linux-kernel - Re: [RFC PATCH] usb: dwc3: ep0: Fix mem corruption on OUT transfers of more than 512 bytes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20150609171650.GC18072@saruman.tx.rr.com>
Date:	Tue, 9 Jun 2015 12:16:50 -0500
From:	Felipe Balbi <balbi@...com>
To:	Alan Stern <stern@...land.harvard.edu>
CC:	Kishon Vijay Abraham I <kishon@...com>,
	Michael Trimarchi <michael@...rulasolutions.com>,
	Felipe Balbi <balbi@...com>, <gregkh@...uxfoundation.org>,
	<linux-omap@...r.kernel.org>, <nsekhar@...com>,
	<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>
Subject: Re: [RFC PATCH] usb: dwc3: ep0: Fix mem corruption on OUT transfers
 of more than 512 bytes

On Tue, Jun 09, 2015 at 10:59:50AM -0400, Alan Stern wrote:
> On Tue, 9 Jun 2015, Kishon Vijay Abraham I wrote:
> 
> > Hi,
> > 
> > On Tuesday 09 June 2015 08:09 PM, Michael Trimarchi wrote:
> > > Hi
> > >
> > > On Jun 9, 2015 4:36 PM, "Kishon Vijay Abraham I" <kishon@...com
> > > <mailto:kishon@...com>> wrote:
> > >  >
> > >  > DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and
> > >  > the size of bounce buffer is 512 bytes. However if the host initiates OUT
> > >  > transfers of size more than 512 bytes (and non max packet aligned), the
> > >  > driver throws a WARN dump but still programs the TRB to receive more than
> > >  > 512 bytes. This will cause bounce buffer to overflow and corrupt the
> > >  > adjacent memory locations which can be fatal.
> > >  >
> > >  > Fix it by programming the TRB to receive a maximum of DWC3_EP0_BOUNCE_SIZE
> > >  > (512) bytes.
> > >  >
> > >  > Signed-off-by: Kishon Vijay Abraham I <kishon@...com <mailto:kishon@...com>>
> > >  > ---
> > >  > Steps to see the issue (before this patch)
> > >  > 1) Insert g_zero in DUT
> > >  > 2) run './testusb -t 14 -c 1 -s 520 -v 1' in host (size should be > 512)
> > >  >
> > >  > The test should FAIL since bounce buffer can handle only 512 bytes, but the
> > >  > test PASS. There is a WARN dump in DUT but still there will be memory
> > >  > corruption since the bounce buffer overflows.
> > >  >
> > >  > Tested this patch using USB3 Gen X CV (ch9 tests: usb2 and usb3, link layer
> > >  > testing and MSC tests) and using USB2 X CV (ch9 tests, MSC tests).
> > >  >
> > >  > After the patch, the tests timeout!
> > >  > ./testusb -t 14 -c 1 -s 514 -v 1
> > >  > unknown speed   /dev/bus/usb/001/018    0
> > >  > /dev/bus/usb/001/018 test 14 --> 110 (Connection timed out)
> > >  >
> > >  > IMO a patch to fix this is required for stable releases too. So If this
> > >  > patch is alright, I can post the patch cc'ing stable. While the actual fix
> > >  > would be to have chained TRB, I'm not sure if it can go to stable
> > >  > releases.
> > >  >  drivers/usb/dwc3/ep0.c |   12 ++++++++++--
> > >  >  1 file changed, 10 insertions(+), 2 deletions(-)
> > >  >
> > >  > diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
> > >  > index 2ef3c8d..8858c60 100644
> > >  > --- a/drivers/usb/dwc3/ep0.c
> > >  > +++ b/drivers/usb/dwc3/ep0.c
> > >  > @@ -816,6 +816,11 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
> > >  >                 unsigned maxp = ep0->endpoint.maxpacket;
> > >  >
> > >  >                 transfer_size += (maxp - (transfer_size % maxp));
> > >  > +
> > >  > +               /* Maximum of DWC3_EP0_BOUNCE_SIZE can only be received */
> > >  > +               if (transfer_size > DWC3_EP0_BOUNCE_SIZE)
> > >  > +                       transfer_size = DWC3_EP0_BOUNCE_SIZE;
> > >  > +
> > >
> > > Can you just use maxp in the correct way?
> > 
> > what do you mean by correct way? Using roundup() to calculate transfer_size?
> 
> Why not just make the bounce buffer size the same as the maxpacket 
> size?  In other words, 1024 bytes instead of 512, for ep0 on a USB-3 
> device.

EP0 max packet size is 512 on USB3.

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)