| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1433949712-5648-11-git-send-email-madalin.bucur@freescale.com>
Date: Wed, 10 Jun 2015 18:21:50 +0300
From: Madalin Bucur <madalin.bucur@...escale.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linuxppc-dev@...ts.ozlabs.org>
CC: <scottwood@...escale.com>,
Igal Liberman <Igal.Liberman@...escale.com>
Subject: [PATCH 05/12] fsl/fman: Add the FMan MAC FLIB headers
From: Igal Liberman <Igal.Liberman@...escale.com>
The FMan MAC FLib provides basic API used by the drivers to
configure and control the FMan MAC hardware.
Signed-off-by: Igal Liberman <Igal.Liberman@...escale.com>
---
.../net/ethernet/freescale/fman/flib/fsl_enet.h | 275 +++++++
.../ethernet/freescale/fman/flib/fsl_fman_dtsec.h | 791 +++++++++++++++++++++
.../freescale/fman/flib/fsl_fman_dtsec_mii_acc.h | 103 +++
.../ethernet/freescale/fman/flib/fsl_fman_memac.h | 453 ++++++++++++
.../freescale/fman/flib/fsl_fman_memac_mii_acc.h | 76 ++
.../ethernet/freescale/fman/flib/fsl_fman_tgec.h | 409 +++++++++++
6 files changed, 2107 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_enet.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_enet.h b/drivers/net/ethernet/freescale/fman/flib/fsl_enet.h
new file mode 100644
index 0000000..78e7d04
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_enet.h
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_ENET_H
+#define __FSL_ENET_H
+
+/*Ethernet MAC-PHY Interface */
+
+enum enet_interface {
+ E_ENET_IF_MII = 0x00010000, /* MII interface */
+ E_ENET_IF_RMII = 0x00020000, /* RMII interface */
+ E_ENET_IF_SMII = 0x00030000, /* SMII interface */
+ E_ENET_IF_GMII = 0x00040000, /* GMII interface */
+ E_ENET_IF_RGMII = 0x00050000, /* RGMII interface */
+ E_ENET_IF_TBI = 0x00060000, /* TBI interface */
+ E_ENET_IF_RTBI = 0x00070000, /* RTBI interface */
+ E_ENET_IF_SGMII = 0x00080000, /* SGMII interface */
+ E_ENET_IF_XGMII = 0x00090000, /* XGMII interface */
+ E_ENET_IF_QSGMII = 0x000a0000, /* QSGMII interface */
+ E_ENET_IF_XFI = 0x000b0000 /* XFI interface */
+};
+
+/* Ethernet Speed (nominal data rate) */
+enum enet_speed {
+ E_ENET_SPEED_10 = 10, /* 10 Mbps */
+ E_ENET_SPEED_100 = 100, /* 100 Mbps */
+ E_ENET_SPEED_1000 = 1000, /* 1000 Mbps = 1 Gbps */
+ E_ENET_SPEED_10000 = 10000 /* 10000 Mbps = 10 Gbps */
+};
+
+enum mac_type {
+ E_MAC_DTSEC,
+ E_MAC_TGEC,
+ E_MAC_MEMAC
+};
+
+/* Enum for inter-module interrupts registration */
+enum fman_event_modules {
+ E_FMAN_MOD_PRS, /* Parser event */
+ E_FMAN_MOD_KG, /* Keygen event */
+ E_FMAN_MOD_PLCR, /* Policer event */
+ E_FMAN_MOD_10G_MAC, /* 10G MAC event */
+ E_FMAN_MOD_1G_MAC, /* 1G MAC event */
+ E_FMAN_MOD_TMR, /* Timer event */
+ E_FMAN_MOD_FMAN_CTRL, /* FMAN Controller Timer event */
+ E_FMAN_MOD_MACSEC,
+ E_FMAN_MOD_DUMMY_LAST
+};
+
+/* Enum for interrupts types */
+enum fman_intr_type {
+ E_FMAN_INTR_TYPE_ERR,
+ E_FMAN_INTR_TYPE_NORMAL
+};
+
+/* enum for defining MAC types */
+enum fman_mac_type {
+ E_FMAN_MAC_10G = 0, /* 10G MAC */
+ E_FMAN_MAC_1G /* 1G MAC */
+};
+
+enum fman_mac_exceptions {
+ E_FMAN_MAC_EX_10G_MDIO_SCAN_EVENTMDIO = 0,
+ /* 10GEC MDIO scan event interrupt */
+ E_FMAN_MAC_EX_10G_MDIO_CMD_CMPL,
+ /* 10GEC MDIO command completion interrupt */
+ E_FMAN_MAC_EX_10G_REM_FAULT,
+ /* 10GEC, mEMAC Remote fault interrupt */
+ E_FMAN_MAC_EX_10G_LOC_FAULT,
+ /* 10GEC, mEMAC Local fault interrupt */
+ E_FMAN_MAC_EX_10G_1TX_ECC_ER,
+ /* 10GEC, mEMAC Transmit frame ECC error interrupt */
+ E_FMAN_MAC_EX_10G_TX_FIFO_UNFL,
+ /* 10GEC, mEMAC Transmit FIFO underflow interrupt */
+ E_FMAN_MAC_EX_10G_TX_FIFO_OVFL,
+ /* 10GEC, mEMAC Transmit FIFO overflow interrupt */
+ E_FMAN_MAC_EX_10G_TX_ER,
+ /* 10GEC Transmit frame error interrupt */
+ E_FMAN_MAC_EX_10G_RX_FIFO_OVFL,
+ /* 10GEC, mEMAC Receive FIFO overflow interrupt */
+ E_FMAN_MAC_EX_10G_RX_ECC_ER,
+ /* 10GEC, mEMAC Receive frame ECC error interrupt */
+ E_FMAN_MAC_EX_10G_RX_JAB_FRM,
+ /* 10GEC Receive jabber frame interrupt */
+ E_FMAN_MAC_EX_10G_RX_OVRSZ_FRM,
+ /* 10GEC Receive oversized frame interrupt */
+ E_FMAN_MAC_EX_10G_RX_RUNT_FRM,
+ /* 10GEC Receive runt frame interrupt */
+ E_FMAN_MAC_EX_10G_RX_FRAG_FRM,
+ /* 10GEC Receive fragment frame interrupt */
+ E_FMAN_MAC_EX_10G_RX_LEN_ER,
+ /* 10GEC Receive payload length error interrupt */
+ E_FMAN_MAC_EX_10G_RX_CRC_ER,
+ /* 10GEC Receive CRC error interrupt */
+ E_FMAN_MAC_EX_10G_RX_ALIGN_ER,
+ /* 10GEC Receive alignment error interrupt */
+ E_FMAN_MAC_EX_1G_BAB_RX,
+ /* dTSEC Babbling receive error */
+ E_FMAN_MAC_EX_1G_RX_CTL,
+ /* dTSEC Receive control (pause frame) interrupt */
+ E_FMAN_MAC_EX_1G_GRATEFUL_TX_STP_COMPLET,
+ /* dTSEC Graceful transmit stop complete */
+ E_FMAN_MAC_EX_1G_BAB_TX,
+ /* dTSEC Babbling transmit error */
+ E_FMAN_MAC_EX_1G_TX_CTL,
+ /* dTSEC Transmit control (pause frame) interrupt */
+ E_FMAN_MAC_EX_1G_TX_ERR,
+ /* dTSEC Transmit error */
+ E_FMAN_MAC_EX_1G_LATE_COL,
+ /* dTSEC Late collision */
+ E_FMAN_MAC_EX_1G_COL_RET_LMT,
+ /* dTSEC Collision retry limit */
+ E_FMAN_MAC_EX_1G_TX_FIFO_UNDRN,
+ /* dTSEC Transmit FIFO underrun */
+ E_FMAN_MAC_EX_1G_MAG_PCKT,
+ /* dTSEC Magic Packet detection */
+ E_FMAN_MAC_EX_1G_MII_MNG_RD_COMPLET,
+ /* dTSEC MII management read completion */
+ E_FMAN_MAC_EX_1G_MII_MNG_WR_COMPLET,
+ /* dTSEC MII management write completion */
+ E_FMAN_MAC_EX_1G_GRATEFUL_RX_STP_COMPLET,
+ /* dTSEC Graceful receive stop complete */
+ E_FMAN_MAC_EX_1G_TX_DATA_ERR,
+ /* dTSEC Internal data error on transmit */
+ E_FMAN_MAC_EX_1G_RX_DATA_ERR,
+ /* dTSEC Internal data error on receive */
+ E_FMAN_MAC_EX_1G_1588_TS_RX_ERR,
+ /* dTSEC Time-Stamp Receive Error */
+ E_FMAN_MAC_EX_1G_RX_MIB_CNT_OVFL,
+ /* dTSEC MIB counter overflow */
+ E_FMAN_MAC_EX_TS_FIFO_ECC_ERR,
+ /* < mEMAC Time-stamp FIFO ECC error interrupt;
+ * not supported on T4240/B4860 rev1 chips
+ */
+};
+
+/* SGMII/QSGII interface with 1000BaseX auto-negotiation between MAC
+ * and phy or backplane;
+ * Note: 1000BaseX auto-negotiation relates only to interface between MAC
+ * and phy/backplane, SGMII phy can still synchronize with far-end phy at
+ * 10Mbps, 100Mbps or 1000Mbps
+ */
+#define ENET_IF_SGMII_BASEX 0x80000000
+
+enum enet_mode {
+ E_ENET_MODE_INVALID = 0,
+ /* Invalid Ethernet mode */
+ E_ENET_MODE_MII_10 = (E_ENET_IF_MII | E_ENET_SPEED_10),
+ /* 10 Mbps MII */
+ E_ENET_MODE_MII_100 = (E_ENET_IF_MII | E_ENET_SPEED_100),
+ /* 100 Mbps MII */
+ E_ENET_MODE_RMII_10 = (E_ENET_IF_RMII | E_ENET_SPEED_10),
+ /* 10 Mbps RMII */
+ E_ENET_MODE_RMII_100 = (E_ENET_IF_RMII | E_ENET_SPEED_100),
+ /* 100 Mbps RMII */
+ E_ENET_MODE_SMII_10 = (E_ENET_IF_SMII | E_ENET_SPEED_10),
+ /* 10 Mbps SMII */
+ E_ENET_MODE_SMII_100 = (E_ENET_IF_SMII | E_ENET_SPEED_100),
+ /* 100 Mbps SMII */
+ E_ENET_MODE_GMII_1000 = (E_ENET_IF_GMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps GMII */
+ E_ENET_MODE_RGMII_10 = (E_ENET_IF_RGMII | E_ENET_SPEED_10),
+ /* 10 Mbps RGMII */
+ E_ENET_MODE_RGMII_100 = (E_ENET_IF_RGMII | E_ENET_SPEED_100),
+ /* 100 Mbps RGMII */
+ E_ENET_MODE_RGMII_1000 = (E_ENET_IF_RGMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps RGMII */
+ E_ENET_MODE_TBI_1000 = (E_ENET_IF_TBI | E_ENET_SPEED_1000),
+ /* 1000 Mbps TBI */
+ E_ENET_MODE_RTBI_1000 = (E_ENET_IF_RTBI | E_ENET_SPEED_1000),
+ /* 1000 Mbps RTBI */
+ E_ENET_MODE_SGMII_10 = (E_ENET_IF_SGMII | E_ENET_SPEED_10),
+ /* 10 Mbps SGMII with auto-negotiation between MAC and
+ * SGMII phy according to Cisco SGMII specification
+ */
+ E_ENET_MODE_SGMII_100 = (E_ENET_IF_SGMII | E_ENET_SPEED_100),
+ /* 100 Mbps SGMII with auto-negotiation between MAC and
+ * SGMII phy according to Cisco SGMII specification
+ */
+ E_ENET_MODE_SGMII_1000 = (E_ENET_IF_SGMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps SGMII with auto-negotiation between MAC and
+ * SGMII phy according to Cisco SGMII specification
+ */
+ E_ENET_MODE_SGMII_BASEX_10 = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
+ | E_ENET_SPEED_10),
+ /* 10 Mbps SGMII with 1000BaseX auto-negotiation between
+ * MAC and SGMII phy or backplane
+ */
+ E_ENET_MODE_SGMII_BASEX_100 = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
+ | E_ENET_SPEED_100),
+ /* 100 Mbps SGMII with 1000BaseX auto-negotiation between
+ * MAC and SGMII phy or backplane
+ */
+ E_ENET_MODE_SGMII_BASEX_1000 = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
+ | E_ENET_SPEED_1000),
+ /* 1000 Mbps SGMII with 1000BaseX auto-negotiation between
+ * MAC and SGMII phy or backplane
+ */
+ E_ENET_MODE_QSGMII_1000 = (E_ENET_IF_QSGMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps QSGMII with auto-negotiation between MAC and
+ * QSGMII phy according to Cisco QSGMII specification
+ */
+ E_ENET_MODE_QSGMII_BASEX_1000 = (ENET_IF_SGMII_BASEX | E_ENET_IF_QSGMII
+ | E_ENET_SPEED_1000),
+ /* 1000 Mbps QSGMII with 1000BaseX auto-negotiation between
+ * MAC and QSGMII phy or backplane
+ */
+ E_ENET_MODE_XGMII_10000 = (E_ENET_IF_XGMII | E_ENET_SPEED_10000),
+ /* 10000 Mbps XGMII */
+ E_ENET_MODE_XFI_10000 = (E_ENET_IF_XFI | E_ENET_SPEED_10000)
+ /* 10000 Mbps XFI */
+};
+
+enum fmam_mac_statistics_level {
+ E_FMAN_MAC_NONE_STATISTICS, /* No statistics */
+ E_FMAN_MAC_PARTIAL_STATISTICS, /* Only error counters are available;
+ * Optimized for performance
+ */
+ E_FMAN_MAC_FULL_STATISTICS /* All counters available; Not
+ * optimized for performance
+ */
+};
+
+#define _MAKE_ENET_MODE(_interface, _speed) (enum enet_mode)((_interface) \
+ | (_speed))
+
+#define _ENET_INTERFACE_FROM_MODE(mode) \
+ ((enum enet_interface)((mode) & 0x0FFF0000))
+
+#define _ENET_SPEED_FROM_MODE(mode) (enum enet_speed)((mode) & 0x0000FFFF)
+#define _ENET_ADDR_TO_UINT64(_enet_addr) \
+ (uint64_t)(((uint64_t)(_enet_addr)[0] << 40) | \
+ ((uint64_t)(_enet_addr)[1] << 32) | \
+ ((uint64_t)(_enet_addr)[2] << 24) | \
+ ((uint64_t)(_enet_addr)[3] << 16) | \
+ ((uint64_t)(_enet_addr)[4] << 8) | \
+ ((uint64_t)(_enet_addr)[5]))
+
+#define _MAKE_ENET_ADDR_FROM_UINT64(_addr64, _enet_addr) \
+ do { \
+ int i; \
+ for (i = 0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++) \
+ (_enet_addr)[i] = \
+ (uint8_t)((_addr64) >> ((5 - i) * 8)); \
+ } while (0)
+
+#endif /* __FSL_ENET_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h
new file mode 100644
index 0000000..ef753b3
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h
@@ -0,0 +1,791 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_DTSEC_H
+#define __FSL_FMAN_DTSEC_H
+
+#include "common/general.h"
+#include "fsl_enet.h"
+
+/* dTSEC Init sequence
+ *To prepare dTSEC block for transfer use the following call sequence:
+ *- fman_dtsec_defconfig() - This step is optional and yet recommended. Its
+ *use is to obtain the default dTSEC configuration parameters.
+ *- Change dtsec configuration in &dtsec_cfg. This structure will be used
+ *to customize the dTSEC behavior.
+ *- fman_dtsec_init() - Applies the configuration on dTSEC hardware. Note that
+ *dTSEC is initialized while both Tx and Rx are disabled.
+ *- fman_dtsec_set_mac_address() - Set the station address (mac address).
+ *This is used by dTSEC to match against received packets.
+ *
+ *- fman_dtsec_adjust_link() - Set the link speed and duplex parameters
+ *after the PHY establishes the link.
+ *- dtsec_enable_tx() and dtsec_enable_rx() to enable transmission and
+ *reception.
+ */
+
+/* dTSEC Graceful stop
+ *To temporary stop dTSEC activity use fman_dtsec_stop_tx() and
+ *fman_dtsec_stop_rx(). Note that these functions request dTSEC graceful stop
+ *but return before this stop is complete. To query for graceful stop
+ *completion use fman_dtsec_get_event() and check DTSEC_IEVENT_GTSC and
+ *DTSEC_IEVENT_GRSC bits. Alternatively the dTSEC interrupt mask can be set to
+ *enable graceful stop interrupts.
+ *To resume operation after graceful stop use fman_dtsec_start_tx() and
+ *fman_dtsec_start_rx().
+ */
+
+/* dTSEC interrupt handling
+ *
+ *This code does not provide an interrupt handler for dTSEC. Instead this
+ *handler should be implemented and registered to the operating system by the
+ *caller. Some primitives for accessing the event status and mask registers
+ *are provided.
+ *See "dTSEC Events" section for a list of events that dTSEC can generate.
+ */
+
+/*dTSEC Events
+ *Interrupt events cause dTSEC event bits to be set. Software may poll the
+ *event register at any time to check for pending interrupts. If an event
+ *occurs and its corresponding enable bit is set in the interrupt mask
+ *register, the event also causes a hardware interrupt at the PIC.
+ *To poll for event status use the fman_dtsec_get_event() function.
+ *To configure the interrupt mask use fman_dtsec_enable_interrupt() and
+ *fman_dtsec_disable_interrupt() functions.
+ *After servicing a dTSEC interrupt use fman_dtsec_ack_event to reset the
+ *serviced event bit.
+ *The following events may be signaled by dTSEC hardware:
+ *%DTSEC_IEVENT_BABR - Babbling receive error. This bit indicates that
+ *a frame was received with length in excess of the MAC's maximum frame length
+ *register.
+ *%DTSEC_IEVENT_RXC - Receive control (pause frame) interrupt. A pause
+ *control frame was received while Rx pause frame handling is enabled.
+ *Also see fman_dtsec_handle_rx_pause().
+ *%DTSEC_IEVENT_MSRO - MIB counter overflow. The count for one of the MIB
+ *counters has exceeded the size of its register.
+ *%DTSEC_IEVENT_GTSC - Graceful transmit stop complete. Graceful stop is now
+ *complete. The transmitter is in a stopped state, in which only pause frames
+ *can be transmitted.
+ *Also see fman_dtsec_stop_tx().
+ *%DTSEC_IEVENT_BABT - Babbling transmit error. The transmitted frame length
+ *has exceeded the value in the MAC's Maximum Frame Length register.
+ *%DTSEC_IEVENT_TXC - Transmit control (pause frame) interrupt. his bit
+ *indicates that a control frame was transmitted.
+ *%DTSEC_IEVENT_TXE - Transmit error. This bit indicates that an error
+ *occurred on the transmitted channel. This bit is set whenever any transmit
+ *error occurs which causes the dTSEC to discard all or part of a frame
+ *(LC, CRL, XFUN).
+ *%DTSEC_IEVENT_LC - Late collision. This bit indicates that a collision
+ *occurred beyond the collision window (slot time) in half-duplex mode.
+ *The frame is truncated with a bad CRC and the remainder of the frame
+ *is discarded.
+ *%DTSEC_IEVENT_CRL - Collision retry limit. is bit indicates that the number
+ *of successive transmission collisions has exceeded the MAC's half-duplex
+ *register's retransmission maximum count. The frame is discarded without
+ *being transmitted and transmission of the next frame commences. This only
+ *occurs while in half-duplex mode.
+ *The number of retransmit attempts can be set in
+ *&dtsec_halfdup_cfg.retransmit before calling fman_dtsec_init().
+ *%DTSEC_IEVENT_XFUN - Transmit FIFO underrun. This bit indicates that the
+ *transmit FIFO became empty before the complete frame was transmitted.
+ *The frame is truncated with a bad CRC and the remainder of the frame is
+ *discarded.
+ *%DTSEC_IEVENT_MAG - TBD
+ *%DTSEC_IEVENT_MMRD - MII management read completion.
+ *%DTSEC_IEVENT_MMWR - MII management write completion.
+ *%DTSEC_IEVENT_GRSC - Graceful receive stop complete. It allows the user to
+ *know if the system has completed the stop and it is safe to write to receive
+ *registers (status, control or configuration registers) that are used by the
+ *system during normal operation.
+ *%DTSEC_IEVENT_TDPE - Internal data error on transmit. This bit indicates
+ *that the dTSEC has detected a parity error on its stored transmit data, which
+ *is likely to compromise the validity of recently transferred frames.
+ *%DTSEC_IEVENT_RDPE - Internal data error on receive. This bit indicates that
+ *the dTSEC has detected a parity error on its stored receive data, which is
+ *likely to compromise the validity of recently transferred frames.
+ */
+/* Interrupt Mask Register (IMASK) */
+#define DTSEC_IMASK_BREN 0x80000000
+#define DTSEC_IMASK_RXCEN 0x40000000
+#define DTSEC_IMASK_MSROEN 0x04000000
+#define DTSEC_IMASK_GTSCEN 0x02000000
+#define DTSEC_IMASK_BTEN 0x01000000
+#define DTSEC_IMASK_TXCEN 0x00800000
+#define DTSEC_IMASK_TXEEN 0x00400000
+#define DTSEC_IMASK_LCEN 0x00040000
+#define DTSEC_IMASK_CRLEN 0x00020000
+#define DTSEC_IMASK_XFUNEN 0x00010000
+#define DTSEC_IMASK_ABRTEN 0x00008000
+#define DTSEC_IMASK_IFERREN 0x00004000
+#define DTSEC_IMASK_MAGEN 0x00000800
+#define DTSEC_IMASK_MMRDEN 0x00000400
+#define DTSEC_IMASK_MMWREN 0x00000200
+#define DTSEC_IMASK_GRSCEN 0x00000100
+#define DTSEC_IMASK_TDPEEN 0x00000002
+#define DTSEC_IMASK_RDPEEN 0x00000001
+
+#define DTSEC_EVENTS_MASK \
+ ((uint32_t)(DTSEC_IMASK_BREN | \
+ DTSEC_IMASK_RXCEN | \
+ DTSEC_IMASK_BTEN | \
+ DTSEC_IMASK_TXCEN | \
+ DTSEC_IMASK_TXEEN | \
+ DTSEC_IMASK_ABRTEN | \
+ DTSEC_IMASK_LCEN | \
+ DTSEC_IMASK_CRLEN | \
+ DTSEC_IMASK_XFUNEN | \
+ DTSEC_IMASK_IFERREN | \
+ DTSEC_IMASK_MAGEN | \
+ DTSEC_IMASK_TDPEEN | \
+ DTSEC_IMASK_RDPEEN))
+
+/* dtsec timestamp event bits */
+#define TMR_PEMASK_TSREEN 0x00010000
+#define TMR_PEVENT_TSRE 0x00010000
+
+/* Group address bit indication */
+#define MAC_GROUP_ADDRESS 0x0000010000000000ULL
+/* size in bytes of L2 address */
+#define MAC_ADDRLEN 6
+
+#define DEFAULT_HALFDUP_ON false
+#define DEFAULT_HALFDUP_RETRANSMIT 0xf
+#define DEFAULT_HALFDUP_COLL_WINDOW 0x37
+#define DEFAULT_HALFDUP_EXCESS_DEFER true
+#define DEFAULT_HALFDUP_NO_BACKOFF false
+#define DEFAULT_HALFDUP_BP_NO_BACKOFF false
+#define DEFAULT_HALFDUP_ALT_BACKOFF_VAL 0x0A
+#define DEFAULT_HALFDUP_ALT_BACKOFF_EN false
+#define DEFAULT_RX_DROP_BCAST false
+#define DEFAULT_RX_SHORT_FRM true
+#define DEFAULT_RX_LEN_CHECK false
+#define DEFAULT_TX_PAD_CRC true
+#define DEFAULT_TX_CRC false
+#define DEFAULT_RX_CTRL_ACC false
+#define DEFAULT_TX_PAUSE_TIME 0xf000
+#define DEFAULT_TBIPA 5
+#define DEFAULT_RX_PREPEND 0
+#define DEFAULT_PTP_TSU_EN true
+#define DEFAULT_PTP_EXCEPTION_EN true
+#define DEFAULT_PREAMBLE_LEN 7
+#define DEFAULT_RX_PREAMBLE false
+#define DEFAULT_TX_PREAMBLE false
+#define DEFAULT_LOOPBACK false
+#define DEFAULT_RX_TIME_STAMP_EN false
+#define DEFAULT_TX_TIME_STAMP_EN false
+#define DEFAULT_RX_FLOW true
+#define DEFAULT_TX_FLOW true
+#define DEFAULT_RX_GROUP_HASH_EXD false
+#define DEFAULT_TX_PAUSE_TIME_EXTD 0
+#define DEFAULT_RX_PROMISC false
+#define DEFAULT_NON_BACK_TO_BACK_IPG1 0x40
+#define DEFAULT_NON_BACK_TO_BACK_IPG2 0x60
+#define DEFAULT_MIN_IFG_ENFORCEMENT 0x50
+#define DEFAULT_BACK_TO_BACK_IPG 0x60
+#define DEFAULT_MAXIMUM_FRAME 0x600
+#define DEFAULT_TBI_PHY_ADDR 5
+#define DEFAULT_WAKE_ON_LAN false
+
+/* register related defines (bits, field offsets..) */
+#define DTSEC_ID1_ID 0xffff0000
+#define DTSEC_ID1_REV_MJ 0x0000FF00
+#define DTSEC_ID1_REV_MN 0x000000ff
+
+#define DTSEC_ID2_INT_REDUCED_OFF 0x00010000
+#define DTSEC_ID2_INT_NORMAL_OFF 0x00020000
+
+#define DTSEC_ECNTRL_CLRCNT 0x00004000
+#define DTSEC_ECNTRL_AUTOZ 0x00002000
+#define DTSEC_ECNTRL_STEN 0x00001000
+#define DTSEC_ECNTRL_CFG_RO 0x80000000
+#define DTSEC_ECNTRL_GMIIM 0x00000040
+#define DTSEC_ECNTRL_TBIM 0x00000020
+#define DTSEC_ECNTRL_SGMIIM 0x00000002
+#define DTSEC_ECNTRL_RPM 0x00000010
+#define DTSEC_ECNTRL_R100M 0x00000008
+#define DTSEC_ECNTRL_RMM 0x00000004
+#define DTSEC_ECNTRL_QSGMIIM 0x00000001
+
+#define DTSEC_TCTRL_THDF 0x00000800
+#define DTSEC_TCTRL_TTSE 0x00000040
+#define DTSEC_TCTRL_GTS 0x00000020
+#define DTSEC_TCTRL_TFC_PAUSE 0x00000010
+
+/* PTV offsets */
+#define PTV_PTE_OFST 16
+
+#define RCTRL_CFA 0x00008000
+#define RCTRL_GHTX 0x00000400
+#define RCTRL_RTSE 0x00000040
+#define RCTRL_GRS 0x00000020
+#define RCTRL_BC_REJ 0x00000010
+#define RCTRL_MPROM 0x00000008
+#define RCTRL_RSF 0x00000004
+#define RCTRL_UPROM 0x00000001
+#define RCTRL_PROM (RCTRL_UPROM | RCTRL_MPROM)
+
+#define TMR_CTL_ESFDP 0x00000800
+#define TMR_CTL_ESFDE 0x00000400
+
+#define MACCFG1_SOFT_RESET 0x80000000
+#define MACCFG1_LOOPBACK 0x00000100
+#define MACCFG1_RX_FLOW 0x00000020
+#define MACCFG1_TX_FLOW 0x00000010
+#define MACCFG1_TX_EN 0x00000001
+#define MACCFG1_RX_EN 0x00000004
+
+#define MACCFG2_NIBBLE_MODE 0x00000100
+#define MACCFG2_BYTE_MODE 0x00000200
+#define MACCFG2_PRE_AM_RX_EN 0x00000080
+#define MACCFG2_PRE_AM_TX_EN 0x00000040
+#define MACCFG2_LENGTH_CHECK 0x00000010
+#define MACCFG2_MAGIC_PACKET_EN 0x00000008
+#define MACCFG2_PAD_CRC_EN 0x00000004
+#define MACCFG2_CRC_EN 0x00000002
+#define MACCFG2_FULL_DUPLEX 0x00000001
+
+#define PREAMBLE_LENGTH_SHIFT 12
+
+#define IPGIFG_NON_BACK_TO_BACK_IPG_1_SHIFT 24
+#define IPGIFG_NON_BACK_TO_BACK_IPG_2_SHIFT 16
+#define IPGIFG_MIN_IFG_ENFORCEMENT_SHIFT 8
+
+#define IPGIFG_NON_BACK_TO_BACK_IPG_1 0x7F000000
+#define IPGIFG_NON_BACK_TO_BACK_IPG_2 0x007F0000
+#define IPGIFG_MIN_IFG_ENFORCEMENT 0x0000FF00
+#define IPGIFG_BACK_TO_BACK_IPG 0x0000007F
+
+#define HAFDUP_ALT_BEB 0x00080000
+#define HAFDUP_BP_NO_BACKOFF 0x00040000
+#define HAFDUP_NO_BACKOFF 0x00020000
+#define HAFDUP_EXCESS_DEFER 0x00010000
+#define HAFDUP_COLLISION_WINDOW 0x000003ff
+
+#define HAFDUP_ALTERNATE_BEB_TRUNCATION_SHIFT 20
+#define HAFDUP_RETRANSMISSION_MAX_SHIFT 12
+#define HAFDUP_RETRANSMISSION_MAX 0x0000f000
+
+#define NUM_OF_HASH_REGS 8 /* Number of hash table registers */
+
+/* CAR1/2 bits */
+#define DTSEC_CAR1_TR64 0x80000000
+#define DTSEC_CAR1_TR127 0x40000000
+#define DTSEC_CAR1_TR255 0x20000000
+#define DTSEC_CAR1_TR511 0x10000000
+#define DTSEC_CAR1_TRK1 0x08000000
+#define DTSEC_CAR1_TRMAX 0x04000000
+#define DTSEC_CAR1_TRMGV 0x02000000
+
+#define DTSEC_CAR1_RBYT 0x00010000
+#define DTSEC_CAR1_RPKT 0x00008000
+#define DTSEC_CAR1_RFCS 0x00004000
+#define DTSEC_CAR1_RMCA 0x00002000
+#define DTSEC_CAR1_RBCA 0x00001000
+#define DTSEC_CAR1_RXCF 0x00000800
+#define DTSEC_CAR1_RXPF 0x00000400
+#define DTSEC_CAR1_RXUO 0x00000200
+#define DTSEC_CAR1_RALN 0x00000100
+#define DTSEC_CAR1_RFLR 0x00000080
+#define DTSEC_CAR1_RCDE 0x00000040
+#define DTSEC_CAR1_RCSE 0x00000020
+#define DTSEC_CAR1_RUND 0x00000010
+#define DTSEC_CAR1_ROVR 0x00000008
+#define DTSEC_CAR1_RFRG 0x00000004
+#define DTSEC_CAR1_RJBR 0x00000002
+#define DTSEC_CAR1_RDRP 0x00000001
+
+#define DTSEC_CAR2_TJBR 0x00080000
+#define DTSEC_CAR2_TFCS 0x00040000
+#define DTSEC_CAR2_TXCF 0x00020000
+#define DTSEC_CAR2_TOVR 0x00010000
+#define DTSEC_CAR2_TUND 0x00008000
+#define DTSEC_CAR2_TFRG 0x00004000
+#define DTSEC_CAR2_TBYT 0x00002000
+#define DTSEC_CAR2_TPKT 0x00001000
+#define DTSEC_CAR2_TMCA 0x00000800
+#define DTSEC_CAR2_TBCA 0x00000400
+#define DTSEC_CAR2_TXPF 0x00000200
+#define DTSEC_CAR2_TDFR 0x00000100
+#define DTSEC_CAR2_TEDF 0x00000080
+#define DTSEC_CAR2_TSCL 0x00000040
+#define DTSEC_CAR2_TMCL 0x00000020
+#define DTSEC_CAR2_TLCL 0x00000010
+#define DTSEC_CAR2_TXCL 0x00000008
+#define DTSEC_CAR2_TNCL 0x00000004
+#define DTSEC_CAR2_TDRP 0x00000001
+
+/* memory map */
+
+struct dtsec_regs {
+ /* dTSEC General Control and Status Registers */
+ uint32_t tsec_id; /* 0x000 ETSEC_ID register */
+ uint32_t tsec_id2; /* 0x004 ETSEC_ID2 register */
+ uint32_t ievent; /* 0x008 Interrupt event register */
+ uint32_t imask; /* 0x00C Interrupt mask register */
+ uint32_t reserved0010[1];
+ uint32_t ecntrl; /* 0x014 E control register */
+ uint32_t ptv; /* 0x018 Pause time value register */
+ uint32_t tbipa; /* 0x01C TBI PHY address register */
+ uint32_t tmr_ctrl; /* 0x020 Time-stamp Control register */
+ uint32_t tmr_pevent; /* 0x024 Time-stamp event register */
+ uint32_t tmr_pemask; /* 0x028 Timer event mask register */
+ uint32_t reserved002c[5];
+ uint32_t tctrl; /* 0x040 Transmit control register */
+ uint32_t reserved0044[3];
+ uint32_t rctrl; /* 0x050 Receive control register */
+ uint32_t reserved0054[11];
+ uint32_t igaddr[8]; /* 0x080-0x09C Individual/group address */
+ uint32_t gaddr[8]; /* 0x0A0-0x0BC Group address registers 0-7 */
+ uint32_t reserved00c0[16];
+ uint32_t maccfg1; /* 0x100 MAC configuration #1 */
+ uint32_t maccfg2; /* 0x104 MAC configuration #2 */
+ uint32_t ipgifg; /* 0x108 IPG/IFG */
+ uint32_t hafdup; /* 0x10C Half-duplex */
+ uint32_t maxfrm; /* 0x110 Maximum frame */
+ uint32_t reserved0114[10];
+ uint32_t ifstat; /* 0x13C Interface status */
+ uint32_t macstnaddr1; /* 0x140 Station Address,part 1 */
+ uint32_t macstnaddr2; /* 0x144 Station Address,part 2 */
+ struct {
+ uint32_t exact_match1; /* octets 1-4 */
+ uint32_t exact_match2; /* octets 5-6 */
+ } macaddr[15]; /* 0x148-0x1BC mac exact match addresses 1-15 */
+ uint32_t reserved01c0[16];
+ /* 0x200 transmit and receive 64 byte frame counter */
+ uint32_t tr64;
+ /* 0x204 transmit and receive 65 to 127 byte frame counter */
+ uint32_t tr127;
+ /* 0x208 transmit and receive 128 to 255 byte frame counter */
+ uint32_t tr255;
+ /* 0x20C transmit and receive 256 to 511 byte frame counter */
+ uint32_t tr511;
+ /* 0x210 transmit and receive 512 to 1023 byte frame counter */
+ uint32_t tr1k;
+ /* 0x214 transmit and receive 1024 to 1518 byte frame counter */
+ uint32_t trmax;
+ /* 0x218 transmit and receive 1519 to 1522 byte good VLAN frame count*/
+ uint32_t trmgv;
+ uint32_t rbyt; /* 0x21C receive byte counter */
+ uint32_t rpkt; /* 0x220 receive packet counter */
+ uint32_t rfcs; /* 0x224 receive FCS error counter */
+ /* 0x228 RMCA receive multicast packet counter */
+ uint32_t rmca;
+ uint32_t rbca; /* 0x22C receive broadcast packet counter */
+ uint32_t rxcf; /* 0x230 receive control frame packet counter */
+ uint32_t rxpf; /* 0x234 receive pause frame packet counter */
+ uint32_t rxuo; /* 0x238 receive unknown OP code counter */
+ uint32_t raln; /* 0x23C receive alignment error counter */
+ uint32_t rflr; /* 0x240 receive frame length error counter */
+ uint32_t rcde; /* 0x244 receive code error counter */
+ uint32_t rcse; /* 0x248 receive carrier sense error counter */
+ uint32_t rund; /* 0x24C receive undersize packet counter */
+ uint32_t rovr; /* 0x250 receive oversize packet counter */
+ uint32_t rfrg; /* 0x254 receive fragments counter */
+ uint32_t rjbr; /* 0x258 receive jabber counter */
+ uint32_t rdrp; /* 0x25C receive drop */
+ uint32_t tbyt; /* 0x260 transmit byte counter */
+ uint32_t tpkt; /* 0x264 transmit packet counter */
+ uint32_t tmca; /* 0x268 transmit multicast packet counter */
+ uint32_t tbca; /* 0x26C transmit broadcast packet counter */
+ uint32_t txpf; /* 0x270 transmit pause control frame counter */
+ uint32_t tdfr; /* 0x274 transmit deferral packet counter */
+ /* 0x278 transmit excessive deferral packet counter */
+ uint32_t tedf;
+ /* 0x27C transmit single collision packet counter */
+ uint32_t tscl;
+ /* 0x280 transmit multiple collision packet counter */
+ uint32_t tmcl;
+ /* 0x284 transmit late collision packet counter */
+ uint32_t tlcl;
+ /* 0x288 transmit excessive collision packet counter */
+ uint32_t txcl;
+ uint32_t tncl; /* 0x28C transmit total collision counter */
+ uint32_t reserved0290[1];
+ uint32_t tdrp; /* 0x294 transmit drop frame counter */
+ uint32_t tjbr; /* 0x298 transmit jabber frame counter */
+ uint32_t tfcs; /* 0x29C transmit FCS error counter */
+ uint32_t txcf; /* 0x2A0 transmit control frame counter */
+ uint32_t tovr; /* 0x2A4 transmit oversize frame counter */
+ uint32_t tund; /* 0x2A8 transmit undersize frame counter */
+ uint32_t tfrg; /* 0x2AC transmit fragments frame counter */
+ uint32_t car1; /* 0x2B0 carry register one register* */
+ uint32_t car2; /* 0x2B4 carry register two register* */
+ uint32_t cam1; /* 0x2B8 carry register one mask register */
+ uint32_t cam2; /* 0x2BC carry register two mask register */
+ uint32_t reserved02c0[848];
+};
+
+/* struct dtsec_cfg - dTSEC configuration
+ * Transmit half-duplex flow control, under software
+ * control for 10/100-Mbps half-duplex media. If set,
+ * back pressure is applied to media by raising carrier.
+ * halfdup_retransmit:
+ * Number of retransmission attempts following a collision.
+ * If this is exceeded dTSEC aborts transmission due to
+ * excessive collisions. The standard specifies the
+ * attempt limit to be 15.
+ * halfdup_coll_window:
+ * The number of bytes of the frame during which
+ * collisions may occur. The default value of 55
+ * corresponds to the frame byte at the end of the
+ * standard 512-bit slot time window. If collisions are
+ * detected after this byte, the late collision event is
+ * asserted and transmission of current frame is aborted.
+ * rx_drop_bcast:
+ * Discard broadcast frames. If set, all broadcast frames
+ * will be discarded by dTSEC.
+ * rx_short_frm:
+ * Accept short frames. If set, dTSEC will accept frames
+ * of length 14..63 bytes.
+ * rx_len_check:
+ * Length check for received frames. If set, the MAC
+ * checks the frame's length field on receive to ensure it
+ * matches the actual data field length. This only works
+ * for received frames with length field less than 1500.
+ * No check is performed for larger frames.
+ * tx_pad_crc:
+ * Pad and append CRC. If set, the MAC pads all
+ * transmitted short frames and appends a CRC to every
+ * frame regardless of padding requirement.
+ * tx_crc:
+ * Transmission CRC enable. If set, the MAC appends a CRC
+ * to all frames. If frames presented to the MAC have a
+ * valid length and contain a valid CRC, tx_crc should be
+ * reset.
+ * This field is ignored if tx_pad_crc is set.
+ * rx_ctrl_acc:
+ * Control frame accept. If set, this overrides 802.3
+ * standard control frame behavior, and all Ethernet frames
+ * that have an ethertype of 0x8808 are treated as normal
+ * Ethernet frames and passed up to the packet interface on
+ * a DA match. Received pause control frames are passed to
+ * the packet interface only if Rx flow control is also
+ * disabled. See fman_dtsec_handle_rx_pause() function.
+ * tx_pause_time:
+ * Transmit pause time value. This pause value is used as
+ * part of the pause frame to be sent when a transmit pause
+ * frame is initiated. If set to 0 this disables
+ * transmission of pause frames.
+ * rx_preamble:
+ * Receive preamble enable. If set, the MAC recovers the
+ * received Ethernet 7-byte preamble and passes it to the
+ * packet interface at the start of each received frame.
+ * This field should be reset for internal MAC loop-back
+ * mode.
+ * tx_preamble: User defined preamble enable for transmitted frames.
+ * If set, a user-defined preamble must passed to the MAC
+ * and it is transmitted instead of the standard preamble.
+ * preamble_len:
+ * Length, in bytes, of the preamble field preceding each
+ * Ethernet start-of-frame delimiter byte. The default
+ * value of 0x7 should be used in order to guarantee
+ * reliable operation with IEEE 802.3 compliant hardware.
+ * rx_prepend:
+ * Packet alignment padding length. The specified number
+ * of bytes (1-31) of zero padding are inserted before the
+ * start of each received frame. For Ethernet, where
+ * optional preamble extraction is enabled, the padding
+ * appears before the preamble, otherwise the padding
+ * precedes the layer 2 header.
+ *
+ * This structure contains basic dTSEC configuration and must be passed to
+ * fman_dtsec_init() function. A default set of configuration values can be
+ * obtained by calling fman_dtsec_defconfig().
+ */
+struct dtsec_cfg {
+ bool halfdup_on;
+ bool halfdup_alt_backoff_en;
+ bool halfdup_excess_defer;
+ bool halfdup_no_backoff;
+ bool halfdup_bp_no_backoff;
+ uint8_t halfdup_alt_backoff_val;
+ uint16_t halfdup_retransmit;
+ uint16_t halfdup_coll_window;
+ bool rx_drop_bcast;
+ bool rx_short_frm;
+ bool rx_len_check;
+ bool tx_pad_crc;
+ bool tx_crc;
+ bool rx_ctrl_acc;
+ unsigned short tx_pause_time;
+ unsigned short tbipa;
+ bool ptp_tsu_en;
+ bool ptp_exception_en;
+ bool rx_preamble;
+ bool tx_preamble;
+ unsigned char preamble_len;
+ unsigned char rx_prepend;
+ bool loopback;
+ bool rx_time_stamp_en;
+ bool tx_time_stamp_en;
+ bool rx_flow;
+ bool tx_flow;
+ bool rx_group_hash_exd;
+ bool rx_promisc;
+ uint8_t tbi_phy_addr;
+ uint16_t tx_pause_time_extd;
+ uint16_t maximum_frame;
+ uint32_t non_back_to_back_ipg1;
+ uint32_t non_back_to_back_ipg2;
+ uint32_t min_ifg_enforcement;
+ uint32_t back_to_back_ipg;
+ bool wake_on_lan;
+};
+
+/*fman_dtsec_defconfig() - Get default dTSEC configuration
+ *cfg: pointer to configuration structure.
+ *
+ *Call this function to obtain a default set of configuration values for
+ *initializing dTSEC. The user can overwrite any of the values before calling
+ *fman_dtsec_init(), if specific configuration needs to be applied.
+ */
+void fman_dtsec_defconfig(struct dtsec_cfg *cfg);
+
+/*fman_dtsec_init() - Init dTSEC hardware block
+ *regs: Pointer to dTSEC register block
+ *cfg: dTSEC configuration data
+ *iface_mode: dTSEC interface mode, the type of MAC - PHY interface.
+ *iface_speed: 1G or 10G
+ *macaddr: MAC station address to be assigned to the device
+ *fm_rev_maj: major rev number
+ *fm_rev_min: minor rev number
+ *exceptions_mask: initial exceptions mask
+ *This function initializes dTSEC and applies basic configuration.
+ *
+ *dTSEC initialization sequence:
+ *Before enabling Rx/Tx call dtsec_set_address() to set MAC address,
+ *fman_dtsec_adjust_link() to configure interface speed and duplex and finally
+ *dtsec_enable_tx()/dtsec_enable_rx() to start transmission and reception.
+ *
+ *Returns: 0 if successful, an error code otherwise.
+ */
+int fman_dtsec_init(struct dtsec_regs __iomem *regs, struct dtsec_cfg *cfg,
+ enum enet_interface iface_mode,
+ enum enet_speed iface_speed,
+ uint8_t *macaddr, uint8_t fm_rev_maj,
+ uint8_t fm_rev_min, uint32_t exception_mask);
+
+/*fman_dtsec_enable() - Enable dTSEC Tx and Tx
+ *regs: Pointer to dTSEC register block
+ *apply_rx: enable rx side
+ *apply_tx: enable tx side
+ *This function resets Tx and Rx graceful stop bit and enables dTSEC Tx and Rx.
+ */
+void fman_dtsec_enable(struct dtsec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+/*fman_dtsec_disable() - Disable dTSEC Tx and Rx
+ *regs: Pointer to dTSEC register block
+ *apply_rx: disable rx side
+ *apply_tx: disable tx side
+ *This function disables Tx and Rx in dTSEC.
+ */
+void fman_dtsec_disable(struct dtsec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+/*fman_dtsec_get_revision() - Get dTSEC hardware revision
+ *regs: Pointer to dTSEC register block
+ *Returns dtsec_id content
+ *Call this function to obtain the dTSEC hardware version.
+ */
+uint32_t fman_dtsec_get_revision(struct dtsec_regs __iomem *regs);
+
+/*fman_dtsec_set_mac_address() - Set MAC station address
+ *regs: Pointer to dTSEC register block
+ *macaddr: MAC address array
+ *This function sets MAC station address. To enable unicast reception call
+ *this after fman_dtsec_init(). While promiscuous mode is disabled dTSEC will
+ *match the destination address of received unicast frames against this
+ *address.
+ */
+void fman_dtsec_set_mac_address(struct dtsec_regs __iomem *regs,
+ uint8_t *macaddr);
+
+/*fman_dtsec_get_mac_address() - Query MAC station address
+ *regs: Pointer to dTSEC register block
+ *macaddr: MAC address array
+ */
+void fman_dtsec_get_mac_address(struct dtsec_regs __iomem *regs,
+ uint8_t *macaddr);
+
+/*fman_dtsec_set_uc_promisc() - Sets unicast promiscuous mode
+ *regs: Pointer to dTSEC register block
+ *enable: Enable unicast promiscuous mode
+ *Use this function to enable/disable dTSEC L2 address filtering. If the
+ *address filtering is disabled all unicast packets are accepted.
+ *To set dTSEC in promiscuous mode call both fman_dtsec_set_uc_promisc() and
+ *fman_dtsec_set_mc_promisc() to disable filtering for both unicast and
+ *multicast addresses.
+ */
+void fman_dtsec_set_uc_promisc(struct dtsec_regs __iomem *regs, bool enable);
+
+/*fman_dtsec_adjust_link() - Adjust dTSEC speed/duplex settings
+ *regs: Pointer to dTSEC register block
+ *iface_mode: dTSEC interface mode
+ *speed: Link speed
+ *full_dx: True for full-duplex, false for half-duplex.
+ *This function configures the MAC to function and the desired rates. Use it
+ *to configure dTSEC after fman_dtsec_init() and whenever the link speed
+ *changes (for instance following PHY auto-negociation).
+ *Returns: 0 if successful, an error code otherwise.
+ */
+int fman_dtsec_adjust_link(struct dtsec_regs __iomem *regs,
+ enum enet_interface iface_mode,
+ enum enet_speed speed, bool full_dx);
+
+/*fman_dtsec_set_max_frame_len() - Set max frame length
+ *regs: Pointer to dTSEC register block
+ *length: Max frame length.
+ *Sets maximum frame length for received and transmitted frames. Frames that
+ *exceeds this length are truncated.
+ */
+void fman_dtsec_set_max_frame_len(struct dtsec_regs __iomem *regs,
+ uint16_t length);
+
+/*fman_dtsec_get_max_frame_len() - Query max frame length
+ *regs: Pointer to dTSEC register block
+ *Returns: the current value of the maximum frame length.
+ */
+uint16_t fman_dtsec_get_max_frame_len(struct dtsec_regs __iomem *regs);
+
+/*fman_dtsec_handle_rx_pause() - Configure pause frame handling
+ *regs: Pointer to dTSEC register block
+ *en: Enable pause frame handling in dTSEC
+ *If enabled, dTSEC will handle pause frames internally. This must be disabled
+ *if dTSEC is set in half-duplex mode.
+ *If pause frame handling is disabled and &dtsec_cfg.rx_ctrl_acc is set, pause
+ *frames will be transferred to the packet interface just like regular Ethernet
+ *frames.
+ */
+void fman_dtsec_handle_rx_pause(struct dtsec_regs __iomem *regs, bool en);
+
+/*fman_dtsec_set_tx_pause_frames() - Configure Tx pause time
+ *regs: Pointer to dTSEC register block
+ *time: Time value included in pause frames
+ *Call this function to set the time value used in transmitted pause frames.
+ *If time is 0, transmission of pause frames is disabled
+ */
+void fman_dtsec_set_tx_pause_frames(struct dtsec_regs __iomem *regs,
+ uint16_t time);
+
+/*fman_dtsec_ack_event() - Acknowledge handled events
+ *regs: Pointer to dTSEC register block
+ *ev_mask: Events to acknowledge
+ *After handling events signaled by dTSEC in either polling or interrupt mode,
+ *call this function to reset the associated status bits in dTSEC event
+ *register.
+ */
+void fman_dtsec_ack_event(struct dtsec_regs __iomem *regs, uint32_t ev_mask);
+
+/*fman_dtsec_get_event() - Returns currently asserted events
+ *regs: Pointer to dTSEC register block
+ *ev_mask: Mask of relevant events
+ *Call this function to obtain a bit-mask of events that are currently asserted
+ *in dTSEC, taken from IEVENT register.
+ *Returns: a bit-mask of events asserted in dTSEC.
+ */
+uint32_t fman_dtsec_get_event(struct dtsec_regs __iomem *regs,
+ uint32_t ev_mask);
+
+/*fman_dtsec_get_interrupt_mask() - Returns a bit-mask of enabled interrupts
+ *regs: Pointer to dTSEC register block
+ *Call this function to obtain a bit-mask of enabled interrupts
+ *in dTSEC, taken from IMASK register.
+ *Returns: a bit-mask of enabled interrupts in dTSEC.
+ */
+uint32_t fman_dtsec_get_interrupt_mask(struct dtsec_regs __iomem *regs);
+
+void fman_dtsec_enable_tmr_interrupt(struct dtsec_regs __iomem *regs);
+
+void fman_dtsec_disable_tmr_interrupt(struct dtsec_regs __iomem *regs);
+
+/*fman_dtsec_disable_interrupt() - Disables interrupts for the specified events
+ *regs: Pointer to dTSEC register block
+ *ev_mask: Mask of relevant events
+ *Call this function to disable interrupts in dTSEC for the specified events.
+ *To enable interrupts use fman_dtsec_enable_interrupt().
+ */
+void fman_dtsec_disable_interrupt(struct dtsec_regs __iomem *regs,
+ uint32_t ev_mask);
+
+/*fman_dtsec_enable_interrupt() - Enable interrupts for the specified events
+ *regs: Pointer to dTSEC register block
+ *ev_mask: Mask of relevant events
+ *Call this function to enable interrupts in dTSEC for the specified events.
+ *To disable interrupts use fman_dtsec_disable_interrupt().
+ */
+void fman_dtsec_enable_interrupt(struct dtsec_regs __iomem *regs,
+ uint32_t ev_mask);
+
+/*fman_dtsec_set_bucket() - Enables/disables a filter bucket
+ *regs: Pointer to dTSEC register block
+ *bucket: Bucket index
+ *enable: true/false to enable/disable this bucket
+ *This function enables or disables the specified bucket. Enabling a bucket
+ *associated with an address configures dTSEC to accept received packets
+ *with that destination address.
+ *Multiple addresses may be associated with the same bucket. Disabling a
+ *bucket will affect all addresses associated with that bucket. A bucket that
+ *is enabled requires further filtering and verification in the upper layers
+ */
+void fman_dtsec_set_bucket(struct dtsec_regs __iomem *regs, int bucket,
+ bool enable);
+
+/*fman_dtsec_set_mc_promisc() - Set multicast promiscuous mode
+ *regs: Pointer to dTSEC register block
+ *enable: Enable multicast promiscuous mode
+ *Call this to enable/disable L2 address filtering for multicast packets.
+ */
+void fman_dtsec_set_mc_promisc(struct dtsec_regs __iomem *regs, bool enable);
+
+/*fman_dtsec_get_clear_carry_regs() - Read and clear carry bits
+ * (CAR1-2 registers)
+ *regs: Pointer to dTSEC register block
+ *car1: car1 register value
+ *car2: car2 register value
+ *When set, the carry bits signal that an overflow occurred on the
+ *corresponding counters.
+ *Note that the carry bits (CAR1-2 registers) will assert the
+ *%DTSEC_IEVENT_MSRO interrupt if unmasked (via CAM1-2 regs).
+ *Returns: true if overflow occurred, otherwise - false
+ */
+bool fman_dtsec_get_clear_carry_regs(struct dtsec_regs __iomem *regs,
+ uint32_t *car1, uint32_t *car2);
+
+uint32_t fman_dtsec_check_and_clear_tmr_event(struct dtsec_regs __iomem *regs);
+
+void fman_dtsec_start_tx(struct dtsec_regs __iomem *regs);
+void fman_dtsec_start_rx(struct dtsec_regs __iomem *regs);
+void fman_dtsec_stop_tx(struct dtsec_regs __iomem *regs);
+void fman_dtsec_stop_rx(struct dtsec_regs __iomem *regs);
+uint32_t fman_dtsec_get_rctrl(struct dtsec_regs __iomem *regs);
+
+#endif /* __FSL_FMAN_DTSEC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h
new file mode 100644
index 0000000..4425910
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_DTSEC_MII_ACC_H
+#define __FSL_FMAN_DTSEC_MII_ACC_H
+
+#include "common/general.h"
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RESET_MGMT 0x80000000
+#define MIIMCFG_MGNTCLK_MASK 0x00000007
+#define MIIMCFG_MGNTCLK_SHIFT 0
+
+/* MII Management Command Register */
+#define MIIMCOM_SCAN_CYCLE 0x00000002
+#define MIIMCOM_READ_CYCLE 0x00000001
+
+/* MII Management Address Register */
+#define MIIMADD_PHY_ADDR_SHIFT 8
+#define MIIMADD_PHY_ADDR_MASK 0x00001f00
+
+#define MIIMADD_REG_ADDR_SHIFT 0
+#define MIIMADD_REG_ADDR_MASK 0x0000001f
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY 0x00000001
+
+/* PHY Control Register */
+#define PHY_CR_PHY_RESET 0x8000
+#define PHY_CR_LOOPBACK 0x4000
+#define PHY_CR_SPEED0 0x2000
+#define PHY_CR_ANE 0x1000
+#define PHY_CR_RESET_AN 0x0200
+#define PHY_CR_FULLDUPLEX 0x0100
+#define PHY_CR_SPEED1 0x0040
+
+#define PHY_TBICON_SRESET 0x8000
+#define PHY_TBICON_SPEED2 0x0020
+#define PHY_TBICON_CLK_SEL 0x0020
+#define PHY_TBIANA_SGMII 0x4001
+#define PHY_TBIANA_1000X 0x01a0
+/* register map */
+
+/* MII Configuration Control Memory Map Registers */
+struct dtsec_mii_reg {
+ uint32_t reserved1[72];
+ uint32_t miimcfg; /* MII Mgmt:configuration */
+ uint32_t miimcom; /* MII Mgmt:command */
+ uint32_t miimadd; /* MII Mgmt:address */
+ uint32_t miimcon; /* MII Mgmt:control 3 */
+ uint32_t miimstat; /* MII Mgmt:status */
+ uint32_t miimind; /* MII Mgmt:indicators */
+};
+
+/* dTSEC MII API */
+
+/* functions to access the mii registers for phy configuration.
+ * this functionality may not be available for all dtsecs in the system.
+ * consult the reference manual for details
+ **/
+void fman_dtsec_mii_reset(struct dtsec_mii_reg __iomem *regs);
+/* frequency is in MHz.
+ * note that dtsec clock is 1/2 of fman clock
+ **/
+void fman_dtsec_mii_init(struct dtsec_mii_reg __iomem *regs,
+ uint16_t dtsec_freq);
+int fman_dtsec_mii_write_reg(struct dtsec_mii_reg __iomem *regs,
+ uint8_t addr,
+ uint8_t reg, uint16_t data, uint16_t dtsec_freq);
+
+int fman_dtsec_mii_read_reg(struct dtsec_mii_reg __iomem *regs,
+ uint8_t addr,
+ uint8_t reg, uint16_t *data, uint16_t dtsec_freq);
+
+#endif /* __FSL_FMAN_DTSEC_MII_ACC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
new file mode 100644
index 0000000..c589025
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
@@ -0,0 +1,453 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_MEMAC_H
+#define __FSL_FMAN_MEMAC_H
+
+#include "common/general.h"
+#include "fsl_enet.h"
+/* Num of additional exact match MAC adr regs */
+#define MEMAC_NUM_OF_PADDRS 7
+
+/* Control and Configuration Register (COMMAND_CONFIG) */
+/* 00 Magic Packet detection */
+#define CMD_CFG_MG 0x80000000
+/* 07 Rx low power indication */
+#define CMD_CFG_REG_LOWP_RXETY 0x01000000
+/* 08 Tx Low Power Idle Enable */
+#define CMD_CFG_TX_LOWP_ENA 0x00800000
+/* 10 Disable SFD check */
+#define CMD_CFG_SFD_ANY 0x00200000
+/* 12 Enable PFC */
+#define CMD_CFG_PFC_MODE 0x00080000
+/* 14 Payload length check disable */
+#define CMD_CFG_NO_LEN_CHK 0x00020000
+/* 15 Force idle generation */
+#define CMD_CFG_SEND_IDLE 0x00010000
+/* 18 Control frame rx enable */
+#define CMD_CFG_CNT_FRM_EN 0x00002000
+/* 19 S/W Reset, self clearing bit */
+#define CMD_CFG_SW_RESET 0x00001000
+/* 20 Enable Tx padding of frames */
+#define CMD_CFG_TX_PAD_EN 0x00000800
+/* 21 XGMII/GMII loopback enable */
+#define CMD_CFG_LOOPBACK_EN 0x00000400
+/* 22 Tx source MAC addr insertion */
+#define CMD_CFG_TX_ADDR_INS 0x00000200
+/* 23 Ignore Pause frame quanta */
+#define CMD_CFG_PAUSE_IGNORE 0x00000100
+/* 24 Terminate/frwd Pause frames */
+#define CMD_CFG_PAUSE_FWD 0x00000080
+/* 25 Terminate/frwd CRC of frames */
+#define CMD_CFG_CRC_FWD 0x00000040
+/* 26 Frame padding removal */
+#define CMD_CFG_PAD_EN 0x00000020
+/* 27 Promiscuous operation enable */
+#define CMD_CFG_PROMIS_EN 0x00000010
+/* 28 WAN mode enable */
+#define CMD_CFG_WAN_MODE 0x00000008
+/* 30 MAC receive path enable */
+#define CMD_CFG_RX_EN 0x00000002
+/* 31 MAC transmit path enable */
+#define CMD_CFG_TX_EN 0x00000001
+
+/* Transmit FIFO Sections Register (TX_FIFO_SECTIONS) */
+#define TX_FIFO_SECTIONS_TX_EMPTY_MASK 0xFFFF0000
+#define TX_FIFO_SECTIONS_TX_AVAIL_MASK 0x0000FFFF
+#define TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G 0x00400000
+#define TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G 0x00100000
+#define TX_FIFO_SECTIONS_TX_EMPTY_PFC_10G 0x00360000
+#define TX_FIFO_SECTIONS_TX_EMPTY_PFC_1G 0x00040000
+#define TX_FIFO_SECTIONS_TX_AVAIL_10G 0x00000019
+#define TX_FIFO_SECTIONS_TX_AVAIL_1G 0x00000020
+#define TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G 0x00000060
+
+#define GET_TX_EMPTY_DEFAULT_VALUE(_val) \
+do { \
+ _val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK; \
+ ((_val == TX_FIFO_SECTIONS_TX_AVAIL_10G) ? \
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G) :\
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G));\
+} while (0)
+
+#define GET_TX_EMPTY_PFC_VALUE(_val) \
+do { \
+ _val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK; \
+ ((_val == TX_FIFO_SECTIONS_TX_AVAIL_10G) ? \
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_PFC_10G) : \
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_PFC_1G)); \
+} while (0)
+
+/* Interface Mode Register (IF_MODE) */
+/* 30-31 Mask on i/f mode bits */
+#define IF_MODE_MASK 0x00000003
+/* 30-31 XGMII (10G) interface */
+#define IF_MODE_XGMII 0x00000000
+/* 30-31 GMII (1G) interface */
+#define IF_MODE_GMII 0x00000002
+#define IF_MODE_RGMII 0x00000004
+#define IF_MODE_RGMII_AUTO 0x00008000
+#define IF_MODE_RGMII_1000 0x00004000 /* 10 - 1000Mbps RGMII */
+#define IF_MODE_RGMII_100 0x00000000 /* 00 - 100Mbps RGMII */
+#define IF_MODE_RGMII_10 0x00002000 /* 01 - 10Mbps RGMII */
+#define IF_MODE_RGMII_SP_MASK 0x00006000 /* Setsp mask bits */
+#define IF_MODE_RGMII_FD 0x00001000 /* Full duplex RGMII */
+#define IF_MODE_HD 0x00000040 /* Half duplex operation */
+
+/* Hash table Control Register (HASHTABLE_CTRL) */
+#define HASH_CTRL_MCAST_SHIFT 26
+/* 23 Mcast frame rx for hash */
+#define HASH_CTRL_MCAST_EN 0x00000100
+/* 26-31 Hash table address code */
+#define HASH_CTRL_ADDR_MASK 0x0000003F
+/* MAC mcast indication */
+#define GROUP_ADDRESS 0x0000010000000000LL
+#define HASH_TABLE_SIZE 64 /* Hash tbl size */
+
+/* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
+#define MEMAC_TX_IPG_LENGTH_MASK 0x0000003F
+
+/* Statistics Configuration Register (STATN_CONFIG) */
+#define STATS_CFG_CLR 0x00000004 /* 29 Reset all counters */
+#define STATS_CFG_CLR_ON_RD 0x00000002 /* 30 Clear on read */
+/* 31 Saturate at the maximum val */
+#define STATS_CFG_SATURATE 0x00000001
+
+/* Interrupt Mask Register (IMASK) */
+/* 1 Magic pkt detect indication */
+#define MEMAC_IMASK_MGI 0x40000000
+/* 2 Timestamp FIFO ECC error evnt */
+#define MEMAC_IMASK_TSECC_ER 0x20000000
+/* 6 Transmit frame ECC error evnt */
+#define MEMAC_IMASK_TECC_ER 0x02000000
+/* 7 Receive frame ECC error evnt */
+#define MEMAC_IMASK_RECC_ER 0x01000000
+
+#define MEMAC_ALL_ERRS_IMASK \
+ ((uint32_t)(MEMAC_IMASK_TSECC_ER | \
+ MEMAC_IMASK_TECC_ER | \
+ MEMAC_IMASK_RECC_ER | \
+ MEMAC_IMASK_MGI))
+
+/* PCS (XG). Link sync (G) */
+#define MEMAC_IEVNT_PCS 0x80000000
+/* Auto-negotiation */
+#define MEMAC_IEVNT_AN 0x40000000
+/* Link Training/New page */
+#define MEMAC_IEVNT_LT 0x20000000
+/* Magic pkt detection */
+#define MEMAC_IEVNT_MGI 0x00004000
+/* Timestamp FIFO ECC error */
+#define MEMAC_IEVNT_TS_ECC_ER 0x00002000
+/* Rx FIFO overflow */
+#define MEMAC_IEVNT_RX_FIFO_OVFL 0x00001000
+/* Tx FIFO underflow */
+#define MEMAC_IEVNT_TX_FIFO_UNFL 0x00000800
+/* Tx FIFO overflow */
+#define MEMAC_IEVNT_TX_FIFO_OVFL 0x00000400
+/* Tx frame ECC error */
+#define MEMAC_IEVNT_TX_ECC_ER 0x00000200
+/* Rx frame ECC error */
+#define MEMAC_IEVNT_RX_ECC_ER 0x00000100
+/* Link Interruption flt */
+#define MEMAC_IEVNT_LI_FAULT 0x00000080
+/* Rx FIFO empty */
+#define MEMAC_IEVNT_RX_EMPTY 0x00000040
+/* Tx FIFO empty */
+#define MEMAC_IEVNT_TX_EMPTY 0x00000020
+/* Low Power Idle */
+#define MEMAC_IEVNT_RX_LOWP 0x00000010
+/* Phy loss of signal */
+#define MEMAC_IEVNT_PHY_LOS 0x00000004
+/* Remote fault (XGMII) */
+#define MEMAC_IEVNT_REM_FAULT 0x00000002
+/* Local fault (XGMII) */
+#define MEMAC_IEVNT_LOC_FAULT 0x00000001
+
+#define DEFAULT_PAUSE_QUANTA 0xf000
+#define DEFAULT_FRAME_LENGTH 0x600
+#define DEFAULT_TX_IPG_LENGTH 12
+
+/**
+ * memory map
+ **/
+
+struct mac_addr {
+ /* Lower 32 bits of 48-bit MAC address */
+ uint32_t mac_addr_l;
+ /* Upper 16 bits of 48-bit MAC address */
+ uint32_t mac_addr_u;
+};
+
+struct memac_regs {
+ /* General Control and Status */
+ uint32_t res0000[2];
+ /* 0x008 Ctrl and cfg */
+ uint32_t command_config;
+ /* 0x00C-0x010 MAC_ADDR_0...1 */
+ struct mac_addr mac_addr0;
+ /* 0x014 Max frame length */
+ uint32_t maxfrm;
+ uint32_t res0018[1];
+ /* Receive FIFO configuration reg */
+ uint32_t rx_fifo_sections;
+ /* Transmit FIFO configuration reg */
+ uint32_t tx_fifo_sections;
+ uint32_t res0024[2];
+ /* 0x02C Hash table control */
+ uint32_t hashtable_ctrl;
+ uint32_t res0030[4];
+ /* 0x040 Interrupt event */
+ uint32_t ievent;
+ /* 0x044 Transmitter inter-packet-gap */
+ uint32_t tx_ipg_length;
+ uint32_t res0048;
+ /* 0x04C Interrupt mask */
+ uint32_t imask;
+ uint32_t res0050;
+ /* 0x054 Pause quanta */
+ uint32_t pause_quanta[4];
+ /* 0x064 Pause quanta threshold */
+ uint32_t pause_thresh[4];
+ /* 0x074 Receive pause status */
+ uint32_t rx_pause_status;
+ uint32_t res0078[2];
+ /* 0x80-0x0B4 mac padr */
+ struct mac_addr mac_addr[MEMAC_NUM_OF_PADDRS];
+ /* 0x0B8 Low Power Wakeup Timer */
+ uint32_t lpwake_timer;
+ /* 0x0BC Transmit EEE Low Power Timer */
+ uint32_t sleep_timer;
+ uint32_t res00c0[8];
+ /* 0x0E0 Statistics configuration */
+ uint32_t statn_config;
+ uint32_t res00e4[7];
+ /* Rx Statistics Counter */
+ uint32_t reoct_l;
+ uint32_t reoct_u;
+ uint32_t roct_l;
+ uint32_t roct_u;
+ uint32_t raln_l;
+ uint32_t raln_u;
+ uint32_t rxpf_l;
+ uint32_t rxpf_u;
+ uint32_t rfrm_l;
+ uint32_t rfrm_u;
+ uint32_t rfcs_l;
+ uint32_t rfcs_u;
+ uint32_t rvlan_l;
+ uint32_t rvlan_u;
+ uint32_t rerr_l;
+ uint32_t rerr_u;
+ uint32_t ruca_l;
+ uint32_t ruca_u;
+ uint32_t rmca_l;
+ uint32_t rmca_u;
+ uint32_t rbca_l;
+ uint32_t rbca_u;
+ uint32_t rdrp_l;
+ uint32_t rdrp_u;
+ uint32_t rpkt_l;
+ uint32_t rpkt_u;
+ uint32_t rund_l;
+ uint32_t rund_u;
+ uint32_t r64_l;
+ uint32_t r64_u;
+ uint32_t r127_l;
+ uint32_t r127_u;
+ uint32_t r255_l;
+ uint32_t r255_u;
+ uint32_t r511_l;
+ uint32_t r511_u;
+ uint32_t r1023_l;
+ uint32_t r1023_u;
+ uint32_t r1518_l;
+ uint32_t r1518_u;
+ uint32_t r1519x_l;
+ uint32_t r1519x_u;
+ uint32_t rovr_l;
+ uint32_t rovr_u;
+ uint32_t rjbr_l;
+ uint32_t rjbr_u;
+ uint32_t rfrg_l;
+ uint32_t rfrg_u;
+ uint32_t rcnp_l;
+ uint32_t rcnp_u;
+ uint32_t rdrntp_l;
+ uint32_t rdrntp_u;
+ uint32_t res01d0[12];
+ /* Tx Statistics Counter */
+ uint32_t teoct_l;
+ uint32_t teoct_u;
+ uint32_t toct_l;
+ uint32_t toct_u;
+ uint32_t res0210[2];
+ uint32_t txpf_l;
+ uint32_t txpf_u;
+ uint32_t tfrm_l;
+ uint32_t tfrm_u;
+ uint32_t tfcs_l;
+ uint32_t tfcs_u;
+ uint32_t tvlan_l;
+ uint32_t tvlan_u;
+ uint32_t terr_l;
+ uint32_t terr_u;
+ uint32_t tuca_l;
+ uint32_t tuca_u;
+ uint32_t tmca_l;
+ uint32_t tmca_u;
+ uint32_t tbca_l;
+ uint32_t tbca_u;
+ uint32_t res0258[2];
+ uint32_t tpkt_l;
+ uint32_t tpkt_u;
+ uint32_t tund_l;
+ uint32_t tund_u;
+ uint32_t t64_l;
+ uint32_t t64_u;
+ uint32_t t127_l;
+ uint32_t t127_u;
+ uint32_t t255_l;
+ uint32_t t255_u;
+ uint32_t t511_l;
+ uint32_t t511_u;
+ uint32_t t1023_l;
+ uint32_t t1023_u;
+ uint32_t t1518_l;
+ uint32_t t1518_u;
+ uint32_t t1519x_l;
+ uint32_t t1519x_u;
+ uint32_t res02a8[6];
+ uint32_t tcnp_l;
+ uint32_t tcnp_u;
+ uint32_t res02c8[14];
+ /* Line Interface Control */
+ uint32_t if_mode; /* 0x300 Interface Mode Control */
+ uint32_t if_status; /* 0x304 Interface Status */
+ uint32_t res0308[14];
+ /* HiGig/2 */
+ uint32_t hg_config; /* 0x340 Control and cfg */
+ uint32_t res0344[3];
+ uint32_t hg_pause_quanta; /* 0x350 Pause quanta */
+ uint32_t res0354[3];
+ uint32_t hg_pause_thresh; /* 0x360 Pause quanta threshold */
+ uint32_t res0364[3];
+ uint32_t hgrx_pause_status; /* 0x370 Receive pause status */
+ uint32_t hg_fifos_status; /* 0x374 fifos status */
+ uint32_t rhm; /* 0x378 rx messages counter */
+ uint32_t thm; /* 0x37C tx messages counter */
+};
+
+struct memac_cfg {
+ bool reset_on_init;
+ bool rx_error_discard;
+ bool pause_ignore;
+ bool pause_forward_enable;
+ bool no_length_check_enable;
+ bool cmd_frame_enable;
+ bool send_idle_enable;
+ bool wan_mode_enable;
+ bool promiscuous_mode_enable;
+ bool tx_addr_ins_enable;
+ bool loopback_enable;
+ bool lgth_check_nostdr;
+ bool time_stamp_enable;
+ bool pad_enable;
+ bool phy_tx_ena_on;
+ bool rx_sfd_any;
+ bool rx_pbl_fwd;
+ bool tx_pbl_fwd;
+ bool debug_mode;
+ bool wake_on_lan;
+ uint16_t max_frame_length;
+ uint16_t pause_quanta;
+ uint32_t tx_ipg_length;
+};
+
+/**
+*fman_memac_defconfig() - Get default MEMAC configuration
+*@cfg: pointer to configuration structure.
+ *
+*Call this function to obtain a default set of configuration values for
+*initializing MEMAC. The user can overwrite any of the values before calling
+*fman_memac_init(), if specific configuration needs to be applied.
+ */
+void fman_memac_defconfig(struct memac_cfg *cfg);
+
+int fman_memac_init(struct memac_regs __iomem *regs,
+ struct memac_cfg *cfg,
+ enum enet_interface enet_interface,
+ enum enet_speed enet_speed,
+ bool slow_10g_if,
+ uint32_t exceptions);
+
+void fman_memac_enable(struct memac_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+void fman_memac_disable(struct memac_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+void fman_memac_set_promiscuous(struct memac_regs __iomem *regs, bool val);
+
+void fman_memac_add_addr_in_paddr(struct memac_regs __iomem *regs,
+ uint8_t *adr, uint8_t paddr_num);
+
+void fman_memac_clear_addr_in_paddr(struct memac_regs __iomem *regs,
+ uint8_t paddr_num);
+
+void fman_memac_set_tx_pause_frames(struct memac_regs __iomem *regs,
+ uint8_t priority, uint16_t pause_time,
+ uint16_t thresh_time);
+
+uint16_t fman_memac_get_max_frame_len(struct memac_regs __iomem *regs);
+
+void fman_memac_set_exception(struct memac_regs __iomem *regs, uint32_t val,
+ bool enable);
+
+void fman_memac_reset(struct memac_regs __iomem *regs);
+
+void fman_memac_set_hash_table(struct memac_regs __iomem *regs, uint32_t val);
+
+void fman_memac_set_rx_ignore_pause_frames(struct memac_regs __iomem *regs,
+ bool enable);
+
+uint32_t fman_memac_get_event(struct memac_regs __iomem *regs,
+ uint32_t ev_mask);
+
+void fman_memac_ack_event(struct memac_regs __iomem *regs, uint32_t ev_mask);
+
+uint32_t fman_memac_get_interrupt_mask(struct memac_regs __iomem *regs);
+
+void fman_memac_adjust_link(struct memac_regs __iomem *regs,
+ enum enet_interface iface_mode,
+ enum enet_speed speed, bool full_dx);
+
+#endif /*__FSL_FMAN_MEMAC_H*/
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h
new file mode 100644
index 0000000..ad18d6f
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_MEMAC_MII_ACC_H
+#define __FSL_FMAN_MEMAC_MII_ACC_H
+
+#include "common/general.h"
+#include "fsl_enet.h"
+/* MII Management Registers */
+#define MDIO_CFG_CLK_DIV_MASK 0x0080ff80
+#define MDIO_CFG_HOLD_MASK 0x0000001c
+#define MDIO_CFG_ENC45 0x00000040
+#define MDIO_CFG_READ_ERR 0x00000002
+#define MDIO_CFG_BSY 0x00000001
+
+#define MDIO_CTL_PHY_ADDR_SHIFT 5
+#define MDIO_CTL_READ 0x00008000
+
+#define MDIO_DATA_BSY 0x80000000
+
+/*MEMAC Internal PHY Registers - SGMII */
+#define PHY_SGMII_CR_PHY_RESET 0x8000
+#define PHY_SGMII_CR_RESET_AN 0x0200
+#define PHY_SGMII_CR_DEF_VAL 0x1140
+#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
+#define PHY_SGMII_DEV_ABILITY_1000X 0x01A0
+#define PHY_SGMII_IF_MODE_AN 0x0002
+#define PHY_SGMII_IF_MODE_SGMII 0x0001
+#define PHY_SGMII_IF_MODE_1000X 0x0000
+
+/*----------------------------------------------------*/
+/* MII Configuration Control Memory Map Registers */
+/*----------------------------------------------------*/
+struct memac_mii_access_mem_map {
+ uint32_t mdio_cfg; /* 0x030 */
+ uint32_t mdio_ctrl; /* 0x034 */
+ uint32_t mdio_data; /* 0x038 */
+ uint32_t mdio_addr; /* 0x03c */
+};
+
+int fman_memac_mii_read_phy_reg(struct memac_mii_access_mem_map __iomem
+ *mii_regs, uint8_t phy_addr, uint8_t reg,
+ uint16_t *data, enum enet_speed enet_speed);
+int fman_memac_mii_write_phy_reg(struct memac_mii_access_mem_map __iomem
+ *mii_regs, uint8_t phy_addr, uint8_t reg,
+ uint16_t data, enum enet_speed enet_speed);
+
+#endif /* __MAC_API_MEMAC_MII_ACC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h
new file mode 100644
index 0000000..6f8d440
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_TGEC_H
+#define __FSL_FMAN_TGEC_H
+
+#include "common/general.h"
+#include "fsl_enet.h"
+
+/* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
+#define TGEC_TX_IPG_LENGTH_MASK 0x000003ff
+
+/* Command and Configuration Register (COMMAND_CONFIG) */
+#define CMD_CFG_EN_TIMESTAMP 0x00100000
+#define CMD_CFG_TX_ADDR_INS_SEL 0x00080000
+#define CMD_CFG_NO_LEN_CHK 0x00020000
+#define CMD_CFG_SEND_IDLE 0x00010000
+#define CMD_CFG_RX_ER_DISC 0x00004000
+#define CMD_CFG_CMD_FRM_EN 0x00002000
+#define CMD_CFG_STAT_CLR 0x00001000
+#define CMD_CFG_LOOPBACK_EN 0x00000400
+#define CMD_CFG_TX_ADDR_INS 0x00000200
+#define CMD_CFG_PAUSE_IGNORE 0x00000100
+#define CMD_CFG_PAUSE_FWD 0x00000080
+#define CMD_CFG_PROMIS_EN 0x00000010
+#define CMD_CFG_WAN_MODE 0x00000008
+#define CMD_CFG_RX_EN 0x00000002
+#define CMD_CFG_TX_EN 0x00000001
+
+/* Interrupt Mask Register (IMASK) */
+#define TGEC_IMASK_MDIO_SCAN_EVENT 0x00010000
+#define TGEC_IMASK_MDIO_CMD_CMPL 0x00008000
+#define TGEC_IMASK_REM_FAULT 0x00004000
+#define TGEC_IMASK_LOC_FAULT 0x00002000
+#define TGEC_IMASK_TX_ECC_ER 0x00001000
+#define TGEC_IMASK_TX_FIFO_UNFL 0x00000800
+#define TGEC_IMASK_TX_FIFO_OVFL 0x00000400
+#define TGEC_IMASK_TX_ER 0x00000200
+#define TGEC_IMASK_RX_FIFO_OVFL 0x00000100
+#define TGEC_IMASK_RX_ECC_ER 0x00000080
+#define TGEC_IMASK_RX_JAB_FRM 0x00000040
+#define TGEC_IMASK_RX_OVRSZ_FRM 0x00000020
+#define TGEC_IMASK_RX_RUNT_FRM 0x00000010
+#define TGEC_IMASK_RX_FRAG_FRM 0x00000008
+#define TGEC_IMASK_RX_LEN_ER 0x00000004
+#define TGEC_IMASK_RX_CRC_ER 0x00000002
+#define TGEC_IMASK_RX_ALIGN_ER 0x00000001
+
+#define TGEC_EVENTS_MASK \
+ ((uint32_t)(TGEC_IMASK_MDIO_SCAN_EVENT | \
+ TGEC_IMASK_MDIO_CMD_CMPL | \
+ TGEC_IMASK_REM_FAULT | \
+ TGEC_IMASK_LOC_FAULT | \
+ TGEC_IMASK_TX_ECC_ER | \
+ TGEC_IMASK_TX_FIFO_UNFL | \
+ TGEC_IMASK_TX_FIFO_OVFL | \
+ TGEC_IMASK_TX_ER | \
+ TGEC_IMASK_RX_FIFO_OVFL | \
+ TGEC_IMASK_RX_ECC_ER | \
+ TGEC_IMASK_RX_JAB_FRM | \
+ TGEC_IMASK_RX_OVRSZ_FRM | \
+ TGEC_IMASK_RX_RUNT_FRM | \
+ TGEC_IMASK_RX_FRAG_FRM | \
+ TGEC_IMASK_RX_LEN_ER | \
+ TGEC_IMASK_RX_CRC_ER | \
+ TGEC_IMASK_RX_ALIGN_ER))
+
+/* Hashtable Control Register (HASHTABLE_CTRL) */
+#define TGEC_HASH_MCAST_SHIFT 23
+#define TGEC_HASH_MCAST_EN 0x00000200
+#define TGEC_HASH_ADR_MSK 0x000001ff
+
+#define DEFAULT_WAN_MODE_ENABLE false
+#define DEFAULT_PROMISCUOUS_MODE_ENABLE false
+#define DEFAULT_PAUSE_FORWARD_ENABLE false
+#define DEFAULT_PAUSE_IGNORE false
+#define DEFAULT_TX_ADDR_INS_ENABLE false
+#define DEFAULT_LOOPBACK_ENABLE false
+#define DEFAULT_CMD_FRAME_ENABLE false
+#define DEFAULT_RX_ERROR_DISCARD false
+#define DEFAULT_SEND_IDLE_ENABLE false
+#define DEFAULT_NO_LENGTH_CHECK_ENABLE true
+#define DEFAULT_LGTH_CHECK_NOSTDR false
+#define DEFAULT_TIME_STAMP_ENABLE false
+#define DEFAULT_TX_IPG_LENGTH 12
+#define DEFAULT_MAX_FRAME_LENGTH 0x600
+#define DEFAULT_PAUSE_QUANT 0xf000
+
+/**
+ * 10G memory map
+ **/
+struct tgec_regs {
+ uint32_t tgec_id; /* 0x000 Controller ID */
+ uint32_t reserved001[1]; /* 0x004 */
+ uint32_t command_config; /* 0x008 Control and configuration */
+ uint32_t mac_addr_0; /* 0x00c Lower 32 bits of the MAC adr */
+ uint32_t mac_addr_1; /* 0x010 Upper 16 bits of the MAC adr */
+ uint32_t maxfrm; /* 0x014 Maximum frame length */
+ uint32_t pause_quant; /* 0x018 Pause quanta */
+ uint32_t rx_fifo_sections; /* 0x01c */
+ uint32_t tx_fifo_sections; /* 0x020 */
+ uint32_t rx_fifo_almost_f_e; /* 0x024 */
+ uint32_t tx_fifo_almost_f_e; /* 0x028 */
+ uint32_t hashtable_ctrl; /* 0x02c Hash table control */
+ uint32_t mdio_cfg_status; /* 0x030 */
+ uint32_t mdio_command; /* 0x034 */
+ uint32_t mdio_data; /* 0x038 */
+ uint32_t mdio_regaddr; /* 0x03c */
+ uint32_t status; /* 0x040 */
+ uint32_t tx_ipg_len; /* 0x044 Transmitter inter-packet-gap */
+ uint32_t mac_addr_2; /* 0x048 Lower 32 bits of 2nd MAC adr */
+ uint32_t mac_addr_3; /* 0x04c Upper 16 bits of 2nd MAC adr */
+ uint32_t rx_fifo_ptr_rd; /* 0x050 */
+ uint32_t rx_fifo_ptr_wr; /* 0x054 */
+ uint32_t tx_fifo_ptr_rd; /* 0x058 */
+ uint32_t tx_fifo_ptr_wr; /* 0x05c */
+ uint32_t imask; /* 0x060 Interrupt mask */
+ uint32_t ievent; /* 0x064 Interrupt event */
+ uint32_t udp_port; /* 0x068 Defines a UDP Port number */
+ uint32_t type_1588v2; /* 0x06c Type field for 1588v2 */
+ uint32_t reserved070[4]; /* 0x070 */
+ /*10Ge Statistics Counter */
+ uint32_t tfrm_u; /* 80 aFramesTransmittedOK */
+ uint32_t tfrm_l; /* 84 aFramesTransmittedOK */
+ uint32_t rfrm_u; /* 88 aFramesReceivedOK */
+ uint32_t rfrm_l; /* 8c aFramesReceivedOK */
+ uint32_t rfcs_u; /* 90 aFrameCheckSequenceErrors */
+ uint32_t rfcs_l; /* 94 aFrameCheckSequenceErrors */
+ uint32_t raln_u; /* 98 aAlignmentErrors */
+ uint32_t raln_l; /* 9c aAlignmentErrors */
+ uint32_t txpf_u; /* A0 aPAUSEMACCtrlFramesTransmitted */
+ uint32_t txpf_l; /* A4 aPAUSEMACCtrlFramesTransmitted */
+ uint32_t rxpf_u; /* A8 aPAUSEMACCtrlFramesReceived */
+ uint32_t rxpf_l; /* Ac aPAUSEMACCtrlFramesReceived */
+ uint32_t rlong_u; /* B0 aFrameTooLongErrors */
+ uint32_t rlong_l; /* B4 aFrameTooLongErrors */
+ uint32_t rflr_u; /* B8 aInRangeLengthErrors */
+ uint32_t rflr_l; /* Bc aInRangeLengthErrors */
+ uint32_t tvlan_u; /* C0 VLANTransmittedOK */
+ uint32_t tvlan_l; /* C4 VLANTransmittedOK */
+ uint32_t rvlan_u; /* C8 VLANReceivedOK */
+ uint32_t rvlan_l; /* Cc VLANReceivedOK */
+ uint32_t toct_u; /* D0 if_out_octets */
+ uint32_t toct_l; /* D4 if_out_octets */
+ uint32_t roct_u; /* D8 if_in_octets */
+ uint32_t roct_l; /* Dc if_in_octets */
+ uint32_t ruca_u; /* E0 if_in_ucast_pkts */
+ uint32_t ruca_l; /* E4 if_in_ucast_pkts */
+ uint32_t rmca_u; /* E8 ifInMulticastPkts */
+ uint32_t rmca_l; /* Ec ifInMulticastPkts */
+ uint32_t rbca_u; /* F0 ifInBroadcastPkts */
+ uint32_t rbca_l; /* F4 ifInBroadcastPkts */
+ uint32_t terr_u; /* F8 if_out_errors */
+ uint32_t terr_l; /* Fc if_out_errors */
+ uint32_t reserved100[2]; /* 100-108 */
+ uint32_t tuca_u; /* 108 if_out_ucast_pkts */
+ uint32_t tuca_l; /* 10c if_out_ucast_pkts */
+ uint32_t tmca_u; /* 110 ifOutMulticastPkts */
+ uint32_t tmca_l; /* 114 ifOutMulticastPkts */
+ uint32_t tbca_u; /* 118 ifOutBroadcastPkts */
+ uint32_t tbca_l; /* 11c ifOutBroadcastPkts */
+ uint32_t rdrp_u; /* 120 etherStatsDropEvents */
+ uint32_t rdrp_l; /* 124 etherStatsDropEvents */
+ uint32_t reoct_u; /* 128 etherStatsOctets */
+ uint32_t reoct_l; /* 12c etherStatsOctets */
+ uint32_t rpkt_u; /* 130 etherStatsPkts */
+ uint32_t rpkt_l; /* 134 etherStatsPkts */
+ uint32_t trund_u; /* 138 etherStatsUndersizePkts */
+ uint32_t trund_l; /* 13c etherStatsUndersizePkts */
+ uint32_t r64_u; /* 140 etherStatsPkts64Octets */
+ uint32_t r64_l; /* 144 etherStatsPkts64Octets */
+ uint32_t r127_u; /* 148 etherStatsPkts65to127Octets */
+ uint32_t r127_l; /* 14c etherStatsPkts65to127Octets */
+ uint32_t r255_u; /* 150 etherStatsPkts128to255Octets */
+ uint32_t r255_l; /* 154 etherStatsPkts128to255Octets */
+ uint32_t r511_u; /* 158 etherStatsPkts256to511Octets */
+ uint32_t r511_l; /* 15c etherStatsPkts256to511Octets */
+ uint32_t r1023_u; /* 160 etherStatsPkts512to1023Octets */
+ uint32_t r1023_l; /* 164 etherStatsPkts512to1023Octets */
+ uint32_t r1518_u; /* 168 etherStatsPkts1024to1518Octets */
+ uint32_t r1518_l; /* 16c etherStatsPkts1024to1518Octets */
+ uint32_t r1519x_u; /* 170 etherStatsPkts1519toX */
+ uint32_t r1519x_l; /* 174 etherStatsPkts1519toX */
+ uint32_t trovr_u; /* 178 etherStatsOversizePkts */
+ uint32_t trovr_l; /* 17c etherStatsOversizePkts */
+ uint32_t trjbr_u; /* 180 etherStatsJabbers */
+ uint32_t trjbr_l; /* 184 etherStatsJabbers */
+ uint32_t trfrg_u; /* 188 etherStatsFragments */
+ uint32_t trfrg_l; /* 18C etherStatsFragments */
+ uint32_t rerr_u; /* 190 if_in_errors */
+ uint32_t rerr_l; /* 194 if_in_errors */
+};
+
+/**
+*struct tgec_cfg - TGEC configuration
+ *
+*@...error_discard: Receive Erroneous Frame Discard Enable. When set to 1
+* any frame received with an error is discarded in the
+* Core and not forwarded to the Client interface.
+* When set to 0 (Reset value), erroneous Frames are
+* forwarded to the Client interface with ff_rx_err
+* asserted.
+*@...se_ignore: Ignore Pause Frame Quanta. If set to 1 received pause
+* frames are ignored by the MAC. When set to 0
+* (Reset value) the transmit process is stopped for the
+* amount of time specified in the pause quanta received
+* within a pause frame.
+*@...se_forward_enable:
+* Terminate / Forward Pause Frames. If set to 1 pause
+* frames are forwarded to the user application. When set
+* to 0 (Reset value) pause frames are terminated and
+* discarded within the MAC.
+*@...length_check_enable:
+* Payload Length Check Disable. When set to 0
+* (Reset value), the Core checks the frame's payload
+* length with the Frame Length/Type field, when set to 1
+* the payload length check is disabled.
+*@..._frame_enable: Enables reception of all command frames. When set to 1
+* all Command Frames are accepted, when set to 0
+* (Reset Value) only Pause Frames are accepted and all
+* other Command Frames are rejected.
+*@...d_idle_enable: Force Idle Generation. When set to 1, the MAC
+* permanently sends XGMII Idle sequences even when faults
+* are received.
+*@..._mode_enable: WAN Mode Enable. Sets WAN mode (1) or LAN mode
+* (0, default) of operation.
+*@...miscuous_mode_enable:
+* Enables MAC promiscuous operation. When set to 1, all
+* frames are received without any MAC address filtering,
+* when set to 0 (Reset value) Unicast Frames with a
+* destination address not matching the Core MAC Address
+* (MAC Address programmed in Registers MAC_ADDR_0 and
+* MAC_ADDR_1 or the MAC address programmed in Registers
+* MAC_ADDR_2 and MAC_ADDR_3) are rejected.
+*@...addr_ins_enable: Set Source MAC Address on Transmit. If set to 1 the
+* MAC overwrites the source MAC address received from the
+* Client Interface with one of the MAC addresses. If set
+* to 0 (Reset value), the source MAC address from the
+* Client Interface is transmitted unmodified to the line.
+*@...pback_enable: PHY Interface Loopback. When set to 1, the signal
+* loop_ena is set to '1', when set to 0 (Reset value)
+* the signal loop_ena is set to 0.
+*@...h_check_nostdr: The Core interprets the Length/Type field differently
+* depending on the value of this Bit
+*@...e_stamp_enable: This bit selects between enabling and disabling the
+* IEEE 1588 functionality. 1: IEEE 1588 is enabled
+* 0: IEEE 1588 is disabled
+*@..._frame_length: Maximum supported received frame length.
+* The 10GEC MAC supports reception of any frame size up
+* to 16,352 bytes (0x3FE0). Typical settings are
+* 0x05EE (1,518 bytes) for standard frames.
+* Default setting is 0x0600 (1,536 bytes).
+* Received frames that exceed this stated maximum
+* are truncated.
+*@...se_quant: Pause quanta value used with transmitted pause frames.
+* Each quanta represents a 512 bit-times.
+*@...ipg_length: Transmit Inter-Packet-Gap (IPG) value. A 6-bit value:
+* Depending on LAN or WAN mode of operation the value has
+* the following meaning: - LAN Mode: Number of octets in
+* steps of 4. Valid values are 8, 12, 16, ... 100. DIC is
+* fully supported (see 10.6.1 page 49) for any setting. A
+* default of 12 (reset value) must be set to conform to
+* IEEE802.3ae. Warning: When set to 8, PCS layers may not
+* be able to perform clock rate compensation. - WAN Mode:
+* Stretch factor. Valid values are 4..15. The stretch
+* factor is calculated as (value+1)*8. A default of 12
+* (reset value) must be set to conform to IEEE 802.3ae
+* (i.e. 13*8=104). A larger value shrinks the IPG
+* (increasing bandwidth).
+ *
+*This structure contains basic TGEC configuration and must be passed to
+*fman_tgec_init() function. A default set of configuration values can be
+*obtained by calling fman_tgec_defconfig().
+ */
+struct tgec_cfg {
+ bool rx_error_discard;
+ bool pause_ignore;
+ bool pause_forward_enable;
+ bool no_length_check_enable;
+ bool cmd_frame_enable;
+ bool send_idle_enable;
+ bool wan_mode_enable;
+ bool promiscuous_mode_enable;
+ bool tx_addr_ins_enable;
+ bool loopback_enable;
+ bool lgth_check_nostdr;
+ bool time_stamp_enable;
+ uint16_t max_frame_length;
+ uint16_t pause_quant;
+ uint32_t tx_ipg_length;
+ bool skip_fman11_workaround;
+};
+
+void fman_tgec_defconfig(struct tgec_cfg *cfg);
+
+/**
+*fman_tgec_init() - Init tgec hardware block
+*@...s: Pointer to tgec register block
+*@cfg: tgec configuration data
+*@...eptions_mask: initial exceptions mask
+ *
+*This function initializes the tgec controller and applies its
+*basic configuration.
+ *
+*Returns: 0 if successful, an error code otherwise.
+ */
+
+int fman_tgec_init(struct tgec_regs __iomem *regs, struct tgec_cfg *cfg,
+ uint32_t exception_mask);
+
+void fman_tgec_enable(struct tgec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+void fman_tgec_disable(struct tgec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+uint32_t fman_tgec_get_revision(struct tgec_regs __iomem *regs);
+
+void fman_tgec_set_mac_address(struct tgec_regs __iomem *regs,
+ uint8_t *macaddr);
+
+void fman_tgec_set_promiscuous(struct tgec_regs __iomem *regs, bool val);
+
+/**
+*fman_tgec_set_hash_table() - Sets the Hashtable Control Register
+*@...s: Pointer to TGEC register block
+*@...ue: Value to be written in Hashtable Control Register
+ */
+void fman_tgec_set_hash_table(struct tgec_regs __iomem *regs, uint32_t value);
+
+/**
+*fman_tgec_set_tx_pause_frames() - Sets the Pause Quanta Register
+*@...s: Pointer to TGEC register block
+*@...se_time: Pause quanta value used with transmitted pause frames.
+* Each quanta represents a 512 bit-times
+ */
+void fman_tgec_set_tx_pause_frames(struct tgec_regs __iomem *regs,
+ uint16_t pause_time);
+
+/**
+*fman_tgec_set_rx_ignore_pause_frames() - Changes the policy WRT pause frames
+*@...s: Pointer to TGEC register block
+*@en: Ignore/Respond to pause frame quanta
+ *
+*Sets the value of PAUSE_IGNORE field in the COMMAND_CONFIG Register
+*0 - MAC stops transmit process for the duration specified
+*in the Pause frame quanta of a received Pause frame.
+*1 - MAC ignores received Pause frames.
+ */
+void fman_tgec_set_rx_ignore_pause_frames(struct tgec_regs __iomem *regs,
+ bool en);
+
+uint32_t fman_tgec_get_event(struct tgec_regs __iomem *regs, uint32_t ev_mask);
+
+void fman_tgec_ack_event(struct tgec_regs __iomem *regs, uint32_t ev_mask);
+
+uint32_t fman_tgec_get_interrupt_mask(struct tgec_regs __iomem *regs);
+
+void fman_tgec_enable_interrupt(struct tgec_regs __iomem *regs,
+ uint32_t ev_mask);
+
+void fman_tgec_disable_interrupt(struct tgec_regs __iomem *regs,
+ uint32_t ev_mask);
+
+/**
+*fman_tgec_get_max_frame_len() - Returns the maximum frame length value
+*@...s: Pointer to TGEC register block
+ */
+uint16_t fman_tgec_get_max_frame_len(struct tgec_regs __iomem *regs);
+
+/**
+*fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007() - Initialize the
+*main tgec configuration parameters
+*@...s: Pointer to TGEC register block
+ *
+*TODO
+ */
+void fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007(struct tgec_regs
+ __iomem *regs);
+
+#endif /* __FSL_FMAN_TGEC_H */
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists