| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 9 Jun 2015 09:47:08 -0700
From: Tai Tri Nguyen <ttnguyen@....com>
To: Dann Frazier <dann.frazier@...onical.com>
Cc: arm@...nel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
patches <patches@....com>, Jon Masters <jcm@...hat.com>
Subject: Re: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node
for APM X-Gene platform
Hi Dann,
On Tue, Jun 9, 2015 at 8:31 AM, Dann Frazier <dann.frazier@...onical.com> wrote:
> On Mon, Jun 8, 2015 at 10:34 PM, Tai Tri Nguyen <ttnguyen@....com> wrote:
>> Hi Dann,
>>
>> On Mon, Jun 8, 2015 at 8:44 PM, Dann Frazier <dann.frazier@...onical.com> wrote:
>>> On Tue, Jun 2, 2015 at 1:19 PM, Tai Nguyen <ttnguyen@....com> wrote:
>>>> This patch adds syscon poweroff device node to support poweroff feature
>>>> on APM X-Gene Mustang platform
>>>
>>> hey Tai,
>>> The reboot changes work just fine for me, but poweroff does not:
>>>
>>> [ OK ] Reached target Final Step.
>>> Starting Power-Off...
>>> reboot: Power down
>>> Unable to poweroff system
>>> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
>>>
>>> CPU: 0 PID: 1 Comm: systemd-shutdow Tainted: G W 4.1.0-rc7+ #1
>>> Hardware name: APM X-Gene Mustang board (DT)
>>> Call trace:
>>> [<ffffffc00008990c>] dump_backtrace+0x0/0x11c
>>> [<ffffffc000089a38>] show_stack+0x10/0x1c
>>> [<ffffffc0005b447c>] dump_stack+0x88/0xc8
>>> [<ffffffc0005b3374>] panic+0xe0/0x220
>>> [<ffffffc0000b5f24>] do_exit+0x990/0x994
>>> [<ffffffc0000d06bc>] SyS_reboot+0x14c/0x208
>>> ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
>>>
>>> -dann
>>>
>>
>> Thanks for testing my patches.
>> On APM X-Gene Mustang platform, power off circuit is controlled by firmware.
>> It requires a firmware update to support power off feature.
>> May I ask what firmware version you're running on?
>
> Sure, 1.15.12.
>
> -dann
>
Just want to confirm you are booting in boot strap mode and had
SLIMpro firmware updated to 1.15.12 as well.
To check this, you should see this message in boot loader.
Slimpro FW:
Ver: 2.4 (build 01.15.12.00 2015/05/20)
I tested on a Mustang A3, this works just fine.
- Tai
>> Tai
>>
>>
>>>> Signed-off-by: Tai Nguyen <ttnguyen@....com>
>>>> ---
>>>> arch/arm64/boot/dts/apm/apm-mustang.dts | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
>>>> index 83578e7..910d561 100644
>>>> --- a/arch/arm64/boot/dts/apm/apm-mustang.dts
>>>> +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
>>>> @@ -23,6 +23,18 @@
>>>> device_type = "memory";
>>>> reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
>>>> };
>>>> +
>>>> + poweroff_mbox: poweroff_mbox@...48000 {
>>>> + compatible = "syscon";
>>>> + reg = <0x0 0x10548000 0x0 0x30>;
>>>> + };
>>>> +
>>>> + poweroff: poweroff@...48010 {
>>>> + compatible = "syscon-poweroff";
>>>> + regmap = <&poweroff_mbox>;
>>>> + offset = <0x10>;
>>>> + mask = <0x1>;
>>>> + };
>>>> };
>>>>
>>>> &pcie0clk {
>>>> --
>>>> 1.7.9.5
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel@...ts.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>>
>>
>> --
>> Tai
--
Tai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists