[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1433409546-23995-5-git-send-email-ivan.ivanov@linaro.org>
Date: Thu, 4 Jun 2015 12:19:03 +0300
From: "Ivan T. Ivanov" <ivan.ivanov@...aro.org>
To: Kumar Gala <galak@...eaurora.org>,
Andy Gross <agross@...eaurora.org>
Cc: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Stanimir Varbanov <stanimir.varbanov@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Olof Johansson <olof@...om.net>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org
Subject: [PATCH 4/7] arm64: dts: qcom: Add msm8916 USB configuration nodes
Add Host, Device and OTG configuration nodes.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 39 +++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9ff0eb4..5911de0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -268,6 +268,45 @@
status = "disabled";
};
+ usb_dev: usb@...9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x78d9000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_host: ehci@...9000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_otg: phy@...9000 {
+ compatible = "qcom,usb-otg-snps";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,vdd-levels = <1 5 7>;
+ qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+ dr_mode = "peripheral";
+ qcom,otg-control = <2>; // PMIC
+
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "iface", "core", "sleep";
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>,
+ <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+ status = "disabled";
+ };
+
intc: interrupt-controller@...0000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists