linux-kernel - [PATCH v3 4/5] serial/8250_fintek: Support keys different than default

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1434444069-30260-5-git-send-email-ricardo.ribalda@gmail.com>
Date:	Tue, 16 Jun 2015 10:41:08 +0200
From:	Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.cz>, Alan Cox <alan@...ux.intel.com>,
	"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
	Peter Huewe <PeterHuewe@....de>, linux-serial@...r.kernel.org,
	linux-kernel@...r.kernel.org, peter_hong@...tek.com.tw
Cc:	Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
Subject: [PATCH v3 4/5] serial/8250_fintek: Support keys different than default

Chip can be configured to use entry key different than 0x77. Try all the
valid keys until one gives out the right chip id.

Reported-by: Peter Hong <peter_hong@...tek.com.tw>
Reviewed-by: Alan Cox <alan@...ux.intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
---
 drivers/tty/serial/8250/8250_fintek.c | 39 +++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 2c3228e84a2e..8fa4d88fc98f 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -19,7 +19,6 @@
 
 #define ADDR_PORT 0
 #define DATA_PORT 1
-#define ENTRY_KEY 0x77
 #define EXIT_KEY 0xAA
 #define CHIP_ID1  0x20
 #define CHIP_ID2  0x21
@@ -42,17 +41,18 @@
 struct fintek_8250 {
 	u16 base_port;
 	u8 index;
+	u8 key;
 	long line;
 };
 
-static int fintek_8250_enter_key(u16 base_port)
+static int fintek_8250_enter_key(u16 base_port, u8 key)
 {
 
 	if (!request_muxed_region(base_port, 2, DRIVER_NAME))
 		return -EBUSY;
 
-	outb(ENTRY_KEY, base_port + ADDR_PORT);
-	outb(ENTRY_KEY, base_port + ADDR_PORT);
+	outb(key, base_port + ADDR_PORT);
+	outb(key, base_port + ADDR_PORT);
 	return 0;
 }
 
@@ -134,7 +134,7 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	if (rs485->flags & SER_RS485_RTS_ON_SEND)
 		config |= RTS_INVERT;
 
-	if (fintek_8250_enter_key(pdata->base_port))
+	if (fintek_8250_enter_key(pdata->base_port, pdata->key))
 		return -EBUSY;
 
 	outb(LDN, pdata->base_port + ADDR_PORT);
@@ -148,20 +148,25 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	return 0;
 }
 
-static int fintek_8250_base_port(void)
+static int fintek_8250_base_port(u8 *key)
 {
 	static const u16 addr[] = {0x4e, 0x2e};
-	int i;
+	static const u16 keys[] = {0x77, 0xa0, 0x87, 0x67};
+	int i, j;
 
 	for (i = 0; i < ARRAY_SIZE(addr); i++) {
-		int ret;
-
-		if (fintek_8250_enter_key(addr[i]))
-			continue;
-		ret = fintek_8250_check_id(addr[i]);
-		fintek_8250_exit_key(addr[i]);
-		if (!ret)
-			return addr[i];
+		for (j = 0; j < ARRAY_SIZE(keys); j++) {
+			int ret;
+
+			if (fintek_8250_enter_key(addr[i], keys[j]))
+				continue;
+			ret = fintek_8250_check_id(addr[i]);
+			fintek_8250_exit_key(addr[i]);
+			if (!ret) {
+				*key = keys[j];
+				return addr[i];
+			}
+		}
 	}
 
 	return -ENODEV;
@@ -174,11 +179,12 @@ fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	struct fintek_8250 *pdata;
 	int index;
 	int base_port;
+	u8 key;
 
 	if (!pnp_port_valid(dev, 0))
 		return -ENODEV;
 
-	base_port = fintek_8250_base_port();
+	base_port = fintek_8250_base_port(&key);
 	if (base_port < 0)
 		return -ENODEV;
 
@@ -206,6 +212,7 @@ fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	uart.port.uartclk = 1843200;
 	uart.port.dev = &dev->dev;
 
+	pdata->key = key;
 	pdata->base_port = base_port;
 	pdata->index = index;
 	pdata->line = serial8250_register_8250_port(&uart);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/