[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1433945046-19855-5-git-send-email-peter.griffin@linaro.org>
Date: Wed, 10 Jun 2015 15:04:01 +0100
From: Peter Griffin <peter.griffin@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
srinivas.kandagatla@...il.com, maxime.coquelin@...com,
patrice.chotard@...com
Cc: peter.griffin@...aro.org, lee.jones@...aro.org,
devicetree@...r.kernel.org, hugues.fruchet@...com
Subject: [PATCH 4/9] ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration
tsin3 channel can only be configured for serial data transfer.
On B2120 reference design tsin3 is brought out as TSB on the NIMB
slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 6b11568..13b469c 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -522,6 +522,18 @@
};
};
};
+
+ tsin3 {
+ pinctrl_tsin3_serial: tsin3_serial {
+ st,pins {
+ DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-front1 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists