[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1434731014-19980-5-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Date: Fri, 19 Jun 2015 17:23:31 +0100
From: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
To: lee.jones@...aro.org, cw00.choi@...sung.com
Cc: myungjoo.ham@...sung.com, sameo@...ux.intel.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
patches@...nsource.wolfsonmicro.com
Subject: [PATCH v5 4/7] extcon: arizona: Convert to gpiod
Convert to using the newer gpiod interface for the micd_pol_gpio.
Although we still carry support for the old gpio interface from pdata.
Signed-off-by: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
---
drivers/extcon/extcon-arizona.c | 41 ++++++++++++++++++++++++++++++++++----
1 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index b364b8b..8f0ef72 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/platform_device.h>
@@ -95,6 +96,8 @@ struct arizona_extcon_info {
int hpdet_ip_version;
struct extcon_dev *edev;
+
+ struct gpio_desc *micd_pol_gpio;
};
static const struct arizona_micd_config micd_default_modes[] = {
@@ -205,6 +208,10 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
if (arizona->pdata.micd_pol_gpio > 0)
gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
info->micd_modes[mode].gpio);
+ else
+ gpiod_set_value_cansleep(info->micd_pol_gpio,
+ info->micd_modes[mode].gpio);
+
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_BIAS_SRC_MASK,
info->micd_modes[mode].bias <<
@@ -1258,6 +1265,27 @@ static int arizona_extcon_probe(struct platform_device *pdev)
arizona->pdata.micd_pol_gpio, ret);
goto err_register;
}
+ } else {
+ if (info->micd_modes[0].gpio)
+ mode = GPIOD_OUT_HIGH;
+ else
+ mode = GPIOD_OUT_LOW;
+
+ /* We can't use devm here because we need to do the get
+ * against the MFD device, as that is where the of_node
+ * will reside, but if we devm against that the GPIO
+ * will not be freed if the extcon driver is unloaded.
+ */
+ info->micd_pol_gpio = gpiod_get_optional(arizona->dev,
+ "wlf,micd-pol",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(info->micd_pol_gpio)) {
+ ret = PTR_ERR(info->micd_pol_gpio);
+ dev_err(arizona->dev,
+ "Failed to get microphone polarity GPIO: %d\n",
+ ret);
+ goto err_register;
+ }
}
if (arizona->pdata.hpdet_id_gpio > 0) {
@@ -1268,7 +1296,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
arizona->pdata.hpdet_id_gpio, ret);
- goto err_register;
+ goto err_gpio;
}
}
@@ -1320,7 +1348,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
dev_err(arizona->dev,
"MICD ranges must be sorted\n");
ret = -EINVAL;
- goto err_input;
+ goto err_gpio;
}
}
}
@@ -1339,7 +1367,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
dev_err(arizona->dev, "Unsupported MICD level %d\n",
info->micd_ranges[i].max);
ret = -EINVAL;
- goto err_input;
+ goto err_gpio;
}
dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
@@ -1412,7 +1440,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
ret);
- goto err_input;
+ goto err_gpio;
}
ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
@@ -1483,7 +1511,8 @@ err_rise_wake:
arizona_set_irq_wake(arizona, jack_irq_rise, 0);
err_rise:
arizona_free_irq(arizona, jack_irq_rise, info);
-err_input:
+err_gpio:
+ gpiod_put(info->micd_pol_gpio);
err_register:
pm_runtime_disable(&pdev->dev);
return ret;
@@ -1495,6 +1524,8 @@ static int arizona_extcon_remove(struct platform_device *pdev)
struct arizona *arizona = info->arizona;
int jack_irq_rise, jack_irq_fall;
+ gpiod_put(info->micd_pol_gpio);
+
pm_runtime_disable(&pdev->dev);
regmap_update_bits(arizona->regmap,
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists