linux-kernel - [PATCH v3 6/6] usb: chipidea: add work-around for Marvell HSIC PHY startup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1432917526-9688-7-git-send-email-robh@kernel.org>
Date:	Fri, 29 May 2015 11:38:46 -0500
From:	Rob Herring <robh@...nel.org>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Peter Chen <peter.chen@...escale.com>,
	Kishon Vijay Abraham I <kishon@...com>
Cc:	linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
	Rob Herring <robh@...nel.org>
Subject: [PATCH v3 6/6] usb: chipidea: add work-around for Marvell HSIC PHY startup

The Marvell 28nm HSIC PHY requires the port to be forced to HS mode after
the port power is applied. This is done using the test mode in the PORTSC
register.

As HSIC is always HS, this work-around should be safe to do with all HSIC
PHYs and has been tested on i.MX6S.

Signed-off-by: Rob Herring <robh@...nel.org>
Tested-by: Peter Chen <Peter.Chen@...escale.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org
---
 drivers/usb/chipidea/host.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 21fe1a3..6cf87b8 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -37,12 +37,14 @@ static int (*orig_bus_suspend)(struct usb_hcd *hcd);
 
 struct ehci_ci_priv {
 	struct regulator *reg_vbus;
+	struct ci_hdrc *ci;
 };
 
 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
+	struct ci_hdrc *ci = priv->ci;
 	struct device *dev = hcd->self.controller;
 	int ret = 0;
 	int port = HCS_N_PORTS(ehci->hcs_params);
@@ -64,6 +66,15 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
 			return ret;
 		}
 	}
+
+	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
+		/*
+		 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
+		 * As HSIC is always HS, this should be safe for others.
+		 */
+		hw_port_test_set(ci, 5);
+		hw_port_test_set(ci, 0);
+	}
 	return 0;
 };
 
@@ -112,6 +123,7 @@ static int host_start(struct ci_hdrc *ci)
 
 	priv = (struct ehci_ci_priv *)ehci->priv;
 	priv->reg_vbus = NULL;
+	priv->ci = ci;
 
 	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
 		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/