| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1433185605-2492600-13-git-send-email-arnd@arndb.de>
Date: Mon, 1 Jun 2015 21:06:45 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Greg KH <gregkh@...uxfoundation.org>
Cc: Rachel Kim <rachel.kim@...el.com>, Dean Lee <dean.lee@...el.com>,
Chris Park <chris.park@...el.com>, devel@...verdev.osuosl.org,
nicolas.ferre@...el.com, Johnny Kim <johnny.kim@...el.com>,
linux-kernel@...r.kernel.org,
Sudip Mukherjee <sudipm.mukherjee@...il.com>,
Arnd Bergmann <arnd@...db.de>
Subject: [PATCH v2 12/12] staging: wilc1000: fix compiler warnings
This avoids the remaining warnings that one gets on a normal
build: unused variables, unused labels, and invalid printk
format strings.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/staging/wilc1000/linux_wlan.c | 8 ++++++--
drivers/staging/wilc1000/linux_wlan_spi.c | 3 ---
drivers/staging/wilc1000/wilc_spi.c | 4 ++--
drivers/staging/wilc1000/wilc_wlan.c | 6 ++----
4 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index 2a74441af09e..46c7e4f3471d 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -1025,7 +1025,6 @@ int repeat_power_cycle(perInterface_wlan_t *nic);
static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
{
- static int timeout = 5;
int ret = 0;
/* start firmware */
PRINT_D(INIT_DBG, "Starting Firmware ...\n");
@@ -1040,6 +1039,7 @@ static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
ret = linux_wlan_lock_timeout(&g_linux_wlan->sync_event, 5000);
if (ret) {
#ifdef COMPLEMENT_BOOT
+ static int timeout = 5;
if (timeout--) {
PRINT_D(INIT_DBG, "repeat power cycle[%d]", timeout);
@@ -1675,7 +1675,9 @@ _fail_2:
linux_wlan_unlock(&g_linux_wlan->rxq_event);
kthread_stop(g_linux_wlan->rxq_thread);
+#ifndef TCP_ENHANCEMENTS
_fail_1:
+#endif
#if (RX_BH_TYPE == RX_BH_KTHREAD)
/*De-Initialize 1st thread*/
g_linux_wlan->close = 1;
@@ -1999,8 +2001,8 @@ _fail_fw_start_:
_fail_irq_enable_:
#if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
disable_sdio_interrupt();
-#endif
_fail_irq_init_:
+#endif
#if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
deinit_irq(g_linux_wlan);
@@ -2522,8 +2524,10 @@ void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset)
int stats;
unsigned char *buff_to_send = NULL;
struct sk_buff *skb;
+#ifndef TCP_ENHANCEMENTS
char *pu8UdpBuffer;
struct iphdr *ih;
+#endif
struct net_device *wilc_netdev;
perInterface_wlan_t *nic;
diff --git a/drivers/staging/wilc1000/linux_wlan_spi.c b/drivers/staging/wilc1000/linux_wlan_spi.c
index 0c30bbb5fa65..e5d794590f00 100644
--- a/drivers/staging/wilc1000/linux_wlan_spi.c
+++ b/drivers/staging/wilc1000/linux_wlan_spi.c
@@ -102,9 +102,6 @@ int linux_spi_init(void *vp)
if (called == 0) {
called++;
- if (&wilc_bus == NULL) {
- PRINT_ER("wilc_bus address is NULL\n");
- }
ret = spi_register_driver(&wilc_bus);
}
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index 2f38ddabc654..d0e761080ca5 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -1194,10 +1194,10 @@ static int spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
/* Read failed. Try with CRC off. This might happen when module
* is removed but chip isn't reset*/
g_spi.crc_off = 1;
- PRINT_ER("[wilc spi]: Failed internal read protocol with CRC on, retyring with CRC off...\n", __LINE__);
+ PRINT_ER("[wilc spi]: Failed internal read protocol with CRC on, retyring with CRC off...\n");
if (!spi_internal_read(WILC_SPI_PROTOCOL_OFFSET, ®)) {
/* Reaad failed with both CRC on and off, something went bad */
- PRINT_ER("[wilc spi]: Failed internal read protocol...\n", __LINE__);
+ PRINT_ER("[wilc spi]: Failed internal read protocol...\n");
return 0;
}
}
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index 92ed42ad49ac..badc8743dd1a 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -894,8 +894,6 @@ INLINE void chip_wakeup(void)
#endif
void chip_sleep_manually(WILC_Uint32 u32SleepTime)
{
- uint32_t val32;
-
if (genuChipPSstate != CHIP_WAKEDUP) {
/* chip is already sleeping. Do nothing */
return;
@@ -2302,7 +2300,7 @@ int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup)
#else
g_wlan.tx_buffer = (uint8_t *)g_wlan.os_func.os_malloc(g_wlan.tx_buffer_size);
#endif
- PRINT_D(TX_DBG, "g_wlan.tx_buffer = 0x%x\n", g_wlan.tx_buffer);
+ PRINT_D(TX_DBG, "g_wlan.tx_buffer = %p\n", g_wlan.tx_buffer);
if (g_wlan.tx_buffer == WILC_NULL) {
/* ENOBUFS 105 */
@@ -2319,7 +2317,7 @@ int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup)
#else
g_wlan.rx_buffer = (uint8_t *)g_wlan.os_func.os_malloc(g_wlan.rx_buffer_size);
#endif
- PRINT_D(TX_DBG, "g_wlan.rx_buffer =0x%x\n", g_wlan.rx_buffer);
+ PRINT_D(TX_DBG, "g_wlan.rx_buffer =%p\n", g_wlan.rx_buffer);
if (g_wlan.rx_buffer == WILC_NULL) {
/* ENOBUFS 105 */
ret = -105;
--
2.1.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists