[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1434632230.git.cyrille.pitchen@atmel.com>
Date: Thu, 18 Jun 2015 15:05:08 +0200
From: Cyrille Pitchen <cyrille.pitchen@...el.com>
To: <nicolas.ferre@...el.com>, <boris.brezillon@...e-electrons.com>,
<alexandre.belloni@...e-electrons.com>, <sameo@...ux.intel.com>,
<lee.jones@...aro.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<devicetree@...r.kernel.org>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom
ChangeLog
v2:
- enhance the documentation of DT bindings and change the way the "ranges"
property is used.
- replace __raw_readl() and __raw_writel() by readl() and writel().
- change the module license to "GPL" for v2 or later
- print the selected flexcom mode after the hardware version
v1:
This series of patches a support to the Atmel Flexcom, a wrapper which
integrates an USART, a SPI controller and a TWI controller. Only one
peripheral can be used at a time. The active function is selected though
the Flexcom Mode Register.
Cyrille Pitchen (2):
mfd: devicetree: add bindings for Atmel Flexcom
mfd: flexcom: add a driver for Atmel Flexible Serial Communication
Unit
.../devicetree/bindings/mfd/atmel-flexcom.txt | 58 +++++++++++++
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-flexcom.c | 97 ++++++++++++++++++++++
4 files changed, 167 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
create mode 100644 drivers/mfd/atmel-flexcom.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists