| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 2 Jun 2015 16:16:08 -0400
From: Paul Gortmaker <paul.gortmaker@...driver.com>
To: <linux-kernel@...r.kernel.org>
CC: Paul Gortmaker <paul.gortmaker@...driver.com>,
Rusty Russell <rusty@...tcorp.com.au>
Subject: [PATCH 4/4] module: relocate module_init from init.h to module.h
Modular users will always be users of init functionality, but
users of init functionality are not necessarily always modules.
Hence any functionality like module_init and module_exit would
be more at home in the module.h file. And module.h should
explicitly include init.h to make the dependency clear.
We've already done all the legwork needed to ensure that this
move does not cause any build regressions due to implicit
header file include assumptions about where module_init lives.
Cc: Rusty Russell <rusty@...tcorp.com.au>
Acked-by: Rusty Russell <rusty@...tcorp.com.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@...driver.com>
---
[patch is essentially unchanged from the orignal Rusty acked here:
https://lkml.kernel.org/r/87ha8w50s9.fsf@rustcorp.com.au
...and yes we still have the lingering semicolon issue mentioned
there, it needs a treewide sweep before the header can be fixed.]
include/linux/init.h | 78 ----------------------------------------------
include/linux/module.h | 84 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 84 insertions(+), 78 deletions(-)
diff --git a/include/linux/init.h b/include/linux/init.h
index 21b6d768edd7..4e44857d8da4 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -293,68 +293,8 @@ void __init parse_early_param(void);
void __init parse_early_options(char *cmdline);
#endif /* __ASSEMBLY__ */
-/**
- * module_init() - driver initialization entry point
- * @x: function to be run at kernel boot time or module insertion
- *
- * module_init() will either be called during do_initcalls() (if
- * builtin) or at module insertion time (if a module). There can only
- * be one per module.
- */
-#define module_init(x) __initcall(x);
-
-/**
- * module_exit() - driver exit entry point
- * @x: function to be run when driver is removed
- *
- * module_exit() will wrap the driver clean-up code
- * with cleanup_module() when used with rmmod when
- * the driver is a module. If the driver is statically
- * compiled into the kernel, module_exit() has no effect.
- * There can only be one per module.
- */
-#define module_exit(x) __exitcall(x);
-
#else /* MODULE */
-/*
- * In most cases loadable modules do not need custom
- * initcall levels. There are still some valid cases where
- * a driver may be needed early if built in, and does not
- * matter when built as a loadable module. Like bus
- * snooping debug drivers.
- */
-#define early_initcall(fn) module_init(fn)
-#define core_initcall(fn) module_init(fn)
-#define core_initcall_sync(fn) module_init(fn)
-#define postcore_initcall(fn) module_init(fn)
-#define postcore_initcall_sync(fn) module_init(fn)
-#define arch_initcall(fn) module_init(fn)
-#define subsys_initcall(fn) module_init(fn)
-#define subsys_initcall_sync(fn) module_init(fn)
-#define fs_initcall(fn) module_init(fn)
-#define fs_initcall_sync(fn) module_init(fn)
-#define rootfs_initcall(fn) module_init(fn)
-#define device_initcall(fn) module_init(fn)
-#define device_initcall_sync(fn) module_init(fn)
-#define late_initcall(fn) module_init(fn)
-#define late_initcall_sync(fn) module_init(fn)
-
-#define console_initcall(fn) module_init(fn)
-#define security_initcall(fn) module_init(fn)
-
-/* Each module must use one module_init(). */
-#define module_init(initfn) \
- static inline initcall_t __inittest(void) \
- { return initfn; } \
- int init_module(void) __attribute__((alias(#initfn)));
-
-/* This is only required if you want to be unloadable. */
-#define module_exit(exitfn) \
- static inline exitcall_t __exittest(void) \
- { return exitfn; } \
- void cleanup_module(void) __attribute__((alias(#exitfn)));
-
#define __setup_param(str, unique_id, fn) /* nothing */
#define __setup(str, func) /* nothing */
#endif
@@ -362,24 +302,6 @@ void __init parse_early_options(char *cmdline);
/* Data marked not to be saved by software suspend */
#define __nosavedata __section(.data..nosave)
-/* This means "can be init if no module support, otherwise module load
- may call it." */
-#ifdef CONFIG_MODULES
-#define __init_or_module
-#define __initdata_or_module
-#define __initconst_or_module
-#define __INIT_OR_MODULE .text
-#define __INITDATA_OR_MODULE .data
-#define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits
-#else
-#define __init_or_module __init
-#define __initdata_or_module __initdata
-#define __initconst_or_module __initconst
-#define __INIT_OR_MODULE __INIT
-#define __INITDATA_OR_MODULE __INITDATA
-#define __INITRODATA_OR_MODULE __INITRODATA
-#endif /*CONFIG_MODULES*/
-
#ifdef MODULE
#define __exit_p(x) x
#else
diff --git a/include/linux/module.h b/include/linux/module.h
index c883b86ea964..64779468f8e8 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -11,6 +11,7 @@
#include <linux/compiler.h>
#include <linux/cache.h>
#include <linux/kmod.h>
+#include <linux/init.h>
#include <linux/elf.h>
#include <linux/stringify.h>
#include <linux/kobject.h>
@@ -70,6 +71,89 @@ extern struct module_attribute module_uevent;
extern int init_module(void);
extern void cleanup_module(void);
+#ifndef MODULE
+/**
+ * module_init() - driver initialization entry point
+ * @x: function to be run at kernel boot time or module insertion
+ *
+ * module_init() will either be called during do_initcalls() (if
+ * builtin) or at module insertion time (if a module). There can only
+ * be one per module.
+ */
+#define module_init(x) __initcall(x);
+
+/**
+ * module_exit() - driver exit entry point
+ * @x: function to be run when driver is removed
+ *
+ * module_exit() will wrap the driver clean-up code
+ * with cleanup_module() when used with rmmod when
+ * the driver is a module. If the driver is statically
+ * compiled into the kernel, module_exit() has no effect.
+ * There can only be one per module.
+ */
+#define module_exit(x) __exitcall(x);
+
+#else /* MODULE */
+
+/*
+ * In most cases loadable modules do not need custom
+ * initcall levels. There are still some valid cases where
+ * a driver may be needed early if built in, and does not
+ * matter when built as a loadable module. Like bus
+ * snooping debug drivers.
+ */
+#define early_initcall(fn) module_init(fn)
+#define core_initcall(fn) module_init(fn)
+#define core_initcall_sync(fn) module_init(fn)
+#define postcore_initcall(fn) module_init(fn)
+#define postcore_initcall_sync(fn) module_init(fn)
+#define arch_initcall(fn) module_init(fn)
+#define subsys_initcall(fn) module_init(fn)
+#define subsys_initcall_sync(fn) module_init(fn)
+#define fs_initcall(fn) module_init(fn)
+#define fs_initcall_sync(fn) module_init(fn)
+#define rootfs_initcall(fn) module_init(fn)
+#define device_initcall(fn) module_init(fn)
+#define device_initcall_sync(fn) module_init(fn)
+#define late_initcall(fn) module_init(fn)
+#define late_initcall_sync(fn) module_init(fn)
+
+#define console_initcall(fn) module_init(fn)
+#define security_initcall(fn) module_init(fn)
+
+/* Each module must use one module_init(). */
+#define module_init(initfn) \
+ static inline initcall_t __inittest(void) \
+ { return initfn; } \
+ int init_module(void) __attribute__((alias(#initfn)));
+
+/* This is only required if you want to be unloadable. */
+#define module_exit(exitfn) \
+ static inline exitcall_t __exittest(void) \
+ { return exitfn; } \
+ void cleanup_module(void) __attribute__((alias(#exitfn)));
+
+#endif
+
+/* This means "can be init if no module support, otherwise module load
+ may call it." */
+#ifdef CONFIG_MODULES
+#define __init_or_module
+#define __initdata_or_module
+#define __initconst_or_module
+#define __INIT_OR_MODULE .text
+#define __INITDATA_OR_MODULE .data
+#define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits
+#else
+#define __init_or_module __init
+#define __initdata_or_module __initdata
+#define __initconst_or_module __initconst
+#define __INIT_OR_MODULE __INIT
+#define __INITDATA_OR_MODULE __INITDATA
+#define __INITRODATA_OR_MODULE __INITRODATA
+#endif /*CONFIG_MODULES*/
+
/* Archs provide a method of finding the correct exception table. */
struct exception_table_entry;
--
2.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists