lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1432909545-31895-1-git-send-email-anda-maria.nicolae@intel.com>
Date:	Fri, 29 May 2015 17:25:42 +0300
From:	Anda-Maria Nicolae <anda-maria.nicolae@...el.com>
To:	sre@...nel.org, dbaryshkov@...il.com, robh+dt@...nel.org,
	pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	dwmw2@...radead.org, linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH v7 0/3] Add support for Richtek RT9455 battery charger

The next 3 patches do the following:
- first patch adds Richtek Technology Corporation in the vendor-prefixes list
- second patch adds device tree binding example for Richtek RT9455 battery charger
- third patch adds the driver for Richtek RT9455 battery charger

The reason why v6 did not contain any modification except for patch splitting, is that
I did not scroll down the e-mail and I thought the patch splitting was the only modification
I need to do. My bad.

Updates from v6:
- added interrupt-parent and interrupts as required properties in DT file rt9455_charger.txt.
- removed interrupt-gpio and reset-gpio from DT file rt9455_charger.txt.
- used IRQ_TYPE_LEVEL_LOW (for this charger, it works the same with IRQ_TYPE_EDGE_RISING and
  with IRQ_TYPE_LEVEL_LOW, but I prefer IRQ_TYPE_LEVEL_LOW) in interrupt specification, 
  in DT file rt9455_charger.txt.
- removed gpiod_irq and gpio_irq from rt9455_info structure.
- set boost voltage value without previously reading the existing value in the register.
- set voreg value without previously reading the existing value in the register.
- removed rt9455_setup_irq function. client->irq is set even without calling of_irq_get().
- used devm_power_supply_register() and removed power_supply_unregister() from rt9455_remove().

Anda-Maria Nicolae (3):
  of: Add vendor prefix for Richtek Technology Corporation
  Documentation: devicetree: Add Richtek RT9455 bindings
  power_supply: Add support for Richtek RT9455 battery charger

 .../devicetree/bindings/power/rt9455_charger.txt   |   46 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/power/Kconfig                              |    7 +
 drivers/power/Makefile                             |    1 +
 drivers/power/rt9455_charger.c                     | 1751 ++++++++++++++++++++
 5 files changed, 1806 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/rt9455_charger.txt
 create mode 100644 drivers/power/rt9455_charger.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ