| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150601091552.GA1641@arm.com>
Date: Mon, 1 Jun 2015 10:15:52 +0100
From: Will Deacon <will.deacon@....com>
To: Alex Bennée <alex.bennee@...aro.org>
Cc: "kvm@...r.kernel.org" <kvm@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"kvmarm@...ts.cs.columbia.edu" <kvmarm@...ts.cs.columbia.edu>,
"christoffer.dall@...aro.org" <christoffer.dall@...aro.org>,
Marc Zyngier <Marc.Zyngier@....com>,
"peter.maydell@...aro.org" <peter.maydell@...aro.org>,
"agraf@...e.de" <agraf@...e.de>,
"drjones@...hat.com" <drjones@...hat.com>,
"pbonzini@...hat.com" <pbonzini@...hat.com>,
"zhichao.huang@...aro.org" <zhichao.huang@...aro.org>,
"jan.kiszka@...mens.com" <jan.kiszka@...mens.com>,
"dahi@...ux.vnet.ibm.com" <dahi@...ux.vnet.ibm.com>,
"r65777@...escale.com" <r65777@...escale.com>,
"bp@...e.de" <bp@...e.de>, Gleb Natapov <gleb@...nel.org>,
Jonathan Corbet <corbet@....net>,
Russell King <linux@....linux.org.uk>,
Catalin Marinas <Catalin.Marinas@....com>,
Ingo Molnar <mingo@...nel.org>,
Peter Zijlstra <peterz@...radead.org>,
Lorenzo Pieralisi <Lorenzo.Pieralisi@....com>,
"open list:DOCUMENTATION" <linux-doc@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:ABI/API" <linux-api@...r.kernel.org>
Subject: Re: [PATCH v5 10/12] KVM: arm64: guest debug, HW assisted debug
support
Hi Alex,
On Fri, May 29, 2015 at 10:30:26AM +0100, Alex Bennée wrote:
> This adds support for userspace to control the HW debug registers for
> guest debug. In the debug ioctl we copy the IMPDEF defined number of
> registers into a new register set called host_debug_state. There is now
> a new vcpu parameter called debug_ptr which selects which register set
> is to copied into the real registers when world switch occurs.
>
> I've moved some helper functions into the hw_breakpoint.h header for
> re-use.
>
> As with single step we need to tweak the guest registers to enable the
> exceptions so we need to save and restore those bits.
>
> Two new capabilities have been added to the KVM_EXTENSION ioctl to allow
> userspace to query the number of hardware break and watch points
> available on the host hardware.
>
> Signed-off-by: Alex Bennée <alex.bennee@...aro.org>
[...]
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 33c8143..ada57df 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2668,7 +2668,7 @@ The top 16 bits of the control field are architecture specific control
> flags which can include the following:
>
> - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64]
> - - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
> + - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390, arm64]
> - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
> - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
> - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390]
> @@ -2683,6 +2683,11 @@ updated to the correct (supplied) values.
> The second part of the structure is architecture specific and
> typically contains a set of debug registers.
>
> +For arm64 the number of debug registers is implementation defined and
> +can be determined by querying the KVM_CAP_GUEST_DEBUG_HW_BPS and
> +KVM_CAP_GUEST_DEBUG_HW_WPS capabilities which return a positive number
> +indicating the number of supported registers.
> +
> When debug events exit the main run loop with the reason
> KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
> structure containing architecture specific debug information.
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 0d17c7b..6df47c1 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -307,6 +307,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
>
> #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
> KVM_GUESTDBG_USE_SW_BP | \
> + KVM_GUESTDBG_USE_HW_BP | \
> KVM_GUESTDBG_SINGLESTEP)
>
> /**
> @@ -327,6 +328,12 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
>
> if (dbg->control & KVM_GUESTDBG_ENABLE) {
> vcpu->guest_debug = dbg->control;
> +
> + /* Hardware assisted Break and Watch points */
> + if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
> + vcpu->arch.external_debug_state = dbg->arch;
> + }
> +
> } else {
> /* If not enabled clear all flags */
> vcpu->guest_debug = 0;
> diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
> index 52b484b..c450552 100644
> --- a/arch/arm64/include/asm/hw_breakpoint.h
> +++ b/arch/arm64/include/asm/hw_breakpoint.h
> @@ -130,6 +130,18 @@ static inline void ptrace_hw_copy_thread(struct task_struct *task)
> }
> #endif
>
> +/* Determine number of BRP registers available. */
> +static inline int get_num_brps(void)
> +{
> + return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
> +}
> +
> +/* Determine number of WRP registers available. */
> +static inline int get_num_wrps(void)
> +{
> + return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
> +}
I'm fine with moving these into the header file, but we should probably
revisit this at some point so that we use a shadow value to indicate the
minimum number of registers across the system for e.g. big.LITTLE platforms
that don't have uniform debug resources.
> extern struct pmu perf_ops_bp;
>
> #endif /* __KERNEL__ */
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index e5040b6..498d4f7 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -113,12 +113,13 @@ struct kvm_vcpu_arch {
>
> /*
> * For debugging the guest we need to keep a set of debug
> - * registers which can override the guests own debug state
> + * registers which can override the guest's own debug state
> * while being used. These are set via the KVM_SET_GUEST_DEBUG
> * ioctl.
> */
> struct kvm_guest_debug_arch *debug_ptr;
> struct kvm_guest_debug_arch vcpu_debug_state;
> + struct kvm_guest_debug_arch external_debug_state;
>
> /* Pointer to host CPU context */
> kvm_cpu_context_t *host_cpu_context;
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 43758e7..95168c2 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -116,7 +116,7 @@ struct kvm_guest_debug_arch {
>
> struct kvm_debug_exit_arch {
> __u32 hsr;
> - __u64 far;
> + __u64 far; /* used for watchpoints */
Why not just add the comment with the field in your earlier patch?
Will
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists