: Chao Xie <xiechao.mail@...il.com>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/clk.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/phy/phy.h>
>> +
>> +#define PHY_28NM_HSIC_CTRL 0x08
>> +#define PHY_28NM_HSIC_IMPCAL_CAL 0x18
>> +#define PHY_28NM_HSIC_PLL_CTRL01 0x1c
>> +#define PHY_28NM_HSIC_PLL_CTRL2 0x20
>> +#define PHY_28NM_HSIC_INT 0x28
>> +
>> +#define PHY_28NM_HSIC_PLL_SELLPFR_SHIFT 26
>> +#define PHY_28NM_HSIC_PLL_FBDIV_SHIFT 0
>> +#define PHY_28NM_HSIC_PLL_REFDIV_SHIFT 9
>> +
>> +#define PHY_28NM_HSIC_S2H_PU_PLL BIT(10)
>> +#define PHY_28NM_HSIC_H2S_PLL_LOCK BIT(15)
>> +#define PHY_28NM_HSIC_S2H_HSIC_EN BIT(7)
>> +#define S2H_DRV_SE0_4RESUME BIT(14)
>> +#define PHY_28NM_HSIC_H2S_IMPCAL_DONE BIT(27)
>> +
>> +#define PHY_28NM_HSIC_CONNECT_INT BIT(1)
>> +#define PHY_28NM_HSIC_HS_READY_INT BIT(2)
>> +
>> +struct mv_hsic_phy {
>> + struct phy *phy;
>> + struct platform_device *pdev;
>> + void __iomem *base;
>> + struct clk *clk;
>> +};
>> +
>> +static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
>> +{
>> + timeout += jiffies;
>> + while (time_is_after_eq_jiffies(timeout)) {
>> + if ((readl(reg) & mask) == mask)
>> + return true;
>> + msleep(1);
>> + }
>> + return false;
>> +}
>> +
>> +static int mv_hsic_phy_init(struct phy *phy)
>> +{
>> + struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
>> + struct platform_device *pdev = mv_phy->pdev;
>> + void __iomem *base = mv_phy->base;
>> +
>> + clk_prepare_enable(mv_phy->clk);
>> +
>> + /* Set reference clock */
>> + writel(0x1 << PHY_28NM_HSIC_PLL_SELLPFR_SHIFT |
>> + 0xf0 << PHY_28NM_HSIC_PLL_FBDIV_SHIFT |
>> + 0xd << PHY_28NM_HSIC_PLL_REFDIV_SHIFT,
>> + base + PHY_28NM_HSIC_PLL_CTRL01);
>> +
>> + /* Turn on PLL */
>> + writel(readl(base + PHY_28NM_HSIC_PLL_CTRL2) |
>> + PHY_28NM_HSIC_S2H_PU_PLL,
>> + base + PHY_28NM_HSIC_PLL_CTRL2);
>> +
>> + /* Make sure PHY PLL is locked */
>> + if (!wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2,
>> + PHY_28NM_HSIC_H2S_PLL_LOCK, HZ / 10)) {
>> + dev_err(&pdev->dev, "HSIC PHY PLL not locked after 100mS.");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + /* Avoid SE0 state when resume for some device will take it as reset */
>> + writel(readl(base + PHY_28NM_HSIC_CTRL) & ~S2H_DRV_SE0_4RESUME,
>> + base + PHY_28NM_HSIC_CTRL);
>> +
>> + /* Enable HSIC PHY */
>> + writel(readl(base + PHY_28NM_HSIC_CTRL) | PHY_28NM_HSIC_S2H_HSIC_EN,
>> + base + PHY_28NM_HSIC_CTRL);
>> +
>> + /* Calibration Timing
>> + * ____________________________
>> + * CAL START ___|
>> + * ____________________
>> + * CAL_DONE ___________|
>> + * | 400us |
>> + */
>
> Please use the comment style used here
> http://lxr.free-electrons.com/source/Documentation/CodingStyle#L464
>
>> +
>> + /* Make sure PHY Calibration is ready */
>> + if (!wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL,
>> + PHY_28NM_HSIC_H2S_IMPCAL_DONE, HZ / 10)) {
>> + dev_warn(&pdev->dev, "HSIC PHY READY not set after 100mS.");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + /* Waiting for HSIC connect int*/
>> + if (!wait_for_reg(base + PHY_28NM_HSIC_INT,
>> + PHY_28NM_HSIC_CONNECT_INT, HZ / 5)) {
>> + dev_warn(&pdev->dev, "HSIC wait for connect interrupt timeout.");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int mv_hsic_phy_power_on(struct phy *phy)
>> +{
>> + struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
>> + struct platform_device *pdev = mv_phy->pdev;
>> +
>> + /* check HS ready */
>> + if (!wait_for_reg(mv_phy->base + PHY_28NM_HSIC_INT,
>> + PHY_28NM_HSIC_HS_READY_INT, HZ / 10)) {
>> + dev_err(&pdev->dev, "HSIC HS_READY not set\n");
>> + return -ETIMEDOUT;
>> + }
>> + return 0;
>> +}
>> +
>> +static int mv_hsic_phy_power_off(struct phy *phy)
>> +{
>> + struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
>> + void __iomem *base = mv_phy->base;
>> +
>> + writel(readl(base + PHY_28NM_HSIC_CTRL) & ~PHY_28NM_HSIC_S2H_HSIC_EN,
>> + base + PHY_28NM_HSIC_CTRL);
>> +
>> + clk_disable_unprepare(mv_phy->clk);
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops hsic_ops = {
>> + .init = mv_hsic_phy_init,
>> + .power_on = mv_hsic_phy_power_on,
>> + .power_off = mv_hsic_phy_power_off,
>
> exit callback is missing? Shouldn't we turn off the PLLs in exit callback?
Also add the .owner member since this driver can be used as module.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists