linux-kernel - Re: [PATCH 02/20] [SCSI] mpt3sas: Get IOC_FACTS information using handshake protocol only after HBA card gets into READY or Operational state.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <558047E7.6000901@redhat.com>
Date:	Tue, 16 Jun 2015 17:59:35 +0200
From:	Tomas Henzl <thenzl@...hat.com>
To:	Sreekanth Reddy <sreekanth.reddy@...gotech.com>, jejb@...nel.org,
	hch@...radead.org
CC:	martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
	JBottomley@...allels.com, Sathya.Prakash@...gotech.com,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH 02/20] [SCSI] mpt3sas: Get IOC_FACTS information using
 handshake protocol only after HBA card gets into READY or Operational state.

On 06/12/2015 11:42 AM, Sreekanth Reddy wrote:
> Driver initialization fails if driver tries to send IOC facts request message when the IOC is in reset or in a fault state.
> 
> This patch will make sure that
>  1.Driver to send IOC facts request message only if HBA is in operational or ready state.
>  2.If IOC is in fault state, a diagnostic reset would be issued.
>  3.If IOC is in reset state then driver will wait for 10 seconds to exit out of reset state.
>    If the HBA continues to be in reset state, then the HBA wouldn't be claimed by the driver.
> 
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@...gotech.com>
> ---
>  drivers/scsi/mpt3sas/mpt3sas_base.c | 65 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index c13a365..ce57320 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
> @@ -3169,6 +3169,9 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
>   * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
>   */
>  static int
> +_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
> +
> +static int
>  _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
>  	int sleep_flag)
>  {
> @@ -3711,6 +3714,61 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
>  }
>  
>  /**
> + * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
> + * @ioc: per adapter object
> + * @timeout:
> + * @sleep_flag: CAN_SLEEP or NO_SLEEP
> + *
> + * Returns 0 for success, non-zero for failure.
> + */
> +static int
> +_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
> +	int sleep_flag)
> +{
> +	u32 ioc_state;
> +	int rc;
> +
> +	dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
> +	    __func__));
> +
> +	if (ioc->pci_error_recovery)
> +		return 0;
Hi Sreekanth, isn't that^ an error condition - 'return -EFAULT;'
would be better?
Tomas
> +
> +	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
> +	dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
> +	    ioc->name, __func__, ioc_state));
> +
> +	if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
> +	    (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
> +		return 0;
> +
> +	if (ioc_state & MPI2_DOORBELL_USED) {
> +		dhsprintk(ioc, printk(MPT3SAS_FMT
> +		    "unexpected doorbell active!\n", ioc->name));
> +		goto issue_diag_reset;
> +	}
> +
> +	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
> +		mpt3sas_base_fault_info(ioc, ioc_state &
> +		    MPI2_DOORBELL_DATA_MASK);
> +		goto issue_diag_reset;
> +	}
> +
> +	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
> +	    timeout, sleep_flag);
> +	if (ioc_state) {
> +		dfailprintk(ioc, printk(MPT3SAS_FMT
> +		    "%s: failed going to ready state (ioc_state=0x%x)\n",
> +		    ioc->name, __func__, ioc_state));
> +		return -EFAULT;
> +	}
> +
> + issue_diag_reset:
> +	rc = _base_diag_reset(ioc, sleep_flag);
> +	return rc;
> +}
> +
> +/**
>   * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
>   * @ioc: per adapter object
>   * @sleep_flag: CAN_SLEEP or NO_SLEEP
> @@ -3728,6 +3786,13 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
>  	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
>  	    __func__));
>  
> +	r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
> +	if (r) {
> +		dfailprintk(ioc, printk(MPT3SAS_FMT
> +		    "%s: failed getting to correct state\n",
> +		    ioc->name, __func__));
> +		return r;
> +	}
>  	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
>  	mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
>  	memset(&mpi_request, 0, mpi_request_sz);
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/