| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1434092837-10290-1-git-send-email-juston.h.li@gmail.com>
Date: Fri, 12 Jun 2015 00:07:17 -0700
From: Juston Li <juston.h.li@...il.com>
To: sudipm.mukherjee@...il.com, teddy.wang@...iconmotion.com,
gregkh@...uxfoundation.org, linux-fbdev@...r.kernel.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Cc: Juston Li <juston.h.li@...il.com>
Subject: [PATCH] staging: sm750fb: fix c99 comments
fixed all checkpatch.pl ERROR: do not use C99 // comments
Any C99 comments used to comment out code are simply removed.
Also some of the errors occur inside '#if 0' blocks which I
might as well fix since checkpatch.pl caught them but the blocks
themselves should probably be cleaned up later.
Signed-off-by: Juston Li <juston.h.li@...il.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 11 ++------
drivers/staging/sm750fb/ddk750_dvi.c | 4 +--
drivers/staging/sm750fb/ddk750_help.c | 2 --
drivers/staging/sm750fb/ddk750_sii164.c | 11 --------
drivers/staging/sm750fb/sm750.h | 10 +++----
drivers/staging/sm750fb/sm750_accel.c | 49 ++++++++++++++++-----------------
drivers/staging/sm750fb/sm750_accel.h | 2 +-
drivers/staging/sm750fb/sm750_cursor.c | 9 +++---
drivers/staging/sm750fb/sm750_help.h | 28 +++----------------
drivers/staging/sm750fb/sm750_hw.c | 4 +--
drivers/staging/sm750fb/sm750_hw.h | 3 --
11 files changed, 41 insertions(+), 92 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 8b47c1b..b2137c8 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -17,7 +17,7 @@ logical_chip_type_t getChipType(void)
char physicalRev;
logical_chip_type_t chip;
- physicalID = devId750;//either 0x718 or 0x750
+ physicalID = devId750; /* either 0x718 or 0x750 /
physicalRev = revId750;
if (physicalID == 0x718)
@@ -257,7 +257,7 @@ int ddk750_initHw(initchip_param_t *pInitParam)
unsigned int ulReg;
#if 0
- //move the code to map regiter function.
+ /* move the code to map regiter function. */
if (getChipType() == SM718) {
/* turn on big endian bit*/
ulReg = PEEK32(0x74);
@@ -487,8 +487,6 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
}
}
}
-
- //printk("Finally: pll->n[%lu],m[%lu],od[%lu],pod[%lu]\n",pll->N,pll->M,pll->OD,pll->POD);
return ret;
}
@@ -580,14 +578,9 @@ pll_value_t *pPLL /* Structure to hold the value to be set in PLL */
}
/* Restore input frequency from Khz to hz unit */
-// pPLL->inputFreq *= 1000;
ulRequestClk *= 1000;
pPLL->inputFreq = DEFAULT_INPUT_CLOCK; /* Default reference clock */
- /* Output debug information */
- //DDKDEBUGPRINT((DISPLAY_LEVEL, "calcPllValue: Requested Frequency = %d\n", ulRequestClk));
- //DDKDEBUGPRINT((DISPLAY_LEVEL, "calcPllValue: Input CLK = %dHz, M=%d, N=%d, OD=%d, POD=%d\n", pPLL->inputFreq, pPLL->M, pPLL->N, pPLL->OD, pPLL->POD));
-
/* Return actual frequency that the PLL can set */
ret = calcPLL(pPLL);
return ret;
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index f5932bb..b2bf7e6 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -51,7 +51,7 @@ int dviInit(
vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
pllFilterEnable, pllFilterValue);
}
- return -1;//error
+ return -1; /* error */
}
@@ -66,7 +66,6 @@ unsigned short dviGetVendorID(void)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
- //pCurrentDviCtrl = getDviCtrl();
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
return pCurrentDviCtrl->pfnGetVendorId();
@@ -86,7 +85,6 @@ unsigned short dviGetDeviceID(void)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
-// pCurrentDviCtrl = getDviCtrl();
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
return pCurrentDviCtrl->pfnGetDeviceId();
diff --git a/drivers/staging/sm750fb/ddk750_help.c b/drivers/staging/sm750fb/ddk750_help.c
index 647004d..96c18eb 100644
--- a/drivers/staging/sm750fb/ddk750_help.c
+++ b/drivers/staging/sm750fb/ddk750_help.c
@@ -1,5 +1,3 @@
-//#include "ddk750_reg.h"
-//#include "ddk750_chip.h"
#include "ddk750_help.h"
void __iomem * mmio750 = NULL;
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 84464c1..b6395b8 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -125,10 +125,7 @@ long sii164InitChip(
unsigned char pllFilterValue
)
{
- //unsigned char ucRegIndex, ucRegValue;
- //unsigned char ucDeviceAddress,
unsigned char config;
- //unsigned long delayCount;
/* Initialize the i2c bus */
#ifdef USE_HW_I2C
@@ -141,10 +138,6 @@ long sii164InitChip(
/* Check if SII164 Chip exists */
if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID))
{
-
-#ifdef DDKDEBUG
- //sii164PrintRegisterValues();
-#endif
/*
* Initialize SII164 controller chip.
*/
@@ -241,10 +234,6 @@ long sii164InitChip(
config |= SII164_CONFIGURATION_POWER_NORMAL;
i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-#ifdef DDKDEBUG
- //sii164PrintRegisterValues();
-#endif
-
return 0;
}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 30aa312..273882f 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -7,8 +7,6 @@
/* please use revision id to distinguish sm750le and sm750*/
#define SPC_SM750 0
-//#define SPC_SM750LE 8
-
#define MB(x) ((x)<<20)
#define MHZ(x) ((x) * 1000000)
/* align should be 2,4,8,16 */
@@ -95,10 +93,10 @@ struct lynx_cursor{
};
struct lynxfb_crtc{
- unsigned char __iomem * vCursor;//virtual address of cursor
- unsigned char __iomem * vScreen;//virtual address of on_screen
- int oCursor;//cursor address offset in vidmem
- int oScreen;//onscreen address offset in vidmem
+ unsigned char __iomem * vCursor; /* virtual address of cursor */
+ unsigned char __iomem * vScreen; /* virtual address of on_screen */
+ int oCursor; /* cursor address offset in vidmem */
+ int oScreen; /* onscreen address offset in vidmem */
int channel;/* which channel this crtc stands for*/
resource_size_t vidmem_size;/* this view's video memory max size */
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 001e980..a2baffd 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -57,10 +57,10 @@ void hw_de_init(struct lynx_accel * accel)
write_dpr(accel, DE_STRETCH_FORMAT, (read_dpr(accel, DE_STRETCH_FORMAT) & clr) | reg);
/* disable clipping and transparent */
- write_dpr(accel, DE_CLIP_TL, 0);//dpr2c
- write_dpr(accel, DE_CLIP_BR, 0);//dpr30
+ write_dpr(accel, DE_CLIP_TL, 0); /* dpr2c */
+ write_dpr(accel, DE_CLIP_BR, 0); /* dpr30 */
- write_dpr(accel, DE_COLOR_COMPARE_MASK, 0);//dpr24
+ write_dpr(accel, DE_COLOR_COMPARE_MASK, 0); /* dpr24 */
write_dpr(accel, DE_COLOR_COMPARE, 0);
reg = FIELD_SET(0, DE_CONTROL, TRANSPARENCY, DISABLE)|
@@ -104,25 +104,25 @@ int hw_fillrect(struct lynx_accel * accel,
return -1;
}
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base);//dpr40
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base); /* dpr40 */
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, pitch/Bpp)|
- FIELD_VALUE(0, DE_PITCH, SOURCE, pitch/Bpp));//dpr10
+ FIELD_VALUE(0, DE_PITCH, SOURCE, pitch/Bpp)); /* dpr10 */
write_dpr(accel, DE_WINDOW_WIDTH,
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, pitch/Bpp)|
- FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, pitch/Bpp));//dpr44
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, pitch/Bpp)); /* dpr44 */
- write_dpr(accel, DE_FOREGROUND, color);//DPR14
+ write_dpr(accel, DE_FOREGROUND, color); /* DPR14 */
write_dpr(accel, DE_DESTINATION,
FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE)|
FIELD_VALUE(0, DE_DESTINATION, X, x)|
- FIELD_VALUE(0, DE_DESTINATION, Y, y));//dpr4
+ FIELD_VALUE(0, DE_DESTINATION, Y, y)); /* dpr4 */
write_dpr(accel, DE_DIMENSION,
FIELD_VALUE(0, DE_DIMENSION, X, width)|
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));//dpr8
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr8 */
deCtrl =
FIELD_SET(0, DE_CONTROL, STATUS, START)|
@@ -130,7 +130,7 @@ int hw_fillrect(struct lynx_accel * accel,
FIELD_SET(0, DE_CONTROL, LAST_PIXEL, ON)|
FIELD_SET(0, DE_CONTROL, COMMAND, RECTANGLE_FILL)|
FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2)|
- FIELD_VALUE(0, DE_CONTROL, ROP, rop);//dpr0xc
+ FIELD_VALUE(0, DE_CONTROL, ROP, rop); /* dpr0xc */
write_dpr(accel, DE_CONTROL, deCtrl);
return 0;
@@ -236,12 +236,12 @@ unsigned int rop2) /* ROP value */
/* 2D Source Base.
It is an address offset (128 bit aligned) from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase);//dpr40
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
/* 2D Destination Base.
It is an address offset (128 bit aligned) from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);//dpr44
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
@@ -254,14 +254,14 @@ unsigned int rop2) /* ROP value */
width *= 3;
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
- FIELD_VALUE(0, DE_PITCH, SOURCE, sPitch));//dpr10
+ FIELD_VALUE(0, DE_PITCH, SOURCE, sPitch)); /* dpr10 */
}
else
#endif
{
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, (dPitch/Bpp)) |
- FIELD_VALUE(0, DE_PITCH, SOURCE, (sPitch/Bpp)));//dpr10
+ FIELD_VALUE(0, DE_PITCH, SOURCE, (sPitch/Bpp))); /* dpr10 */
}
/* Screen Window width in Pixels.
@@ -269,7 +269,7 @@ unsigned int rop2) /* ROP value */
*/
write_dpr(accel, DE_WINDOW_WIDTH,
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
- FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp)));//dpr3c
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
if (accel->de_wait() != 0){
return -1;
@@ -280,14 +280,14 @@ unsigned int rop2) /* ROP value */
write_dpr(accel, DE_SOURCE,
FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
- FIELD_VALUE(0, DE_SOURCE, Y_K2, sy));//dpr0
+ FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
write_dpr(accel, DE_DESTINATION,
FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
FIELD_VALUE(0, DE_DESTINATION, X, dx) |
- FIELD_VALUE(0, DE_DESTINATION, Y, dy));//dpr04
+ FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
write_dpr(accel, DE_DIMENSION,
FIELD_VALUE(0, DE_DIMENSION, X, width) |
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));//dpr08
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
de_ctrl =
FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
@@ -297,7 +297,7 @@ unsigned int rop2) /* ROP value */
FIELD_SET(0, DE_CONTROL, DIRECTION, RIGHT_TO_LEFT)
: FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT)) |
FIELD_SET(0, DE_CONTROL, STATUS, START);
- write_dpr(accel, DE_CONTROL, de_ctrl);//dpr0c
+ write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
}
return 0;
@@ -346,7 +346,6 @@ int hw_imageblit(struct lynx_accel *accel,
if(accel->de_wait() != 0)
{
-// inf_msg("*** ImageBlit return -1 ***\n");
return -1;
}
@@ -370,7 +369,7 @@ int hw_imageblit(struct lynx_accel *accel,
startBit *= 3;
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
- FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch));//dpr10
+ FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch)); /* dpr10 */
}
else
@@ -378,7 +377,7 @@ int hw_imageblit(struct lynx_accel *accel,
{
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch/bytePerPixel) |
- FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch/bytePerPixel));//dpr10
+ FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch/bytePerPixel)); /* dpr10 */
}
/* Screen Window width in Pixels.
@@ -392,16 +391,16 @@ int hw_imageblit(struct lynx_accel *accel,
For mono bitmap, use startBit for X_K1. */
write_dpr(accel, DE_SOURCE,
FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit));//dpr00
+ FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
write_dpr(accel, DE_DESTINATION,
FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
FIELD_VALUE(0, DE_DESTINATION, X, dx) |
- FIELD_VALUE(0, DE_DESTINATION, Y, dy));//dpr04
+ FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
write_dpr(accel, DE_DIMENSION,
FIELD_VALUE(0, DE_DIMENSION, X, width) |
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));//dpr08
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
write_dpr(accel, DE_FOREGROUND, fColor);
write_dpr(accel, DE_BACKGROUND, bColor);
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index e9d217b..57e20fb 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -113,7 +113,7 @@
#define DE_CONTROL_TRANSPARENCY_ENABLE 1
#define DE_CONTROL_ROP 7:0
-// Pseudo fields.
+/* Pseudo fields. */
#define DE_CONTROL_SHORT_STROKE_DIR 27:24
#define DE_CONTROL_SHORT_STROKE_DIR_225 0
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index b145285..cb37ea3 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -141,10 +141,10 @@ void hw_cursor_setData(struct lynx_cursor * cursor,
{
if(opr & (0x80 >> j))
- { //use fg color,id = 2
+ { /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
- //use bg color,id = 1
+ /* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
@@ -221,10 +221,10 @@ void hw_cursor_setData2(struct lynx_cursor * cursor,
{
if(opr & (0x80 >> j))
- { //use fg color,id = 2
+ { /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
- //use bg color,id = 1
+ /* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
@@ -238,7 +238,6 @@ void hw_cursor_setData2(struct lynx_cursor * cursor,
/* assume pitch is 1,2,4,8,...*/
if(!(i&(pitch-1)))
- //if((i+1) % pitch == 0)
{
/* need a return */
pstart += offset;
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index ebc946c..05777f7 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -1,9 +1,7 @@
#ifndef LYNX_HELP_H__
#define LYNX_HELP_H__
-/*****************************************************************************\
- * FIELD MACROS *
-\*****************************************************************************/
+/* FIELD MACROS */
#define _LSB(f) (0 ? f)
#define _MSB(f) (1 ? f)
#define _COUNT(f) (_MSB(f) - _LSB(f) + 1)
@@ -17,13 +15,7 @@
#define SET_FIELDV(d, f, v) (((d) & ~GET_MASK(f)) | \
(((v) & RAW_MASK(f)) << _LSB(f)))
-
-////////////////////////////////////////////////////////////////////////////////
-// //
-// Internal macros //
-// //
-////////////////////////////////////////////////////////////////////////////////
-
+/* Internal macros */
#define _F_START(f) (0 ? f)
#define _F_END(f) (1 ? f)
#define _F_SIZE(f) (1 + _F_END(f) - _F_START(f))
@@ -31,13 +23,7 @@
#define _F_NORMALIZE(v, f) (((v) & _F_MASK(f)) >> _F_START(f))
#define _F_DENORMALIZE(v, f) (((v) << _F_START(f)) & _F_MASK(f))
-
-////////////////////////////////////////////////////////////////////////////////
-// //
-// Global macros //
-// //
-////////////////////////////////////////////////////////////////////////////////
-
+/* Global macros */
#define FIELD_GET(x, reg, field) \
( \
_F_NORMALIZE((x), reg ## _ ## field) \
@@ -60,13 +46,7 @@
~ _F_MASK(reg ## _ ## field) \
)
-
-////////////////////////////////////////////////////////////////////////////////
-// //
-// Field Macros //
-// //
-////////////////////////////////////////////////////////////////////////////////
-
+/* Field Macros */
#define FIELD_START(field) (0 ? field)
#define FIELD_END(field) (1 ? field)
#define FIELD_SIZE(field) (1 + FIELD_END(field) - FIELD_START(field))
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 131125c..e70961e 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -193,7 +193,6 @@ int hw_sm750_inithw(struct lynx_share* share, struct pci_dev * pdev)
/* init 2d engine */
if(!share->accel_off){
hw_sm750_initAccel(share);
-// share->accel.de_wait = hw_sm750_deWait;
}
return 0;
@@ -328,7 +327,6 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
#endif
/* set timing */
-// modparm.pixel_clock = PS_TO_HZ(var->pixclock);
modparm.pixel_clock = ps_to_hz(var->pixclock);
modparm.vertical_sync_polarity = (var->sync & FB_SYNC_HOR_HIGH_ACT) ? POS:NEG;
modparm.horizontal_sync_polarity = (var->sync & FB_SYNC_VERT_HIGH_ACT) ? POS:NEG;
@@ -618,7 +616,7 @@ int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
const struct fb_info *info)
{
uint32_t total;
- //check params
+ /* check params */
if ((var->xoffset + var->xres > var->xres_virtual) ||
(var->yoffset + var->yres > var->yres_virtual)) {
return -EINVAL;
diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h
index 4fee28d..93288b3 100644
--- a/drivers/staging/sm750fb/sm750_hw.h
+++ b/drivers/staging/sm750fb/sm750_hw.h
@@ -8,9 +8,6 @@
#define SM750LE_REVISION_ID (unsigned char)0xfe
#endif
-//#define DEFAULT_MEM_CLOCK (DEFAULT_SM750_CHIP_CLOCK/1)
-//#define DEFAULT_MASTER_CLOCK (DEFAULT_SM750_CHIP_CLOCK/3)
-
enum sm750_pnltype{
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists