linux-kernel - [PATCH 1/2] clocksource: sh_cmt: Only perform clocksource suspend/resume if enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1434622954-26747-2-git-send-email-geert+renesas@glider.be>
Date:	Thu, 18 Jun 2015 12:22:33 +0200
From:	Geert Uytterhoeven <geert+renesas@...der.be>
To:	Daniel Lezcano <daniel.lezcano@...aro.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Kevin Hilman <khilman@...nel.org>,
	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	Magnus Damm <damm@...nsource.se>,
	Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
	linux-pm@...r.kernel.org, linux-sh@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH 1/2] clocksource: sh_cmt: Only perform clocksource suspend/resume if enabled

Currently the sh_cmt clocksource timer is disabled or enabled
unconditionally on clocksource suspend resp. resume, even if a better
clocksource is present (e.g. arch_sys_counter) and the sh_cmt
clocksource is not enabled.

As sh_cmt is a syscore device when its timer is enabled, this may lead
to a genpd.prepared_count imbalance in the presence of PM Domains, which
may cause a lock up during reboot after s2ram.

During suspend:
  - pm_genpd_prepare() is called for all non-syscore devices (incl.
    sh_cmt), increasing genpd.prepared_count for each device,
  - clocksource.suspend() is called for all clocksource devices,
  - sh_cmt_clocksource_suspend() calls sh_cmt_stop(), which is a no-op
    as the clocksource was not enabled.

During resume:
  - clocksource.resume() is called for all clocksource devices,
  - sh_cmt_clocksource_resume() calls sh_cmt_start(), which enables the
    clocksource timer, and turns sh_cmt into a syscore device,
  - pm_genpd_complete() is called for all non-syscore devices (excl.
    sh_cmt now!), decreasing genpd.prepared_count for each device but
    sh_cmt.

Now genpd.prepared_count of the PM Domain containing sh_cmt is still 1
instead of zero.  On subsequent suspend/resume cycles, sh_cmt is still a
syscore device, hence it's skipped for pm_genpd_{prepare,complete}(),
keeping the imbalance of genpd.prepared_count at 1.

During reboot:
  - platform_drv_shutdown() is called for any platform device that has
    a driver with a .shutdown() method (only rcar-dmac on R-Car Gen2),
  - platform_drv_shutdown() calls dev_pm_domain_detach(), which
    calls genpd_dev_pm_detach(),
  - genpd_dev_pm_detach() keeps calling pm_genpd_remove_device() until
    it doesn't return -EAGAIN,
  - If the device is part of the same PM Domain as sh_cmt,
    pm_genpd_remove_device() always fails with -EAGAIN due to
    genpd.prepared_count > 0.
  - Infinite loop in genpd_dev_pm_detach().

To fix this, only disable or enable the clocksource timer on clocksource
suspend resp. resume if the clocksource was enabled.

This was tested on r8a7791/koelsch with the CPG Clock Domain:
  - using arch_sys_counter as the clocksource, which is the default, and
    which showed the problem,
  - using sh_cmt as a clocksource ("echo ffca0000.timer > \
    /sys/devices/system/clocksource/clocksource0/current_clocksource"),
    which behaves the same as before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
 drivers/clocksource/sh_cmt.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index b8ff3c64cc452a16..c96de14036a0adeb 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -661,6 +661,9 @@ static void sh_cmt_clocksource_suspend(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
 
+	if (!ch->cs_enabled)
+		return;
+
 	sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
 	pm_genpd_syscore_poweroff(&ch->cmt->pdev->dev);
 }
@@ -669,6 +672,9 @@ static void sh_cmt_clocksource_resume(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
 
+	if (!ch->cs_enabled)
+		return;
+
 	pm_genpd_syscore_poweron(&ch->cmt->pdev->dev);
 	sh_cmt_start(ch, FLAG_CLOCKSOURCE);
 }
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/