| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1432309340-13688-4-git-send-email-javier.martinez@collabora.co.uk>
Date: Fri, 22 May 2015 17:42:16 +0200
From: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
To: Lee Jones <lee.jones@...aro.org>
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Olof Johansson <olof@...om.net>,
Doug Anderson <dianders@...omium.org>,
Bill Richardson <wfrichar@...omium.org>,
Simon Glass <sjg@...gle.com>,
Gwendal Grignou <gwendal@...gle.com>,
Stephen Barber <smbarber@...omium.org>,
Filipe Brandenburger <filbranden@...gle.com>,
Todd Broch <tbroch@...omium.org>,
Alexandru M Stan <amstan@...omium.org>,
Heiko Stuebner <heiko@...ech.de>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Subject: [PATCH v3 3/7] mfd: cros_ec: Move protocol helpers out of the MFD driver
The MFD driver should only have the logic to instantiate its child devices
and setup any shared resources that will be used by the subdevices drivers.
The cros_ec MFD is more complex than expected since it also has helpers to
communicate with the EC. So the driver will only get more bigger as other
protocols are supported in the future. So move the communication protocol
helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c.
Suggested-by: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
---
Changes since v2: None, new patch.
---
drivers/i2c/busses/Kconfig | 2 +-
drivers/input/keyboard/Kconfig | 2 +-
drivers/mfd/Kconfig | 5 +-
drivers/mfd/cros_ec.c | 96 --------------------------
drivers/platform/chrome/Kconfig | 9 ++-
drivers/platform/chrome/Makefile | 1 +
drivers/platform/chrome/cros_ec_proto.c | 115 ++++++++++++++++++++++++++++++++
7 files changed, 128 insertions(+), 102 deletions(-)
create mode 100644 drivers/platform/chrome/cros_ec_proto.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2255af23b9c7..5f1c1c4f5d87 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1103,7 +1103,7 @@ config I2C_SIBYTE
config I2C_CROS_EC_TUNNEL
tristate "ChromeOS EC tunnel I2C bus"
- depends on MFD_CROS_EC
+ depends on CROS_EC_PROTO
help
If you say yes here you get an I2C bus that will tunnel i2c commands
through to the other side of the ChromeOS EC to the i2c bus
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 106fbac7f8c5..e8eb60c6d83e 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -677,7 +677,7 @@ config KEYBOARD_W90P910
config KEYBOARD_CROS_EC
tristate "ChromeOS EC keyboard"
select INPUT_MATRIXKMAP
- depends on MFD_CROS_EC
+ depends on CROS_EC_PROTO
help
Say Y here to enable the matrix keyboard used by ChromeOS devices
and implemented on the ChromeOS EC. You must enable one bus option
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d5ad04dad081..927ba61e5bf9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -94,6 +94,7 @@ config MFD_AXP20X
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
+ select CROS_EC_PROTO
help
If you say Y here you get support for the ChromeOS Embedded
Controller (EC) providing keyboard, battery and power services.
@@ -102,7 +103,7 @@ config MFD_CROS_EC
config MFD_CROS_EC_I2C
tristate "ChromeOS Embedded Controller (I2C)"
- depends on MFD_CROS_EC && I2C
+ depends on MFD_CROS_EC && CROS_EC_PROTO && I2C
help
If you say Y here, you get support for talking to the ChromeOS
@@ -112,7 +113,7 @@ config MFD_CROS_EC_I2C
config MFD_CROS_EC_SPI
tristate "ChromeOS Embedded Controller (SPI)"
- depends on MFD_CROS_EC && SPI && OF
+ depends on MFD_CROS_EC && CROS_EC_PROTO && SPI && OF
---help---
If you say Y here, you get support for talking to the ChromeOS EC
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 4a0f6dfcd376..d857f6a2b57b 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -23,102 +23,6 @@
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
-#include <linux/delay.h>
-
-#define EC_COMMAND_RETRIES 50
-
-int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg)
-{
- uint8_t *out;
- int csum, i;
-
- BUG_ON(msg->outsize > EC_PROTO2_MAX_PARAM_SIZE);
- out = ec_dev->dout;
- out[0] = EC_CMD_VERSION0 + msg->version;
- out[1] = msg->command;
- out[2] = msg->outsize;
- csum = out[0] + out[1] + out[2];
- for (i = 0; i < msg->outsize; i++)
- csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->data[i];
- out[EC_MSG_TX_HEADER_BYTES + msg->outsize] = (uint8_t)(csum & 0xff);
-
- return EC_MSG_TX_PROTO_BYTES + msg->outsize;
-}
-EXPORT_SYMBOL(cros_ec_prepare_tx);
-
-int cros_ec_check_result(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg)
-{
- switch (msg->result) {
- case EC_RES_SUCCESS:
- return 0;
- case EC_RES_IN_PROGRESS:
- dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
- msg->command);
- return -EAGAIN;
- default:
- dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
- msg->command, msg->result);
- return 0;
- }
-}
-EXPORT_SYMBOL(cros_ec_check_result);
-
-int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg)
-{
- int ret;
-
- mutex_lock(&ec_dev->lock);
- ret = ec_dev->cmd_xfer(ec_dev, msg);
- if (msg->result == EC_RES_IN_PROGRESS) {
- int i;
- struct cros_ec_command *status_msg;
- struct ec_response_get_comms_status *status;
-
- status_msg = kmalloc(sizeof(*status_msg) + sizeof(*status),
- GFP_KERNEL);
- if (!status_msg) {
- ret = -ENOMEM;
- goto exit;
- }
-
- status_msg->version = 0;
- status_msg->command = EC_CMD_GET_COMMS_STATUS;
- status_msg->insize = sizeof(*status);
- status_msg->outsize = 0;
-
- /*
- * Query the EC's status until it's no longer busy or
- * we encounter an error.
- */
- for (i = 0; i < EC_COMMAND_RETRIES; i++) {
- usleep_range(10000, 11000);
-
- ret = ec_dev->cmd_xfer(ec_dev, status_msg);
- if (ret < 0)
- break;
-
- msg->result = status_msg->result;
- if (status_msg->result != EC_RES_SUCCESS)
- break;
-
- status = (struct ec_response_get_comms_status *)
- status_msg->data;
- if (!(status->flags & EC_COMMS_STATUS_PROCESSING))
- break;
- }
-
- kfree(status_msg);
- }
-exit:
- mutex_unlock(&ec_dev->lock);
-
- return ret;
-}
-EXPORT_SYMBOL(cros_ec_cmd_xfer);
static const struct mfd_cell cros_devs[] = {
{
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 2a6531a5fde8..cb1329919527 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -40,7 +40,7 @@ config CHROMEOS_PSTORE
config CROS_EC_CHARDEV
tristate "Chrome OS Embedded Controller userspace device interface"
- depends on MFD_CROS_EC
+ depends on CROS_EC_PROTO
---help---
This driver adds support to talk with the ChromeOS EC from userspace.
@@ -49,7 +49,7 @@ config CROS_EC_CHARDEV
config CROS_EC_LPC
tristate "ChromeOS Embedded Controller (LPC)"
- depends on MFD_CROS_EC && (X86 || COMPILE_TEST)
+ depends on MFD_CROS_EC && CROS_EC_PROTO && (X86 || COMPILE_TEST)
help
If you say Y here, you get support for talking to the ChromeOS EC
over an LPC bus. This uses a simple byte-level protocol with a
@@ -59,4 +59,9 @@ config CROS_EC_LPC
To compile this driver as a module, choose M here: the
module will be called cros_ec_lpc.
+config CROS_EC_PROTO
+ bool
+ help
+ ChromeOS EC communication protocol helpers.
+
endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index bd8d8601e875..4a11b010f5d8 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o
cros_ec_devs-objs := cros_ec_dev.o cros_ec_sysfs.o cros_ec_lightbar.o
obj-$(CONFIG_CROS_EC_CHARDEV) += cros_ec_devs.o
obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpc.o
+obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
new file mode 100644
index 000000000000..58e98a24fd08
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -0,0 +1,115 @@
+/*
+ * ChromeOS EC communication protocol helper functions
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mfd/cros_ec.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define EC_COMMAND_RETRIES 50
+
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ uint8_t *out;
+ int csum, i;
+
+ BUG_ON(msg->outsize > EC_PROTO2_MAX_PARAM_SIZE);
+ out = ec_dev->dout;
+ out[0] = EC_CMD_VERSION0 + msg->version;
+ out[1] = msg->command;
+ out[2] = msg->outsize;
+ csum = out[0] + out[1] + out[2];
+ for (i = 0; i < msg->outsize; i++)
+ csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->data[i];
+ out[EC_MSG_TX_HEADER_BYTES + msg->outsize] = (uint8_t)(csum & 0xff);
+
+ return EC_MSG_TX_PROTO_BYTES + msg->outsize;
+}
+EXPORT_SYMBOL(cros_ec_prepare_tx);
+
+int cros_ec_check_result(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ switch (msg->result) {
+ case EC_RES_SUCCESS:
+ return 0;
+ case EC_RES_IN_PROGRESS:
+ dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
+ msg->command);
+ return -EAGAIN;
+ default:
+ dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
+ msg->command, msg->result);
+ return 0;
+ }
+}
+EXPORT_SYMBOL(cros_ec_check_result);
+
+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ int ret;
+
+ mutex_lock(&ec_dev->lock);
+ ret = ec_dev->cmd_xfer(ec_dev, msg);
+ if (msg->result == EC_RES_IN_PROGRESS) {
+ int i;
+ struct cros_ec_command *status_msg;
+ struct ec_response_get_comms_status *status;
+
+ status_msg = kmalloc(sizeof(*status_msg) + sizeof(*status),
+ GFP_KERNEL);
+ if (!status_msg) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ status_msg->version = 0;
+ status_msg->command = EC_CMD_GET_COMMS_STATUS;
+ status_msg->insize = sizeof(*status);
+ status_msg->outsize = 0;
+
+ /*
+ * Query the EC's status until it's no longer busy or
+ * we encounter an error.
+ */
+ for (i = 0; i < EC_COMMAND_RETRIES; i++) {
+ usleep_range(10000, 11000);
+
+ ret = ec_dev->cmd_xfer(ec_dev, status_msg);
+ if (ret < 0)
+ break;
+
+ msg->result = status_msg->result;
+ if (status_msg->result != EC_RES_SUCCESS)
+ break;
+
+ status = (struct ec_response_get_comms_status *)
+ status_msg->data;
+ if (!(status->flags & EC_COMMS_STATUS_PROCESSING))
+ break;
+ }
+
+ kfree(status_msg);
+ }
+exit:
+ mutex_unlock(&ec_dev->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(cros_ec_cmd_xfer);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists