[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <55692C36.1000309@huawei.com>
Date: Sat, 30 May 2015 11:19:18 +0800
From: "majun (F)" <majun258@...wei.com>
To: catalin Marinas <Catalin.Marinas@....com>,
LKML <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Will Deacon <Will.Deacon@....com>,
Mark Rutland <mark.rutland@....com>,
Marc Zyngier <marc.zyngier@....com>
Subject: [PATCH 4/4]:dt-binding:Documents the mbigen bindings
Add the mbigen msi interrupt controller bindings document
Signed-off-by: Ma Jun <majun258@...wei.com>
---
Documentation/devicetree/bindings/arm/mbigen.txt | 51 ++++++++++++++++++++++
1 files changed, 51 insertions(+), 0 deletions(-)
create mode 100755 Documentation/devicetree/bindings/arm/mbigen.txt
diff --git a/Documentation/devicetree/bindings/arm/mbigen.txt b/Documentation/devicetree/bindings/arm/mbigen.txt
new file mode 100755
index 0000000..d442b31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mbigen.txt
@@ -0,0 +1,51 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and gnerate the inteerrupt
+by wirtting ITS register.
+
+The mbigen and devices connect to mbigen have the following properties:
+
+
+Mbigen required properties:
+-------------------------------------------
+-compatible: Should be "hisilicon,mbi-gen"
+-msi-parent: should specified the ITS mbigen connected
+-interrupt controller: Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value is 2 for now.
+- reg: Specifies the base physical address and size of the ITS
+ registers.
+
+Examples:
+
+ mbigen_pa: interrupt-controller@...30000 {
+ compatible = "hisilicon,mbi-gen";
+ msi-parent = <&its_pa>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4c030000 0x10000>;
+ };
+
+Device connect to mbigen required properties:
+----------------------------------------------------
+-interrupt-parent: Specifies the mbigen node which device connected.
+-interrupts:specifies the interrupt source.The first cell is hwirq num, the
+ second number is trigger type.
+
+Examples:
+ usb0: ehci@...00000 {
+ compatible = "generic-ehci";
+ interrupt-parent = <&mbigen_pa>;
+ reg = <0xa1000000 0x10000>;
+ interrupts = <20 4>;
+ };
+
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists