[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5566ACCD.9080203@denx.de>
Date: Thu, 28 May 2015 07:51:09 +0200
From: Heiko Schocher <hs@...x.de>
To: Heiko Schocher <hs@...x.de>
CC: linux-kernel@...r.kernel.org,
Thierry Reding <thierry.reding@...il.com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH] drm/panel: add lg4573 driver
Hello,
Am 06.05.2015 09:49, schrieb Heiko Schocher:
> The patch adds LG4573 parallel RGB panel driver with SPI control interface.
> The driver uses drm_panel framework.
>
> Signed-off-by: Heiko Schocher <hs@...x.de>
>
> ---
>
> .../devicetree/bindings/panel/lg,lg4573.txt | 42 +++
> drivers/gpu/drm/panel/Kconfig | 8 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-lg4573.c | 367 +++++++++++++++++++++
> 4 files changed, 418 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/panel/lg,lg4573.txt
> create mode 100644 drivers/gpu/drm/panel/panel-lg4573.c
ping...
bye,
Heiko
>
> diff --git a/Documentation/devicetree/bindings/panel/lg,lg4573.txt b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
> new file mode 100644
> index 0000000..55f495d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
> @@ -0,0 +1,42 @@
> +LG LG4573 TFT liquid crystal display with SPI control bus
> +
> +Required properties:
> + - compatible: "lg4573"
> + - reg: address of the panel on SPI bus
> + - display-timings: timings for the connected panel according to [1]
> +
> +The panel must obey rules for SPI slave device specified in document [2].
> +
> +Optional properties:
> + - power-on-delay: delay after turning regulators on [ms]
> +
> +[1]: Documentation/devicetree/bindings/video/display-timing.txt
> +[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Example:
> +
> + lcd_panel: display@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "lg,lg4573";
> + spi-max-frequency = <10000000>;
> + reset-gpios = <&gpio2 11 0>;
> + reg = <0>;
> + power-on-delay = <10>;
> + display-timings {
> + 480x800p57 {
> + native-mode;
> + clock-frequency = <27000027>;
> + hactive = <480>;
> + vactive = <800>;
> + hfront-porch = <10>;
> + hback-porch = <59>;
> + hsync-len = <10>;
> + vback-porch = <15>;
> + vfront-porch = <15>;
> + vsync-len = <15>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + };
> + };
> + };
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 6d64c7b..29c3407 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -23,6 +23,14 @@ config DRM_PANEL_LD9040
> depends on OF && SPI
> select VIDEOMODE_HELPERS
>
> +config DRM_PANEL_LG4573
> + tristate "LG4573 RGB/SPI panel"
> + depends on OF && SPI
> + select VIDEOMODE_HELPERS
> + help
> + Say Y here if you want to enable support for LG4573 RGB panel.
> + To compile this driver as a module, choose M here.
> +
> config DRM_PANEL_S6E8AA0
> tristate "S6E8AA0 DSI video mode panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 4b2a043..715b95d 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
> +obj-$(CONFIG_DRM_PANEL_LG4573) += panel-lg4573.o
> obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> diff --git a/drivers/gpu/drm/panel/panel-lg4573.c b/drivers/gpu/drm/panel/panel-lg4573.c
> new file mode 100644
> index 0000000..9d5e5a5
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-lg4573.c
> @@ -0,0 +1,367 @@
> +/*
> + *
> + * Copyright (C) 2015 Heiko Schocher <hs@...x.de>
> + *
> + * from:
> + * drivers/gpu/drm/panel/panel-ld9040.c
> + * ld9040 AMOLED LCD drm_panel driver.
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> + * Derived from drivers/video/backlight/ld9040.c
> + *
> + * Andrzej Hajda <a.hajda@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +struct lg4573 {
> + struct device *dev;
> + struct drm_panel panel;
> + u32 power_on_delay;
> + struct videomode vm;
> +};
> +
> +static inline struct lg4573 *panel_to_lg4573(struct drm_panel *panel)
> +{
> + return container_of(panel, struct lg4573, panel);
> +}
> +
> +static int lg4573_spi_write_u16(struct lg4573 *ctx, u16 data)
> +{
> + struct spi_device *spi = to_spi_device(ctx->dev);
> + struct spi_transfer xfer = {
> + .len = 2,
> + };
> + struct spi_message msg;
> + u16 temp = htons(data);
> +
> + dev_dbg(ctx->dev, "writing data: %x\n", data);
> + xfer.tx_buf = &temp;
> + spi_message_init(&msg);
> + spi_message_add_tail(&xfer, &msg);
> +
> + return spi_sync(spi, &msg);
> +}
> +
> +static void lg4573_spi_write_u16_array(struct lg4573 *ctx, u16 *buff, int size)
> +{
> + int idx;
> +
> + for (idx = 0; idx < size; idx++)
> + lg4573_spi_write_u16(ctx, buff[idx]);
> +}
> +
> +static void lg4573_display_on(struct lg4573 *ctx)
> +{
> + static u16 sleep_out = 0x7011;
> + static u16 display_on = 0x7029;
> +
> + lg4573_spi_write_u16(ctx, sleep_out);
> + msleep(ctx->power_on_delay);
> + lg4573_spi_write_u16(ctx, display_on);
> +}
> +
> +static int lg4573_display_off(struct lg4573 *ctx)
> +{
> + static u16 display_off = 0x7028;
> + static u16 sleep_in = 0x7010;
> +
> + lg4573_spi_write_u16(ctx, display_off);
> + msleep(ctx->power_on_delay);
> + lg4573_spi_write_u16(ctx, sleep_in);
> + return 0;
> +}
> +
> +static void lg4573_display_mode_settings(struct lg4573 *ctx)
> +{
> + static u16 display_mode_settings[] = {
> + 0x703A,
> + 0x7270,
> + 0x70B1,
> + 0x7208,
> + 0x723B,
> + 0x720F,
> + 0x70B2,
> + 0x7200,
> + 0x72C8,
> + 0x70B3,
> + 0x7200,
> + 0x70B4,
> + 0x7200,
> + 0x70B5,
> + 0x7242,
> + 0x7210,
> + 0x7210,
> + 0x7200,
> + 0x7220,
> + 0x70B6,
> + 0x720B,
> + 0x720F,
> + 0x723C,
> + 0x7213,
> + 0x7213,
> + 0x72E8,
> + 0x70B7,
> + 0x7246,
> + 0x7206,
> + 0x720C,
> + 0x7200,
> + 0x7200,
> + };
> +
> + dev_dbg(ctx->dev, "transfer display mode settings\n");
> + lg4573_spi_write_u16_array(ctx, display_mode_settings,
> + ARRAY_SIZE(display_mode_settings));
> +}
> +
> +static void lg4573_power_settings(struct lg4573 *ctx)
> +{
> + static u16 power_settings[] = {
> + 0x70C0,
> + 0x7201,
> + 0x7211,
> + 0x70C3,
> + 0x7207,
> + 0x7203,
> + 0x7204,
> + 0x7204,
> + 0x7204,
> + 0x70C4,
> + 0x7212,
> + 0x7224,
> + 0x7218,
> + 0x7218,
> + 0x7202,
> + 0x7249,
> + 0x70C5,
> + 0x726F,
> + 0x70C6,
> + 0x7241,
> + 0x7263,
> + };
> +
> + dev_dbg(ctx->dev, "transfer power settings\n");
> + lg4573_spi_write_u16_array(ctx, power_settings,
> + ARRAY_SIZE(power_settings));
> +}
> +
> +static void lg4573_gamma_settings(struct lg4573 *ctx)
> +{
> + static u16 gamma_settings[] = {
> + 0x70D0,
> + 0x7203,
> + 0x7207,
> + 0x7273,
> + 0x7235,
> + 0x7200,
> + 0x7201,
> + 0x7220,
> + 0x7200,
> + 0x7203,
> + 0x70D1,
> + 0x7203,
> + 0x7207,
> + 0x7273,
> + 0x7235,
> + 0x7200,
> + 0x7201,
> + 0x7220,
> + 0x7200,
> + 0x7203,
> + 0x70D2,
> + 0x7203,
> + 0x7207,
> + 0x7273,
> + 0x7235,
> + 0x7200,
> + 0x7201,
> + 0x7220,
> + 0x7200,
> + 0x7203,
> + 0x70D3,
> + 0x7203,
> + 0x7207,
> + 0x7273,
> + 0x7235,
> + 0x7200,
> + 0x7201,
> + 0x7220,
> + 0x7200,
> + 0x7203,
> + 0x70D4,
> + 0x7203,
> + 0x7207,
> + 0x7273,
> + 0x7235,
> + 0x7200,
> + 0x7201,
> + 0x7220,
> + 0x7200,
> + 0x7203,
> + 0x70D5,
> + 0x7203,
> + 0x7207,
> + 0x7273,
> + 0x7235,
> + 0x7200,
> + 0x7201,
> + 0x7220,
> + 0x7200,
> + 0x7203,
> + };
> +
> + dev_dbg(ctx->dev, "transfer gamma settings\n");
> + lg4573_spi_write_u16_array(ctx, gamma_settings,
> + ARRAY_SIZE(gamma_settings));
> +}
> +
> +static void lg4573_init(struct lg4573 *ctx)
> +{
> + dev_dbg(ctx->dev, "initializing LCD\n");
> +
> + lg4573_display_mode_settings(ctx);
> + lg4573_power_settings(ctx);
> + lg4573_gamma_settings(ctx);
> +}
> +
> +static int lg4573_power_on(struct lg4573 *ctx)
> +{
> + msleep(ctx->power_on_delay);
> + lg4573_display_on(ctx);
> + return 0;
> +}
> +
> +static int lg4573_disable(struct drm_panel *panel)
> +{
> + struct lg4573 *ctx = panel_to_lg4573(panel);
> +
> + return lg4573_display_off(ctx);
> +}
> +
> +static int lg4573_enable(struct drm_panel *panel)
> +{
> + struct lg4573 *ctx = panel_to_lg4573(panel);
> + int ret;
> +
> + lg4573_init(ctx);
> +
> + ret = lg4573_power_on(ctx);
> +
> + return ret;
> +}
> +
> +static int lg4573_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct lg4573 *ctx = panel_to_lg4573(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_create(connector->dev);
> + if (!mode) {
> + DRM_ERROR("failed to create a new display mode\n");
> + return 0;
> + }
> +
> + drm_display_mode_from_videomode(&ctx->vm, mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs lg4573_drm_funcs = {
> + .disable = lg4573_disable,
> + .enable = lg4573_enable,
> + .get_modes = lg4573_get_modes,
> +};
> +
> +static int lg4573_parse_dt(struct lg4573 *ctx)
> +{
> + struct device *dev = ctx->dev;
> + struct device_node *np = dev->of_node;
> + int ret;
> +
> + ret = of_get_videomode(np, &ctx->vm, 0);
> + if (ret < 0)
> + return ret;
> +
> + of_property_read_u32(np, "power-on-delay", &ctx->power_on_delay);
> +
> + return 0;
> +}
> +
> +static int lg4573_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct lg4573 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(struct lg4573), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, ctx);
> + ctx->dev = dev;
> +
> + ret = lg4573_parse_dt(ctx);
> + if (ret < 0)
> + return ret;
> +
> + spi->bits_per_word = 8;
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(dev, "spi setup failed.\n");
> + return ret;
> + }
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = dev;
> + ctx->panel.funcs = &lg4573_drm_funcs;
> +
> + return drm_panel_add(&ctx->panel);
> +}
> +
> +static int lg4573_remove(struct spi_device *spi)
> +{
> + struct lg4573 *ctx = spi_get_drvdata(spi);
> +
> + lg4573_display_off(ctx);
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id lg4573_of_match[] = {
> + { .compatible = "lg,lg4573" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lg4573_of_match);
> +
> +static struct spi_driver lg4573_driver = {
> + .probe = lg4573_probe,
> + .remove = lg4573_remove,
> + .driver = {
> + .name = "lg4573",
> + .owner = THIS_MODULE,
> + .of_match_table = lg4573_of_match,
> + },
> +};
> +module_spi_driver(lg4573_driver);
> +
> +MODULE_AUTHOR("Heiko Schocher <hs@...x.de>");
> +MODULE_DESCRIPTION("lg4573 LCD Driver");
> +MODULE_LICENSE("GPL v2");
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists