| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1432891828-4816-9-git-send-email-alex.bennee@linaro.org> Date: Fri, 29 May 2015 10:30:24 +0100 From: Alex Bennée <alex.bennee@...aro.org> To: kvm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, kvmarm@...ts.cs.columbia.edu, christoffer.dall@...aro.org, marc.zyngier@....com, peter.maydell@...aro.org, agraf@...e.de, drjones@...hat.com, pbonzini@...hat.com, zhichao.huang@...aro.org Cc: jan.kiszka@...mens.com, dahi@...ux.vnet.ibm.com, r65777@...escale.com, bp@...e.de, Alex Bennée <alex.bennee@...aro.org>, Gleb Natapov <gleb@...nel.org>, Catalin Marinas <catalin.marinas@....com>, Will Deacon <will.deacon@....com>, linux-kernel@...r.kernel.org (open list) Subject: [PATCH v5 08/12] KVM: arm64: re-factor hyp.S debug register code This is a pre-cursor to sharing the code with the guest debug support. This replaces the big macro that fishes data out of a fixed location with a more general helper macro to restore a set of debug registers. It uses macro substitution so it can be re-used for debug control and value registers. It does however rely on the debug registers being 64 bit aligned (as they happen to be in the hyp ABI). Signed-off-by: Alex Bennée <alex.bennee@...aro.org> --- v3: - return to the patch series - add save and restore targets - change register use and document v4: - keep original setup/restore names - don't use split u32/u64 structure yet --- arch/arm64/kvm/hyp.S | 519 ++++++++++++++------------------------------------- 1 file changed, 140 insertions(+), 379 deletions(-) diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S index 74e63d8..9c4897d 100644 --- a/arch/arm64/kvm/hyp.S +++ b/arch/arm64/kvm/hyp.S @@ -228,199 +228,52 @@ stp x24, x25, [x3, #160] .endm -.macro save_debug - // x2: base address for cpu context - // x3: tmp register - - mrs x26, id_aa64dfr0_el1 - ubfx x24, x26, #12, #4 // Extract BRPs - ubfx x25, x26, #20, #4 // Extract WRPs - mov w26, #15 - sub w24, w26, w24 // How many BPs to skip - sub w25, w26, w25 // How many WPs to skip - - add x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1) - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 -1: - mrs x20, dbgbcr15_el1 - mrs x19, dbgbcr14_el1 - mrs x18, dbgbcr13_el1 - mrs x17, dbgbcr12_el1 - mrs x16, dbgbcr11_el1 - mrs x15, dbgbcr10_el1 - mrs x14, dbgbcr9_el1 - mrs x13, dbgbcr8_el1 - mrs x12, dbgbcr7_el1 - mrs x11, dbgbcr6_el1 - mrs x10, dbgbcr5_el1 - mrs x9, dbgbcr4_el1 - mrs x8, dbgbcr3_el1 - mrs x7, dbgbcr2_el1 - mrs x6, dbgbcr1_el1 - mrs x5, dbgbcr0_el1 - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 - -1: - str x20, [x3, #(15 * 8)] - str x19, [x3, #(14 * 8)] - str x18, [x3, #(13 * 8)] - str x17, [x3, #(12 * 8)] - str x16, [x3, #(11 * 8)] - str x15, [x3, #(10 * 8)] - str x14, [x3, #(9 * 8)] - str x13, [x3, #(8 * 8)] - str x12, [x3, #(7 * 8)] - str x11, [x3, #(6 * 8)] - str x10, [x3, #(5 * 8)] - str x9, [x3, #(4 * 8)] - str x8, [x3, #(3 * 8)] - str x7, [x3, #(2 * 8)] - str x6, [x3, #(1 * 8)] - str x5, [x3, #(0 * 8)] - - add x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1) - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 -1: - mrs x20, dbgbvr15_el1 - mrs x19, dbgbvr14_el1 - mrs x18, dbgbvr13_el1 - mrs x17, dbgbvr12_el1 - mrs x16, dbgbvr11_el1 - mrs x15, dbgbvr10_el1 - mrs x14, dbgbvr9_el1 - mrs x13, dbgbvr8_el1 - mrs x12, dbgbvr7_el1 - mrs x11, dbgbvr6_el1 - mrs x10, dbgbvr5_el1 - mrs x9, dbgbvr4_el1 - mrs x8, dbgbvr3_el1 - mrs x7, dbgbvr2_el1 - mrs x6, dbgbvr1_el1 - mrs x5, dbgbvr0_el1 - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 - -1: - str x20, [x3, #(15 * 8)] - str x19, [x3, #(14 * 8)] - str x18, [x3, #(13 * 8)] - str x17, [x3, #(12 * 8)] - str x16, [x3, #(11 * 8)] - str x15, [x3, #(10 * 8)] - str x14, [x3, #(9 * 8)] - str x13, [x3, #(8 * 8)] - str x12, [x3, #(7 * 8)] - str x11, [x3, #(6 * 8)] - str x10, [x3, #(5 * 8)] - str x9, [x3, #(4 * 8)] - str x8, [x3, #(3 * 8)] - str x7, [x3, #(2 * 8)] - str x6, [x3, #(1 * 8)] - str x5, [x3, #(0 * 8)] - - add x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1) - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 +.macro save_debug type + // x4: pointer to register set + // x5: number of registers to skip + // x6..x22 trashed + + adr x22, 1f + add x22, x22, x5, lsl #2 + br x22 1: - mrs x20, dbgwcr15_el1 - mrs x19, dbgwcr14_el1 - mrs x18, dbgwcr13_el1 - mrs x17, dbgwcr12_el1 - mrs x16, dbgwcr11_el1 - mrs x15, dbgwcr10_el1 - mrs x14, dbgwcr9_el1 - mrs x13, dbgwcr8_el1 - mrs x12, dbgwcr7_el1 - mrs x11, dbgwcr6_el1 - mrs x10, dbgwcr5_el1 - mrs x9, dbgwcr4_el1 - mrs x8, dbgwcr3_el1 - mrs x7, dbgwcr2_el1 - mrs x6, dbgwcr1_el1 - mrs x5, dbgwcr0_el1 - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 - -1: - str x20, [x3, #(15 * 8)] - str x19, [x3, #(14 * 8)] - str x18, [x3, #(13 * 8)] - str x17, [x3, #(12 * 8)] - str x16, [x3, #(11 * 8)] - str x15, [x3, #(10 * 8)] - str x14, [x3, #(9 * 8)] - str x13, [x3, #(8 * 8)] - str x12, [x3, #(7 * 8)] - str x11, [x3, #(6 * 8)] - str x10, [x3, #(5 * 8)] - str x9, [x3, #(4 * 8)] - str x8, [x3, #(3 * 8)] - str x7, [x3, #(2 * 8)] - str x6, [x3, #(1 * 8)] - str x5, [x3, #(0 * 8)] - - add x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1) - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 + mrs x21, \type\()15_el1 + mrs x20, \type\()14_el1 + mrs x19, \type\()13_el1 + mrs x18, \type\()12_el1 + mrs x17, \type\()11_el1 + mrs x16, \type\()10_el1 + mrs x15, \type\()9_el1 + mrs x14, \type\()8_el1 + mrs x13, \type\()7_el1 + mrs x12, \type\()6_el1 + mrs x11, \type\()5_el1 + mrs x10, \type\()4_el1 + mrs x9, \type\()3_el1 + mrs x8, \type\()2_el1 + mrs x7, \type\()1_el1 + mrs x6, \type\()0_el1 + + adr x22, 1f + add x22, x22, x5, lsl #2 + br x22 1: - mrs x20, dbgwvr15_el1 - mrs x19, dbgwvr14_el1 - mrs x18, dbgwvr13_el1 - mrs x17, dbgwvr12_el1 - mrs x16, dbgwvr11_el1 - mrs x15, dbgwvr10_el1 - mrs x14, dbgwvr9_el1 - mrs x13, dbgwvr8_el1 - mrs x12, dbgwvr7_el1 - mrs x11, dbgwvr6_el1 - mrs x10, dbgwvr5_el1 - mrs x9, dbgwvr4_el1 - mrs x8, dbgwvr3_el1 - mrs x7, dbgwvr2_el1 - mrs x6, dbgwvr1_el1 - mrs x5, dbgwvr0_el1 - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 - -1: - str x20, [x3, #(15 * 8)] - str x19, [x3, #(14 * 8)] - str x18, [x3, #(13 * 8)] - str x17, [x3, #(12 * 8)] - str x16, [x3, #(11 * 8)] - str x15, [x3, #(10 * 8)] - str x14, [x3, #(9 * 8)] - str x13, [x3, #(8 * 8)] - str x12, [x3, #(7 * 8)] - str x11, [x3, #(6 * 8)] - str x10, [x3, #(5 * 8)] - str x9, [x3, #(4 * 8)] - str x8, [x3, #(3 * 8)] - str x7, [x3, #(2 * 8)] - str x6, [x3, #(1 * 8)] - str x5, [x3, #(0 * 8)] - - mrs x21, mdccint_el1 - str x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)] + str x21, [x4, #(15 * 8)] + str x20, [x4, #(14 * 8)] + str x19, [x4, #(13 * 8)] + str x18, [x4, #(12 * 8)] + str x17, [x4, #(11 * 8)] + str x16, [x4, #(10 * 8)] + str x15, [x4, #(9 * 8)] + str x14, [x4, #(8 * 8)] + str x13, [x4, #(7 * 8)] + str x12, [x4, #(6 * 8)] + str x11, [x4, #(5 * 8)] + str x10, [x4, #(4 * 8)] + str x9, [x4, #(3 * 8)] + str x8, [x4, #(2 * 8)] + str x7, [x4, #(1 * 8)] + str x6, [x4, #(0 * 8)] .endm .macro restore_sysregs @@ -465,195 +318,52 @@ msr mdscr_el1, x25 .endm -.macro restore_debug - // x2: base address for cpu context - // x3: tmp register - - mrs x26, id_aa64dfr0_el1 - ubfx x24, x26, #12, #4 // Extract BRPs - ubfx x25, x26, #20, #4 // Extract WRPs - mov w26, #15 - sub w24, w26, w24 // How many BPs to skip - sub w25, w26, w25 // How many WPs to skip - - add x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1) +.macro restore_debug type + // x4: pointer to register set + // x5: number of registers to skip + // x6..x22 trashed - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 + adr x22, 1f + add x22, x22, x5, lsl #2 + br x22 1: - ldr x20, [x3, #(15 * 8)] - ldr x19, [x3, #(14 * 8)] - ldr x18, [x3, #(13 * 8)] - ldr x17, [x3, #(12 * 8)] - ldr x16, [x3, #(11 * 8)] - ldr x15, [x3, #(10 * 8)] - ldr x14, [x3, #(9 * 8)] - ldr x13, [x3, #(8 * 8)] - ldr x12, [x3, #(7 * 8)] - ldr x11, [x3, #(6 * 8)] - ldr x10, [x3, #(5 * 8)] - ldr x9, [x3, #(4 * 8)] - ldr x8, [x3, #(3 * 8)] - ldr x7, [x3, #(2 * 8)] - ldr x6, [x3, #(1 * 8)] - ldr x5, [x3, #(0 * 8)] - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 + ldr x21, [x4, #(15 * 8)] + ldr x20, [x4, #(14 * 8)] + ldr x19, [x4, #(13 * 8)] + ldr x18, [x4, #(12 * 8)] + ldr x17, [x4, #(11 * 8)] + ldr x16, [x4, #(10 * 8)] + ldr x15, [x4, #(9 * 8)] + ldr x14, [x4, #(8 * 8)] + ldr x13, [x4, #(7 * 8)] + ldr x12, [x4, #(6 * 8)] + ldr x11, [x4, #(5 * 8)] + ldr x10, [x4, #(4 * 8)] + ldr x9, [x4, #(3 * 8)] + ldr x8, [x4, #(2 * 8)] + ldr x7, [x4, #(1 * 8)] + ldr x6, [x4, #(0 * 8)] + + adr x22, 1f + add x22, x22, x5, lsl #2 + br x22 1: - msr dbgbcr15_el1, x20 - msr dbgbcr14_el1, x19 - msr dbgbcr13_el1, x18 - msr dbgbcr12_el1, x17 - msr dbgbcr11_el1, x16 - msr dbgbcr10_el1, x15 - msr dbgbcr9_el1, x14 - msr dbgbcr8_el1, x13 - msr dbgbcr7_el1, x12 - msr dbgbcr6_el1, x11 - msr dbgbcr5_el1, x10 - msr dbgbcr4_el1, x9 - msr dbgbcr3_el1, x8 - msr dbgbcr2_el1, x7 - msr dbgbcr1_el1, x6 - msr dbgbcr0_el1, x5 - - add x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1) - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 -1: - ldr x20, [x3, #(15 * 8)] - ldr x19, [x3, #(14 * 8)] - ldr x18, [x3, #(13 * 8)] - ldr x17, [x3, #(12 * 8)] - ldr x16, [x3, #(11 * 8)] - ldr x15, [x3, #(10 * 8)] - ldr x14, [x3, #(9 * 8)] - ldr x13, [x3, #(8 * 8)] - ldr x12, [x3, #(7 * 8)] - ldr x11, [x3, #(6 * 8)] - ldr x10, [x3, #(5 * 8)] - ldr x9, [x3, #(4 * 8)] - ldr x8, [x3, #(3 * 8)] - ldr x7, [x3, #(2 * 8)] - ldr x6, [x3, #(1 * 8)] - ldr x5, [x3, #(0 * 8)] - - adr x26, 1f - add x26, x26, x24, lsl #2 - br x26 -1: - msr dbgbvr15_el1, x20 - msr dbgbvr14_el1, x19 - msr dbgbvr13_el1, x18 - msr dbgbvr12_el1, x17 - msr dbgbvr11_el1, x16 - msr dbgbvr10_el1, x15 - msr dbgbvr9_el1, x14 - msr dbgbvr8_el1, x13 - msr dbgbvr7_el1, x12 - msr dbgbvr6_el1, x11 - msr dbgbvr5_el1, x10 - msr dbgbvr4_el1, x9 - msr dbgbvr3_el1, x8 - msr dbgbvr2_el1, x7 - msr dbgbvr1_el1, x6 - msr dbgbvr0_el1, x5 - - add x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1) - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 -1: - ldr x20, [x3, #(15 * 8)] - ldr x19, [x3, #(14 * 8)] - ldr x18, [x3, #(13 * 8)] - ldr x17, [x3, #(12 * 8)] - ldr x16, [x3, #(11 * 8)] - ldr x15, [x3, #(10 * 8)] - ldr x14, [x3, #(9 * 8)] - ldr x13, [x3, #(8 * 8)] - ldr x12, [x3, #(7 * 8)] - ldr x11, [x3, #(6 * 8)] - ldr x10, [x3, #(5 * 8)] - ldr x9, [x3, #(4 * 8)] - ldr x8, [x3, #(3 * 8)] - ldr x7, [x3, #(2 * 8)] - ldr x6, [x3, #(1 * 8)] - ldr x5, [x3, #(0 * 8)] - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 -1: - msr dbgwcr15_el1, x20 - msr dbgwcr14_el1, x19 - msr dbgwcr13_el1, x18 - msr dbgwcr12_el1, x17 - msr dbgwcr11_el1, x16 - msr dbgwcr10_el1, x15 - msr dbgwcr9_el1, x14 - msr dbgwcr8_el1, x13 - msr dbgwcr7_el1, x12 - msr dbgwcr6_el1, x11 - msr dbgwcr5_el1, x10 - msr dbgwcr4_el1, x9 - msr dbgwcr3_el1, x8 - msr dbgwcr2_el1, x7 - msr dbgwcr1_el1, x6 - msr dbgwcr0_el1, x5 - - add x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1) - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 -1: - ldr x20, [x3, #(15 * 8)] - ldr x19, [x3, #(14 * 8)] - ldr x18, [x3, #(13 * 8)] - ldr x17, [x3, #(12 * 8)] - ldr x16, [x3, #(11 * 8)] - ldr x15, [x3, #(10 * 8)] - ldr x14, [x3, #(9 * 8)] - ldr x13, [x3, #(8 * 8)] - ldr x12, [x3, #(7 * 8)] - ldr x11, [x3, #(6 * 8)] - ldr x10, [x3, #(5 * 8)] - ldr x9, [x3, #(4 * 8)] - ldr x8, [x3, #(3 * 8)] - ldr x7, [x3, #(2 * 8)] - ldr x6, [x3, #(1 * 8)] - ldr x5, [x3, #(0 * 8)] - - adr x26, 1f - add x26, x26, x25, lsl #2 - br x26 -1: - msr dbgwvr15_el1, x20 - msr dbgwvr14_el1, x19 - msr dbgwvr13_el1, x18 - msr dbgwvr12_el1, x17 - msr dbgwvr11_el1, x16 - msr dbgwvr10_el1, x15 - msr dbgwvr9_el1, x14 - msr dbgwvr8_el1, x13 - msr dbgwvr7_el1, x12 - msr dbgwvr6_el1, x11 - msr dbgwvr5_el1, x10 - msr dbgwvr4_el1, x9 - msr dbgwvr3_el1, x8 - msr dbgwvr2_el1, x7 - msr dbgwvr1_el1, x6 - msr dbgwvr0_el1, x5 - - ldr x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)] - msr mdccint_el1, x21 + msr \type\()15_el1, x21 + msr \type\()14_el1, x20 + msr \type\()13_el1, x19 + msr \type\()12_el1, x18 + msr \type\()11_el1, x17 + msr \type\()10_el1, x16 + msr \type\()9_el1, x15 + msr \type\()8_el1, x14 + msr \type\()7_el1, x13 + msr \type\()6_el1, x12 + msr \type\()5_el1, x11 + msr \type\()4_el1, x10 + msr \type\()3_el1, x9 + msr \type\()2_el1, x8 + msr \type\()1_el1, x7 + msr \type\()0_el1, x6 .endm .macro skip_32bit_state tmp, target @@ -887,12 +597,63 @@ __restore_sysregs: restore_sysregs ret +/* Save debug state */ __save_debug: - save_debug + // x0: base address for vcpu context + // x2: ptr to current CPU context + // x4/x5: trashed + + mrs x26, id_aa64dfr0_el1 + ubfx x24, x26, #12, #4 // Extract BRPs + ubfx x25, x26, #20, #4 // Extract WRPs + mov w26, #15 + sub w24, w26, w24 // How many BPs to skip + sub w25, w26, w25 // How many WPs to skip + + mov x5, x24 + add x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1) + save_debug dbgbcr + add x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1) + save_debug dbgbvr + + mov x5, x25 + add x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1) + save_debug dbgwcr + add x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1) + save_debug dbgwvr + + mrs x21, mdccint_el1 + str x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)] ret +/* Restore debug state */ __restore_debug: - restore_debug + // x0: base address for cpu context + // x2: ptr to current CPU context + // x4/x5: trashed + + mrs x26, id_aa64dfr0_el1 + ubfx x24, x26, #12, #4 // Extract BRPs + ubfx x25, x26, #20, #4 // Extract WRPs + mov w26, #15 + sub w24, w26, w24 // How many BPs to skip + sub w25, w26, w25 // How many WPs to skip + + mov x5, x24 + add x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1) + restore_debug dbgbcr + add x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1) + restore_debug dbgbvr + + mov x5, x25 + add x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1) + restore_debug dbgwcr + add x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1) + restore_debug dbgwvr + + ldr x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)] + msr mdccint_el1, x21 + ret __save_fpsimd: -- 2.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists