| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 18 Jun 2015 17:47:50 +0530
From: Sudip Mukherjee <sudipm.mukherjee@...il.com>
To: David Howells <dhowells@...hat.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Johan Hovold <johan@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-am33-list@...hat.com, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-usb@...r.kernel.org,
Sudip Mukherjee <sudipm.mukherjee@...il.com>
Subject: [PATCH v2 4/7] USB: mos7720: rename DCR
While building with mn10300 it failed with:
error: expected identifier before '(' token
#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
note: in expansion of macro '__SYSREG'
#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */
mn10300 has a register named as DCR, so when this driver used an enum
named as DCR, build failed.
Just rename the DCR in the driver to parport_DCR.
Signed-off-by: Sudip Mukherjee <sudip@...torindia.org>
---
drivers/usb/serial/mos7720.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4f70df3..3263125 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -135,7 +135,7 @@ enum mos_regs {
DLM,
DPR, /* parallel port regs */
DSR,
- DCR,
+ parport_DCR,
ECR,
SP1_REG, /* device control regs */
SP2_REG, /* serial port 2 (7720 only) */
@@ -164,7 +164,7 @@ static inline __u16 get_reg_index(enum mos_regs reg)
0x01, /* DLM */
0x00, /* DPR */
0x01, /* DSR */
- 0x02, /* DCR */
+ 0x02, /* parport_DCR */
0x0a, /* ECR */
0x01, /* SP1_REG */
0x02, /* SP2_REG (7720 only) */
@@ -510,7 +510,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
if (parport_prologue(pp) < 0)
return;
data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
- write_mos_reg(mos_parport->serial, dummy, DCR, data);
+ write_mos_reg(mos_parport->serial, dummy, parport_DCR, data);
mos_parport->shadowDCR = data;
parport_epilogue(pp);
}
@@ -543,7 +543,7 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp,
if (parport_prologue(pp) < 0)
return 0;
mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, parport_DCR, mos_parport->shadowDCR);
dcr = mos_parport->shadowDCR & 0x0f;
parport_epilogue(pp);
return dcr;
@@ -581,7 +581,7 @@ static void parport_mos7715_data_forward(struct parport *pp)
return;
mos7715_change_mode(mos_parport, PS2);
mos_parport->shadowDCR &= ~0x20;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, parport_DCR, mos_parport->shadowDCR);
parport_epilogue(pp);
}
@@ -593,7 +593,7 @@ static void parport_mos7715_data_reverse(struct parport *pp)
return;
mos7715_change_mode(mos_parport, PS2);
mos_parport->shadowDCR |= 0x20;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, parport_DCR, mos_parport->shadowDCR);
parport_epilogue(pp);
}
@@ -633,7 +633,7 @@ static void parport_mos7715_restore_state(struct parport *pp,
spin_unlock(&release_lock);
return;
}
- write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR);
+ write_parport_reg_nonblock(mos_parport, parport_DCR, mos_parport->shadowDCR);
write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR);
spin_unlock(&release_lock);
}
@@ -719,7 +719,7 @@ static int mos7715_parport_init(struct usb_serial *serial)
/* initialize device registers */
mos_parport->shadowDCR = DCR_INIT_VAL;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, parport_DCR, mos_parport->shadowDCR);
mos_parport->shadowECR = ECR_INIT_VAL;
write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists