| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGTfZH0AsRwcFwevAiQeyL=VUxiCvCx+3OEFKQ4nV3DpRdsdoQ@mail.gmail.com>
Date: Fri, 19 Jun 2015 11:36:47 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Cc: Lee Jones <lee.jones@...aro.org>,
"myungjoo.ham@...sung.com" <myungjoo.ham@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
patches@...nsource.wolfsonmicro.com
Subject: Re: [PATCH v2 3/5] extcon: arizona: Convert to gpiod
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
<ckeepax@...nsource.wolfsonmicro.com> wrote:
> Convert to using the newer gpiod interface for the micd_pol_gpio.
> Although we still carry support for the old gpio interface from pdata.
>
> Signed-off-by: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
> ---
> drivers/extcon/extcon-arizona.c | 36 +++++++++++++++++++++++++++++++-----
> 1 files changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index 5bf1b19..71d60ba 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -20,6 +20,7 @@
> #include <linux/slab.h>
> #include <linux/interrupt.h>
> #include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/input.h>
> #include <linux/platform_device.h>
> @@ -95,6 +96,8 @@ struct arizona_extcon_info {
> int hpdet_ip_version;
>
> struct extcon_dev *edev;
> +
> + struct gpio_desc *micd_pol_gpio;
> };
>
> static const struct arizona_micd_config micd_default_modes[] = {
> @@ -205,6 +208,10 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
> if (arizona->pdata.micd_pol_gpio > 0)
> gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
> info->micd_modes[mode].gpio);
> + else if (info->micd_pol_gpio)
> + gpiod_set_value_cansleep(info->micd_pol_gpio,
> + info->micd_modes[mode].gpio);
gpiod_set_value_cansleep() check always the whether
info->micd_pol_gpiod is NULl or not. So, I think that you can modify
it as following without additional if statemet.
e.g.,
else
gpiod_set_value_cansleep(info->micd_pol_gpio,
> +
> regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
> ARIZONA_MICD_BIAS_SRC_MASK,
> info->micd_modes[mode].bias <<
> @@ -1271,6 +1278,22 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> arizona->pdata.micd_pol_gpio, ret);
> goto err_register;
> }
> + } else {
> + if (info->micd_modes[0].gpio)
I'd like you to define the constant varaible for index (0) on separate patch.
> + mode = GPIOD_OUT_HIGH;
> + else
> + mode = GPIOD_OUT_LOW;
> +
> + info->micd_pol_gpio = gpiod_get_optional(arizona->dev,
> + "wlf,micd-pol",
> + GPIOD_OUT_LOW);
You can use the devm_gpiod_get_optional() to manage the system
resource automatically.
> + if (IS_ERR(info->micd_pol_gpio)) {
> + ret = PTR_ERR(info->micd_pol_gpio);
> + dev_err(arizona->dev,
> + "Failed to get microphone polarity GPIO: %d\n",
> + ret);
> + goto err_register;
> + }
> }
>
> if (arizona->pdata.hpdet_id_gpio > 0) {
> @@ -1281,7 +1304,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> if (ret != 0) {
> dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
> arizona->pdata.hpdet_id_gpio, ret);
> - goto err_register;
> + goto err_gpio;
> }
> }
>
> @@ -1325,7 +1348,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> dev_err(arizona->dev,
> "MICD ranges must be sorted\n");
> ret = -EINVAL;
> - goto err_input;
> + goto err_gpio;
> }
> }
> }
> @@ -1344,7 +1367,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> dev_err(arizona->dev, "Unsupported MICD level %d\n",
> info->micd_ranges[i].max);
> ret = -EINVAL;
> - goto err_input;
> + goto err_gpio;
> }
>
> dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
> @@ -1417,7 +1440,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> if (ret != 0) {
> dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
> ret);
> - goto err_input;
> + goto err_gpio;
> }
>
> ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
> @@ -1488,7 +1511,8 @@ err_rise_wake:
> arizona_set_irq_wake(arizona, jack_irq_rise, 0);
> err_rise:
> arizona_free_irq(arizona, jack_irq_rise, info);
> -err_input:
> +err_gpio:
> + gpiod_put(info->micd_pol_gpio);
> err_register:
> pm_runtime_disable(&pdev->dev);
> return ret;
> @@ -1500,6 +1524,8 @@ static int arizona_extcon_remove(struct platform_device *pdev)
> struct arizona *arizona = info->arizona;
> int jack_irq_rise, jack_irq_fall;
>
> + gpiod_put(info->micd_pol_gpio);
> +
> pm_runtime_disable(&pdev->dev);
>
> regmap_update_bits(arizona->regmap,
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists