linux-kernel - [PATCH v3] watchdog: bcm2835: Fix poweroff behaviour

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1434549844-11704-1-git-send-email-noralf@tronnes.org>
Date:	Wed, 17 Jun 2015 16:04:04 +0200
From:	Noralf Trønnes <noralf@...nnes.org>
To:	linux-watchdog@...r.kernel.org
Cc:	linux-arm-kernel@...ts.infradead.org,
	linux-rpi-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Noralf Trønnes <noralf@...nnes.org>
Subject: [PATCH v3] watchdog: bcm2835: Fix poweroff behaviour

Currently poweroff/halt results in a reboot on the Raspberry Pi.
The firmware uses the RSTS register to know which partiton to
boot from. The partiton value is spread into bits
0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by
the firmware to indicate halt.

The firmware made this change in 19 Aug 2013 and was matched
by the downstream commit:
Changes for new NOOBS multi partition booting from gsh

Signed-off-by: Noralf Trønnes <noralf@...nnes.org>
---

v2: Fix typo in commit message

v3: Only Raspberry Pi is supported so it's ok to just modify
    the poweroff function (Stephen Warrren)

 drivers/watchdog/bcm2835_wdt.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
index 7116968..43dbf5b 100644
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -36,6 +36,13 @@
 #define PM_RSTC_WRCFG_FULL_RESET	0x00000020
 #define PM_RSTC_RESET			0x00000102

+/*
+ * The Raspberry Pi firmware uses the RSTS register to know which partiton
+ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
+ * Partiton 63 is a special partition used by the firmware to indicate halt.
+ */
+#define PM_RSTS_RASPBERRYPI_HALT	0x555
+
 #define SECS_TO_WDOG_TICKS(x) ((x) << 16)
 #define WDOG_TICKS_TO_SECS(x) ((x) >> 16)

@@ -151,8 +158,7 @@ static void bcm2835_power_off(void)
 	 * hard reset.
 	 */
 	val = readl_relaxed(wdt->base + PM_RSTS);
-	val &= PM_RSTC_WRCFG_CLR;
-	val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
+	val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
 	writel_relaxed(val, wdt->base + PM_RSTS);

 	/* Continue with normal reset mechanism */
--
2.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/