| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <555DDB52.5030301@ti.com>
Date: Thu, 21 May 2015 18:49:14 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Ray Jui <rjui@...adcom.com>
CC: <linux-kernel@...r.kernel.org>,
"JD (Jiandong) Zheng" <jdzheng@...adcom.com>,
Arun Parameswaran <arunp@...adcom.com>,
<bcm-kernel-feedback-list@...adcom.com>
Subject: Re: [PATCH 4/5] phy: cygnus: pcie: Add Cygnus PCIe PHY support
On Wednesday 20 May 2015 06:53 AM, Ray Jui wrote:
> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>
> Signed-off-by: Ray Jui <rjui@...adcom.com>
> Reviewed-by: Arun Parameswaran <aparames@...adcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@...adcom.com>
> Reviewed-by: Scott Branden <sbranden@...adcom.com>
> ---
> drivers/phy/Kconfig | 15 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-cygnus-pcie.c | 340 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 356 insertions(+)
> create mode 100644 drivers/phy/phy-cygnus-pcie.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 2664285..8250169 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -35,6 +35,21 @@ config ARMADA375_USBCLUSTER_PHY
> depends on OF
> select GENERIC_PHY
>
> +config PHY_CYGNUS_PCIE
> + bool "Broadcom Cygnus PCIe PHY driver"
> + depends on ARCH_BCM_CYGNUS
> + select GENERIC_PHY
> + select PHY_IPROC_MDIO
> + default ARCH_BCM_CYGNUS
> + help
> + Enable this to support the Broadcom Cygnus PCIe PHY.
> +
> + The host communicates with the PHY through the iProc MDC/MDIO
> + interface.
> +
> + If unsure, say N.
> +
> +
trailing blank line
> config PHY_DM816X_USB
> tristate "TI dm816x USB PHY driver"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index d989dd7b..6545950 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-cygnus-pcie.o
> obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> diff --git a/drivers/phy/phy-cygnus-pcie.c b/drivers/phy/phy-cygnus-pcie.c
> new file mode 100644
> index 0000000..5817cd4
> --- /dev/null
> +++ b/drivers/phy/phy-cygnus-pcie.c
> @@ -0,0 +1,340 @@
> +/*
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/iproc_mdio_phy.h>
> +
> +#define MAX_PHY_ADDR 0x1f
> +
> +#define PCIE_MDCDIV_VAL 0x3e
> +
> +#define PCIE_BLK_ADDR_OFFSET 0x1f
> +#define PCIE_BLK_ADDR_MASK 0xff00
> +#define PCIE_REG_ADDR_MASK 0x1f
> +
> +#define PCIE_SW_CTRL0_OFFSET 0x1000
> +#define PCIE_SW_PWRDOWN_SHIFT 0
> +
> +#define PCIE_AFE1_100MHZ_C3_OFFSET 0x2103
> +#define PCIE_AFE1_100MHZ_C3_VAL 0x2b1c
> +
> +#define CRMU_PCIE_CFG_OFFSET 0x00
> +#define CRMU_PCIE1_PHY_IDDQ_SHIFT 10
> +#define CRMU_PCIE0_PHY_IDDQ_SHIFT 2
> +
> +enum cygnus_pcie_phy_id {
> + CYGNUS_PHY_PCIE0 = 0,
> + CYGNUS_PHY_PCIE1,
> + MAX_NUM_PHYS,
> +};
> +
> +struct cygnus_pcie_phy_core;
> +
> +/**
> + * struct cygnus_pcie_phy - Cygnus PCIe PHY device
> + * @core: pointer to the Cygnus PCIe PHY core control
> + * @id: internal ID to identify the Cygnus PCIe PHY
> + * @addr: PHY address used by MDC to communicate with the PHY
> + * @phy: pointer to the kernel PHY device
> + *
> + */
> +struct cygnus_pcie_phy {
> + struct cygnus_pcie_phy_core *core;
> + enum cygnus_pcie_phy_id id;
> + unsigned addr;
> + struct phy *phy;
> +};
> +
> +/**
> + * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control
> + * @dev: pointer to device
> + * @crmu: CRMU register base
> + * @lock: mutex to protect access to individual PHYs
> + * @phys: pointer to Cygnus PHY device
> + *
> + */
> +struct cygnus_pcie_phy_core {
> + struct device *dev;
> + void __iomem *crmu;
> + struct mutex lock;
> + struct cygnus_pcie_phy phys[MAX_NUM_PHYS];
> +};
> +
> +static int cygnus_pcie_phy_reg_read(unsigned phy_addr, unsigned reg_addr,
> + u16 *val)
> +{
> + int ret;
> + u16 addr = (u16)(reg_addr & PCIE_BLK_ADDR_MASK);
> +
> + ret = iproc_mdio_write(PCIE_MDCDIV_VAL, phy_addr, PCIE_BLK_ADDR_OFFSET,
> + addr);
> + if (ret)
> + return ret;
> +
> + ret = iproc_mdio_read(PCIE_MDCDIV_VAL, phy_addr,
> + reg_addr & PCIE_REG_ADDR_MASK, val);
> + return ret;
> +}
> +
> +static int cygnus_pcie_phy_reg_write(unsigned phy_addr, unsigned reg_addr,
> + u16 val)
> +{
> + int ret;
> + u16 addr = (u16)(reg_addr & PCIE_BLK_ADDR_MASK);
> +
> + ret = iproc_mdio_write(PCIE_MDCDIV_VAL, phy_addr, PCIE_BLK_ADDR_OFFSET,
> + addr);
> + if (ret)
> + return ret;
> +
> + ret = iproc_mdio_write(PCIE_MDCDIV_VAL, phy_addr,
> + reg_addr & PCIE_REG_ADDR_MASK, val);
> + return ret;
> +}
> +
> +static void cygnus_pcie_afe_enable_disable(void __iomem *reg,
> + enum cygnus_pcie_phy_id id,
> + bool enable)
> +{
> + unsigned shift;
> + u32 val;
> +
> + if (id == CYGNUS_PHY_PCIE0)
> + shift = CRMU_PCIE0_PHY_IDDQ_SHIFT;
> + else
> + shift = CRMU_PCIE1_PHY_IDDQ_SHIFT;
> +
> + if (enable) {
> + val = readl(reg + CRMU_PCIE_CFG_OFFSET);
> + val &= ~BIT(shift);
> + writel(val, reg + CRMU_PCIE_CFG_OFFSET);
> + } else {
> + val = readl(reg + CRMU_PCIE_CFG_OFFSET);
> + val |= BIT(shift);
> + writel(val, reg + CRMU_PCIE_CFG_OFFSET);
> + }
> +
> + /* wait for AFE to come up or shut down */
> + msleep(100);
> +}
> +
> +static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool on)
> +{
> + struct cygnus_pcie_phy_core *core = phy->core;
> + u16 val;
> + int ret;
> +
> + if (phy->id != CYGNUS_PHY_PCIE0 && phy->id != CYGNUS_PHY_PCIE1)
> + return -EINVAL;
> +
> + if (on) {
> + /* enable AFE through the CRMU interface */
> + cygnus_pcie_afe_enable_disable(core->crmu, phy->id, true);
> +
> + /* to get the reference clock configured */
> + ret = cygnus_pcie_phy_reg_write(phy->addr,
> + PCIE_AFE1_100MHZ_C3_OFFSET,
> + PCIE_AFE1_100MHZ_C3_VAL);
> + if (ret)
> + goto err_disable_afe;
> + cygnus_pcie_phy_reg_read(phy->addr,
> + PCIE_AFE1_100MHZ_C3_OFFSET, &val);
> + if (ret)
> + goto err_disable_afe;
> +
> + msleep(20);
> +
> + /* now toggle AFE */
> + cygnus_pcie_afe_enable_disable(core->crmu, phy->id, false);
> + cygnus_pcie_afe_enable_disable(core->crmu, phy->id, true);
> +
> + dev_info(core->dev,
> + "pcie phy on, addr:0x%02x off:0x%04x val:0x%04x\n",
> + phy->addr, PCIE_AFE1_100MHZ_C3_OFFSET, val);
> + } else {
> + /* disable AFE through the CRMU interface */
> + cygnus_pcie_afe_enable_disable(core->crmu, phy->id, false);
> + dev_info(core->dev, "pcie phy off\n");
> + }
> +
> + return 0;
> +
> +err_disable_afe:
> + cygnus_pcie_afe_enable_disable(core->crmu, phy->id, false);
> + return ret;
> +}
> +
> +static int cygnus_pcie_phy_init(struct phy *p)
> +{
> + return 0;
> +}
> +
> +static int cygnus_pcie_phy_exit(struct phy *p)
> +{
> + return 0;
> +}
empty callbacks are not required.
> +
> +static int cygnus_pcie_phy_power_on(struct phy *p)
> +{
> + struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
> + struct cygnus_pcie_phy_core *core = phy->core;
> + int ret = 0;
> +
> + mutex_lock(&core->lock);
> +
> + switch (phy->id) {
> + case CYGNUS_PHY_PCIE0:
> + case CYGNUS_PHY_PCIE1:
> + ret = cygnus_pcie_power_config(phy, true);
> + if (ret)
> + dev_err(core->dev, "unable to power on PCIe PHY\n");
> + break;
> +
> + default:
> + dev_err(core->dev, "PHY id not supported\n");
> + mutex_unlock(&core->lock);
> + return -EINVAL;
> + }
> +
> + mutex_unlock(&core->lock);
> +
> + return ret;
> +}
> +
> +static int cygnus_pcie_phy_power_off(struct phy *p)
> +{
> + struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
> + struct cygnus_pcie_phy_core *core = phy->core;
> + int ret = 0;
> +
> + mutex_lock(&core->lock);
> +
> + switch (phy->id) {
> + case CYGNUS_PHY_PCIE0:
> + case CYGNUS_PHY_PCIE1:
> + ret = cygnus_pcie_power_config(phy, false);
> + if (ret)
> + dev_err(core->dev, "unable to power off PCIe PHY\n");
> + break;
> +
> + default:
> + dev_err(core->dev, "PHY id not supported\n");
> + mutex_unlock(&core->lock);
> + break;
> + }
> +
> + mutex_unlock(&core->lock);
> +
> + return ret;
> +}
> +
> +static struct phy_ops cygnus_pcie_phy_ops = {
> + .init = cygnus_pcie_phy_init,
> + .exit = cygnus_pcie_phy_exit,
> + .power_on = cygnus_pcie_phy_power_on,
> + .power_off = cygnus_pcie_phy_power_off,
> +};
> +
> +static struct phy *cygnus_pcie_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct cygnus_pcie_phy_core *core;
> + int id, phy_addr;
> +
> + core = dev_get_drvdata(dev);
> + if (!core)
> + return ERR_PTR(-EINVAL);
> +
> + id = args->args[0];
> + phy_addr = args->args[1];
> +
> + if (WARN_ON(id >= MAX_NUM_PHYS))
> + return ERR_PTR(-ENODEV);
> +
> + if (WARN_ON(phy_addr > MAX_PHY_ADDR))
> + return ERR_PTR(-ENODEV);
> +
> + core->phys[id].addr = phy_addr;
> +
> + return core->phys[id].phy;
> +}
> +
> +static int cygnus_pcie_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct cygnus_pcie_phy_core *core;
> + struct phy_provider *provider;
> + struct resource *res;
> + int i = 0;
> +
> + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
> + if (!core)
> + return -ENOMEM;
> +
> + core->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + core->crmu = devm_ioremap_resource(dev, res);
> + if (IS_ERR(core->crmu))
> + return PTR_ERR(core->crmu);
> +
> + mutex_init(&core->lock);
> +
> + for (i = 0; i < MAX_NUM_PHYS; i++) {
> + struct cygnus_pcie_phy *p = &core->phys[i];
> +
> + p->phy = devm_phy_create(dev, NULL, &cygnus_pcie_phy_ops);
> + if (IS_ERR(p->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(p->phy);
> + }
> +
> + p->core = core;
> + p->id = i;
> + phy_set_drvdata(p->phy, p);
> + }
> +
> + dev_set_drvdata(dev, core);
> +
> + provider = devm_of_phy_provider_register(dev, cygnus_pcie_phy_xlate);
> + if (IS_ERR(provider)) {
> + dev_err(dev, "failed to register PHY provider\n");
> + return PTR_ERR(provider);
> + }
PTR_ERR_OR_ZERO(phy_provider)?
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists