lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150605160017.GA8863@xsjsorenbubuntu>
Date:	Fri, 5 Jun 2015 09:00:17 -0700
From:	Sören Brinkmann <soren.brinkmann@...inx.com>
To:	Ranjit Waghmode <ranjit.waghmode@...inx.com>
CC:	<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
	<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
	<michal.simek@...inx.com>, <broonie@...nel.org>,
	<devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <linux-spi@...r.kernel.org>,
	<harinik@...inx.com>, <punnaia@...inx.com>, <ran27jit@...il.com>
Subject: Re: [LINUX RFC V2 1/2] devicetree: Add DT bindings documentation for
 Zynq Ultrascale+ MPSoC GQSPI controller

On Fri, 2015-06-05 at 06:37PM +0530, Ranjit Waghmode wrote:
> Add bindings documentation for GQSPI controller driver used by
> Zynq Ultrascale+ MPSoC
> 
> Signed-off-by: Ranjit Waghmode <ranjit.waghmode@...inx.com>
> ---
> No changes in v2
> ---
>  .../devicetree/bindings/spi/spi-zynqmp-qspi.txt    | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
> new file mode 100644
> index 0000000..cec6330
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
> @@ -0,0 +1,26 @@
> +Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
> +-------------------------------------------------------------------
> +
> +Required properties:
> +- compatible		: Should be "xlnx,zynqmp-qspi-1.0".
> +- reg			: Physical base address and size of GQSPI registers map.
> +- interrupts		: Property with a value describing the interrupt
> +			  number.
> +- interrupt-parent	: Must be core interrupt controller.
> +- clock-names		: List of input clock names - "ref_clk", "pclk"
> +			  (See clock bindings for details).
> +- clocks		: Clock phandles (see clock bindings for details).
> +
> +Optional properties:
> +- num-cs		: Number of chip selects used.
> +
> +Example:
> +	qspi: spi@...f0000 {
> +		compatible = "xlnx,zynqmp-qspi-1.0";
> +		clock-names = "ref_clk", "pclk";
> +		clocks = <&misc_clk &misc_clk>;
> +		interrupts = <0 15 4>;
> +		interrupt-parent = <&gic>;
> +		num-cs = <1>;
> +		reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;

Please make this
  reg = <0x0 0xff0f0000 0x1000>, <0x0 0xc0000000 0x8000000>;

  	Sören
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ