| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1434761450-15722-1-git-send-email-juston.h.li@gmail.com>
Date: Fri, 19 Jun 2015 17:50:50 -0700
From: Juston Li <juston.h.li@...il.com>
To: sudipm.mukherjee@...il.com, teddy.wang@...iconmotion.com,
gregkh@...uxfoundation.org, linux-fbdev@...r.kernel.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Cc: Juston Li <juston.h.li@...il.com>
Subject: [PATCH] staging: sm750fb: use tabs for indentation
Replace spaces with tabs for indentation to fix the checkpatch.pl warning
'WARNING: please, no spaces at the start of a line'
checkpatch doesn't catch comments indented by spaces but I fixed comments
adjacent to warnings as well so they would remain aligned.
Signed-off-by: Juston Li <juston.h.li@...il.com>
---
drivers/staging/sm750fb/ddk750_display.c | 96 ++++----
drivers/staging/sm750fb/ddk750_display.h | 2 +-
drivers/staging/sm750fb/ddk750_dvi.c | 66 ++---
drivers/staging/sm750fb/ddk750_help.h | 4 +-
drivers/staging/sm750fb/ddk750_hwi2c.c | 252 ++++++++++---------
drivers/staging/sm750fb/ddk750_mode.c | 142 +++++------
drivers/staging/sm750fb/ddk750_mode.h | 46 ++--
drivers/staging/sm750fb/ddk750_power.c | 254 ++++++++++----------
drivers/staging/sm750fb/ddk750_power.h | 8 +-
drivers/staging/sm750fb/ddk750_reg.h | 18 +-
drivers/staging/sm750fb/ddk750_sii164.c | 400 +++++++++++++++----------------
drivers/staging/sm750fb/ddk750_sii164.h | 29 ++-
drivers/staging/sm750fb/sm750.h | 24 +-
drivers/staging/sm750fb/sm750_accel.c | 364 ++++++++++++++--------------
drivers/staging/sm750fb/sm750_accel.h | 4 +-
drivers/staging/sm750fb/sm750_help.h | 26 +-
drivers/staging/sm750fb/sm750_hw.c | 70 +++---
drivers/staging/sm750fb/sm750_hw.h | 28 +--
18 files changed, 906 insertions(+), 927 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index a3e6720..cae9d91 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -24,7 +24,7 @@ static void setDisplayControl(int ctrl, int dispState)
/* Timing should be enabled first before enabling the plane
* because changing at the same time does not guarantee that
* the plane will also enabled or disabled.
- */
+ */
ulDisplayCtrlReg = FIELD_SET(ulDisplayCtrlReg,
PANEL_DISPLAY_CTRL, TIMING, ENABLE);
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
@@ -145,26 +145,26 @@ static void waitNextVerticalSync(int ctrl, int delay)
return;
}
- while (delay-- > 0)
- {
- /* Wait for end of vsync. */
- do
- {
- status = FIELD_GET(PEEK32(SYSTEM_CTRL),
- SYSTEM_CTRL,
- PANEL_VSYNC);
- }
- while (status == SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
-
- /* Wait for start of vsync. */
- do
- {
- status = FIELD_GET(PEEK32(SYSTEM_CTRL),
- SYSTEM_CTRL,
- PANEL_VSYNC);
- }
- while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
- }
+ while (delay-- > 0)
+ {
+ /* Wait for end of vsync. */
+ do
+ {
+ status = FIELD_GET(PEEK32(SYSTEM_CTRL),
+ SYSTEM_CTRL,
+ PANEL_VSYNC);
+ }
+ while (status == SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
+
+ /* Wait for start of vsync. */
+ do
+ {
+ status = FIELD_GET(PEEK32(SYSTEM_CTRL),
+ SYSTEM_CTRL,
+ PANEL_VSYNC);
+ }
+ while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
+ }
}else{
@@ -275,33 +275,33 @@ void ddk750_setLogicalDispOut(disp_output_t output)
int ddk750_initDVIDisp(void)
{
- /* Initialize DVI. If the dviInit fail and the VendorID or the DeviceID are
- not zeroed, then set the failure flag. If it is zeroe, it might mean
- that the system is in Dual CRT Monitor configuration. */
-
- /* De-skew enabled with default 111b value.
- This will fix some artifacts problem in some mode on board 2.2.
- Somehow this fix does not affect board 2.1.
- */
- if ((dviInit(1, /* Select Rising Edge */
- 1, /* Select 24-bit bus */
- 0, /* Select Single Edge clock */
- 1, /* Enable HSync as is */
- 1, /* Enable VSync as is */
- 1, /* Enable De-skew */
- 7, /* Set the de-skew setting to maximum setup */
- 1, /* Enable continuous Sync */
- 1, /* Enable PLL Filter */
- 4 /* Use the recommended value for PLL Filter value */
- ) != 0) && (dviGetVendorID() != 0x0000) && (dviGetDeviceID() != 0x0000))
- {
- return (-1);
- }
-
- /* TODO: Initialize other display component */
-
- /* Success */
- return 0;
+ /* Initialize DVI. If the dviInit fail and the VendorID or the DeviceID are
+ not zeroed, then set the failure flag. If it is zeroe, it might mean
+ that the system is in Dual CRT Monitor configuration. */
+
+ /* De-skew enabled with default 111b value.
+ This will fix some artifacts problem in some mode on board 2.2.
+ Somehow this fix does not affect board 2.1.
+ */
+ if ((dviInit(1, /* Select Rising Edge */
+ 1, /* Select 24-bit bus */
+ 0, /* Select Single Edge clock */
+ 1, /* Enable HSync as is */
+ 1, /* Enable VSync as is */
+ 1, /* Enable De-skew */
+ 7, /* Set the de-skew setting to maximum setup */
+ 1, /* Enable continuous Sync */
+ 1, /* Enable PLL Filter */
+ 4 /* Use the recommended value for PLL Filter value */
+ ) != 0) && (dviGetVendorID() != 0x0000) && (dviGetDeviceID() != 0x0000))
+ {
+ return (-1);
+ }
+
+ /* TODO: Initialize other display component */
+
+ /* Success */
+ return 0;
}
diff --git a/drivers/staging/sm750fb/ddk750_display.h b/drivers/staging/sm750fb/ddk750_display.h
index ae0f84c..018a661 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -8,7 +8,7 @@
#define PNL_2_OFFSET 0
#define PNL_2_MASK (3 << PNL_2_OFFSET)
#define PNL_2_USAGE (PNL_2_MASK << 16)
-#define PNL_2_PRI ((0 << PNL_2_OFFSET)|PNL_2_USAGE)
+#define PNL_2_PRI ((0 << PNL_2_OFFSET)|PNL_2_USAGE)
#define PNL_2_SEC ((2 << PNL_2_OFFSET)|PNL_2_USAGE)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index b2bf7e6..35866fa 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -12,35 +12,35 @@
static dvi_ctrl_device_t g_dcftSupportedDviController[] =
{
#ifdef DVI_CTRL_SII164
- {
- .pfnInit = sii164InitChip,
- .pfnGetVendorId = sii164GetVendorID,
- .pfnGetDeviceId = sii164GetDeviceID,
+ {
+ .pfnInit = sii164InitChip,
+ .pfnGetVendorId = sii164GetVendorID,
+ .pfnGetDeviceId = sii164GetDeviceID,
#ifdef SII164_FULL_FUNCTIONS
- .pfnResetChip = sii164ResetChip,
- .pfnGetChipString = sii164GetChipString,
- .pfnSetPower = sii164SetPower,
- .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
- .pfnIsConnected = sii164IsConnected,
- .pfnCheckInterrupt = sii164CheckInterrupt,
- .pfnClearInterrupt = sii164ClearInterrupt,
+ .pfnResetChip = sii164ResetChip,
+ .pfnGetChipString = sii164GetChipString,
+ .pfnSetPower = sii164SetPower,
+ .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
+ .pfnIsConnected = sii164IsConnected,
+ .pfnCheckInterrupt = sii164CheckInterrupt,
+ .pfnClearInterrupt = sii164ClearInterrupt,
#endif
- },
+ },
#endif
};
int dviInit(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
+ unsigned char edgeSelect,
+ unsigned char busSelect,
+ unsigned char dualEdgeClkSelect,
+ unsigned char hsyncEnable,
+ unsigned char vsyncEnable,
+ unsigned char deskewEnable,
+ unsigned char deskewSetting,
+ unsigned char continuousSyncEnable,
+ unsigned char pllFilterEnable,
+ unsigned char pllFilterValue
)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
@@ -48,8 +48,8 @@ int dviInit(
if(pCurrentDviCtrl->pfnInit != NULL)
{
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
- vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
- pllFilterEnable, pllFilterValue);
+ vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
+ pllFilterEnable, pllFilterValue);
}
return -1; /* error */
}
@@ -64,13 +64,13 @@ int dviInit(
*/
unsigned short dviGetVendorID(void)
{
- dvi_ctrl_device_t *pCurrentDviCtrl;
+ dvi_ctrl_device_t *pCurrentDviCtrl;
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
- return pCurrentDviCtrl->pfnGetVendorId();
+ pCurrentDviCtrl = g_dcftSupportedDviController;
+ if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
+ return pCurrentDviCtrl->pfnGetVendorId();
- return 0x0000;
+ return 0x0000;
}
@@ -83,13 +83,13 @@ unsigned short dviGetVendorID(void)
*/
unsigned short dviGetDeviceID(void)
{
- dvi_ctrl_device_t *pCurrentDviCtrl;
+ dvi_ctrl_device_t *pCurrentDviCtrl;
pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
- return pCurrentDviCtrl->pfnGetDeviceId();
+ if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
+ return pCurrentDviCtrl->pfnGetDeviceId();
- return 0x0000;
+ return 0x0000;
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_help.h b/drivers/staging/sm750fb/ddk750_help.h
index 4285b05..3b06aed 100644
--- a/drivers/staging/sm750fb/ddk750_help.h
+++ b/drivers/staging/sm750fb/ddk750_help.h
@@ -12,8 +12,8 @@
#if 0
/* if 718 big endian turned on,be aware that don't use this driver for general use,only for ppc big-endian */
#warning "big endian on target cpu and enable nature big endian support of 718 capability !"
-#define PEEK32(addr) __raw_readl(mmio750 + addr)
-#define POKE32(addr, data) __raw_writel(data, mmio750 + addr)
+#define PEEK32(addr) __raw_readl(mmio750 + addr)
+#define POKE32(addr, data) __raw_writel(data, mmio750 + addr)
#else /* software control endianness */
#define PEEK32(addr) readl(addr + mmio750)
#define POKE32(addr, data) writel(data, addr + mmio750)
diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c b/drivers/staging/sm750fb/ddk750_hwi2c.c
index 7826376..31553e8 100644
--- a/drivers/staging/sm750fb/ddk750_hwi2c.c
+++ b/drivers/staging/sm750fb/ddk750_hwi2c.c
@@ -9,71 +9,69 @@
#define HWI2C_WAIT_TIMEOUT 0xF0000
-int hwI2CInit(
- unsigned char busSpeedMode
-)
+int hwI2CInit(unsigned char busSpeedMode)
{
- unsigned int value;
+ unsigned int value;
- /* Enable GPIO 30 & 31 as IIC clock & data */
+ /* Enable GPIO 30 & 31 as IIC clock & data */
value = PEEK32(GPIO_MUX);
- value = FIELD_SET(value, GPIO_MUX, 30, I2C) |
- FIELD_SET(0, GPIO_MUX, 31, I2C);
+ value = FIELD_SET(value, GPIO_MUX, 30, I2C) |
+ FIELD_SET(0, GPIO_MUX, 31, I2C);
POKE32(GPIO_MUX, value);
- /* Enable Hardware I2C power.
- TODO: Check if we need to enable GPIO power?
- */
- enableI2C(1);
-
- /* Enable the I2C Controller and set the bus speed mode */
- value = PEEK32(I2C_CTRL);
- if (busSpeedMode == 0)
- value = FIELD_SET(value, I2C_CTRL, MODE, STANDARD);
- else
- value = FIELD_SET(value, I2C_CTRL, MODE, FAST);
- value = FIELD_SET(value, I2C_CTRL, EN, ENABLE);
- POKE32(I2C_CTRL, value);
-
- return 0;
+ /* Enable Hardware I2C power.
+ TODO: Check if we need to enable GPIO power?
+ */
+ enableI2C(1);
+
+ /* Enable the I2C Controller and set the bus speed mode */
+ value = PEEK32(I2C_CTRL);
+ if (busSpeedMode == 0)
+ value = FIELD_SET(value, I2C_CTRL, MODE, STANDARD);
+ else
+ value = FIELD_SET(value, I2C_CTRL, MODE, FAST);
+ value = FIELD_SET(value, I2C_CTRL, EN, ENABLE);
+ POKE32(I2C_CTRL, value);
+
+ return 0;
}
void hwI2CClose(void)
{
- unsigned int value;
+ unsigned int value;
- /* Disable I2C controller */
- value = PEEK32(I2C_CTRL);
- value = FIELD_SET(value, I2C_CTRL, EN, DISABLE);
- POKE32(I2C_CTRL, value);
+ /* Disable I2C controller */
+ value = PEEK32(I2C_CTRL);
+ value = FIELD_SET(value, I2C_CTRL, EN, DISABLE);
+ POKE32(I2C_CTRL, value);
- /* Disable I2C Power */
- enableI2C(0);
+ /* Disable I2C Power */
+ enableI2C(0);
- /* Set GPIO 30 & 31 back as GPIO pins */
- value = PEEK32(GPIO_MUX);
- value = FIELD_SET(value, GPIO_MUX, 30, GPIO);
- value = FIELD_SET(value, GPIO_MUX, 31, GPIO);
- POKE32(GPIO_MUX, value);
+ /* Set GPIO 30 & 31 back as GPIO pins */
+ value = PEEK32(GPIO_MUX);
+ value = FIELD_SET(value, GPIO_MUX, 30, GPIO);
+ value = FIELD_SET(value, GPIO_MUX, 31, GPIO);
+ POKE32(GPIO_MUX, value);
}
static long hwI2CWaitTXDone(void)
{
- unsigned int timeout;
+ unsigned int timeout;
- /* Wait until the transfer is completed. */
- timeout = HWI2C_WAIT_TIMEOUT;
+ /* Wait until the transfer is completed. */
+ timeout = HWI2C_WAIT_TIMEOUT;
while ((FIELD_GET(PEEK32(I2C_STATUS), I2C_STATUS, TX) != I2C_STATUS_TX_COMPLETED) &&
- (timeout != 0))
+ (timeout != 0))
timeout--;
if (timeout == 0)
- return (-1);
+ return (-1);
- return 0;
+ return 0;
}
@@ -90,54 +88,53 @@ static long hwI2CWaitTXDone(void)
* Return Value:
* Total number of bytes those are actually written.
*/
-static unsigned int hwI2CWriteData(
- unsigned char deviceAddress,
- unsigned int length,
- unsigned char *pBuffer
+static unsigned int hwI2CWriteData(unsigned char deviceAddress,
+ unsigned int length,
+ unsigned char *pBuffer
)
{
- unsigned char count, i;
- unsigned int totalBytes = 0;
+ unsigned char count, i;
+ unsigned int totalBytes = 0;
- /* Set the Device Address */
- POKE32(I2C_SLAVE_ADDRESS, deviceAddress & ~0x01);
+ /* Set the Device Address */
+ POKE32(I2C_SLAVE_ADDRESS, deviceAddress & ~0x01);
- /* Write data.
- * Note:
- * Only 16 byte can be accessed per i2c start instruction.
- */
- do
- {
- /* Reset I2C by writing 0 to I2C_RESET register to clear the previous status. */
- POKE32(I2C_RESET, 0);
+ /* Write data.
+ * Note:
+ * Only 16 byte can be accessed per i2c start instruction.
+ */
+ do
+ {
+ /* Reset I2C by writing 0 to I2C_RESET register to clear the previous status. */
+ POKE32(I2C_RESET, 0);
- /* Set the number of bytes to be written */
- if (length < MAX_HWI2C_FIFO)
- count = length - 1;
- else
- count = MAX_HWI2C_FIFO - 1;
- POKE32(I2C_BYTE_COUNT, count);
+ /* Set the number of bytes to be written */
+ if (length < MAX_HWI2C_FIFO)
+ count = length - 1;
+ else
+ count = MAX_HWI2C_FIFO - 1;
+ POKE32(I2C_BYTE_COUNT, count);
- /* Move the data to the I2C data register */
- for (i = 0; i <= count; i++)
- POKE32(I2C_DATA0 + i, *pBuffer++);
+ /* Move the data to the I2C data register */
+ for (i = 0; i <= count; i++)
+ POKE32(I2C_DATA0 + i, *pBuffer++);
- /* Start the I2C */
- POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
+ /* Start the I2C */
+ POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
- /* Wait until the transfer is completed. */
- if (hwI2CWaitTXDone() != 0)
- break;
+ /* Wait until the transfer is completed. */
+ if (hwI2CWaitTXDone() != 0)
+ break;
- /* Substract length */
- length -= (count + 1);
+ /* Substract length */
+ length -= (count + 1);
- /* Total byte written */
- totalBytes += (count + 1);
+ /* Total byte written */
+ totalBytes += (count + 1);
- } while (length > 0);
+ } while (length > 0);
- return totalBytes;
+ return totalBytes;
}
@@ -157,54 +154,53 @@ static unsigned int hwI2CWriteData(
* Return Value:
* Total number of actual bytes read from the slave device
*/
-static unsigned int hwI2CReadData(
- unsigned char deviceAddress,
- unsigned int length,
- unsigned char *pBuffer
+static unsigned int hwI2CReadData(unsigned char deviceAddress,
+ unsigned int length,
+ unsigned char *pBuffer
)
{
- unsigned char count, i;
- unsigned int totalBytes = 0;
+ unsigned char count, i;
+ unsigned int totalBytes = 0;
- /* Set the Device Address */
- POKE32(I2C_SLAVE_ADDRESS, deviceAddress | 0x01);
+ /* Set the Device Address */
+ POKE32(I2C_SLAVE_ADDRESS, deviceAddress | 0x01);
- /* Read data and save them to the buffer.
- * Note:
- * Only 16 byte can be accessed per i2c start instruction.
- */
- do
- {
- /* Reset I2C by writing 0 to I2C_RESET register to clear all the status. */
- POKE32(I2C_RESET, 0);
+ /* Read data and save them to the buffer.
+ * Note:
+ * Only 16 byte can be accessed per i2c start instruction.
+ */
+ do
+ {
+ /* Reset I2C by writing 0 to I2C_RESET register to clear all the status. */
+ POKE32(I2C_RESET, 0);
- /* Set the number of bytes to be read */
- if (length <= MAX_HWI2C_FIFO)
- count = length - 1;
- else
- count = MAX_HWI2C_FIFO - 1;
- POKE32(I2C_BYTE_COUNT, count);
+ /* Set the number of bytes to be read */
+ if (length <= MAX_HWI2C_FIFO)
+ count = length - 1;
+ else
+ count = MAX_HWI2C_FIFO - 1;
+ POKE32(I2C_BYTE_COUNT, count);
- /* Start the I2C */
- POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
+ /* Start the I2C */
+ POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
- /* Wait until transaction done. */
- if (hwI2CWaitTXDone() != 0)
- break;
+ /* Wait until transaction done. */
+ if (hwI2CWaitTXDone() != 0)
+ break;
- /* Save the data to the given buffer */
- for (i = 0; i <= count; i++)
- *pBuffer++ = PEEK32(I2C_DATA0 + i);
+ /* Save the data to the given buffer */
+ for (i = 0; i <= count; i++)
+ *pBuffer++ = PEEK32(I2C_DATA0 + i);
- /* Substract length by 16 */
- length -= (count + 1);
+ /* Substract length by 16 */
+ length -= (count + 1);
- /* Number of bytes read. */
- totalBytes += (count + 1);
+ /* Number of bytes read. */
+ totalBytes += (count + 1);
- } while (length > 0);
+ } while (length > 0);
- return totalBytes;
+ return totalBytes;
}
@@ -221,17 +217,16 @@ static unsigned int hwI2CReadData(
* Return Value:
* Register value
*/
-unsigned char hwI2CReadReg(
- unsigned char deviceAddress,
- unsigned char registerIndex
+unsigned char hwI2CReadReg(unsigned char deviceAddress,
+ unsigned char registerIndex
)
{
- unsigned char value = (0xFF);
+ unsigned char value = (0xFF);
- if (hwI2CWriteData(deviceAddress, 1, ®isterIndex) == 1)
- hwI2CReadData(deviceAddress, 1, &value);
+ if (hwI2CWriteData(deviceAddress, 1, ®isterIndex) == 1)
+ hwI2CReadData(deviceAddress, 1, &value);
- return value;
+ return value;
}
@@ -251,20 +246,19 @@ unsigned char hwI2CReadReg(
* 0 - Success
* -1 - Fail
*/
-int hwI2CWriteReg(
- unsigned char deviceAddress,
- unsigned char registerIndex,
- unsigned char data
+int hwI2CWriteReg(unsigned char deviceAddress,
+ unsigned char registerIndex,
+ unsigned char data
)
{
- unsigned char value[2];
+ unsigned char value[2];
- value[0] = registerIndex;
- value[1] = data;
- if (hwI2CWriteData(deviceAddress, 2, value) == 2)
- return 0;
+ value[0] = registerIndex;
+ value[1] = data;
+ if (hwI2CWriteData(deviceAddress, 2, value) == 2)
+ return 0;
- return (-1);
+ return (-1);
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 74313ff..1f93d07 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -20,54 +20,54 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
x = pModeParam->horizontal_display_end;
y = pModeParam->vertical_display_end;
- /* SM750LE has to set up the top-left and bottom-right
- registers as well.
- Note that normal SM750/SM718 only use those two register for
- auto-centering mode.
- */
- POKE32(CRT_AUTO_CENTERING_TL,
- FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, TOP, 0)
- | FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, LEFT, 0));
-
- POKE32(CRT_AUTO_CENTERING_BR,
- FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, BOTTOM, y-1)
- | FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, RIGHT, x-1));
-
- /* Assume common fields in dispControl have been properly set before
- calling this function.
- This function only sets the extra fields in dispControl.
- */
+ /* SM750LE has to set up the top-left and bottom-right
+ registers as well.
+ Note that normal SM750/SM718 only use those two register for
+ auto-centering mode.
+ */
+ POKE32(CRT_AUTO_CENTERING_TL,
+ FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, TOP, 0)
+ | FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, LEFT, 0));
+
+ POKE32(CRT_AUTO_CENTERING_BR,
+ FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, BOTTOM, y-1)
+ | FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, RIGHT, x-1));
+
+ /* Assume common fields in dispControl have been properly set before
+ calling this function.
+ This function only sets the extra fields in dispControl.
+ */
/* Clear bit 29:27 of display control register */
- dispControl &= FIELD_CLEAR(CRT_DISPLAY_CTRL, CLK);
+ dispControl &= FIELD_CLEAR(CRT_DISPLAY_CTRL, CLK);
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resoluitons. */
if ( x == 800 && y == 600 )
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
else if (x == 1024 && y == 768)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL65);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL65);
else if (x == 1152 && y == 864)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
else if (x == 1280 && y == 768)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
else if (x == 1280 && y == 720)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL74);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL74);
else if (x == 1280 && y == 960)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
else if (x == 1280 && y == 1024)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
else /* default to VGA clock */
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL25);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL25);
/* Set bit 25:24 of display controller */
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CRTSELECT, CRT);
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CRTSELECT, CRT);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT);
- /* Set bit 14 of display controller */
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW);
+ /* Set bit 14 of display controller */
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW);
- POKE32(CRT_DISPLAY_CTRL, dispControl);
+ POKE32(CRT_DISPLAY_CTRL, dispControl);
return dispControl;
}
@@ -84,21 +84,21 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
{
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
- POKE32(CRT_HORIZONTAL_TOTAL,
- FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
- | FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
+ POKE32(CRT_HORIZONTAL_TOTAL,
+ FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
+ | FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
- POKE32(CRT_HORIZONTAL_SYNC,
- FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
- | FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
+ POKE32(CRT_HORIZONTAL_SYNC,
+ FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
+ | FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
- POKE32(CRT_VERTICAL_TOTAL,
- FIELD_VALUE(0, CRT_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
- | FIELD_VALUE(0, CRT_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
+ POKE32(CRT_VERTICAL_TOTAL,
+ FIELD_VALUE(0, CRT_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
+ | FIELD_VALUE(0, CRT_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
- POKE32(CRT_VERTICAL_SYNC,
- FIELD_VALUE(0, CRT_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
- | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
+ POKE32(CRT_VERTICAL_SYNC,
+ FIELD_VALUE(0, CRT_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
+ | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
ulTmpValue = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity)|
@@ -125,39 +125,39 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
unsigned int ulReservedBits;
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
- POKE32(PANEL_HORIZONTAL_TOTAL,
- FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
- | FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
+ POKE32(PANEL_HORIZONTAL_TOTAL,
+ FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
+ | FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
- POKE32(PANEL_HORIZONTAL_SYNC,
- FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
- | FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
+ POKE32(PANEL_HORIZONTAL_SYNC,
+ FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
+ | FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
- POKE32(PANEL_VERTICAL_TOTAL,
- FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
- | FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
+ POKE32(PANEL_VERTICAL_TOTAL,
+ FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
+ | FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
- POKE32(PANEL_VERTICAL_SYNC,
- FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
- | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
+ POKE32(PANEL_VERTICAL_SYNC,
+ FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
+ | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
ulTmpValue = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity)|
- FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity)|
- FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity)|
- FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE)|
- FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
-
- ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) |
- FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_2_MASK, ENABLE) |
- FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE)|
- FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
-
- ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE);
+ FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity)|
+ FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity)|
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE)|
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
+
+ ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) |
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_2_MASK, ENABLE) |
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE)|
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
+
+ ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE);
/* May a hardware bug or just my test chip (not confirmed).
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index 4e8fab3..3548d67 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -5,35 +5,35 @@
typedef enum _spolarity_t
{
- POS = 0, /* positive */
- NEG, /* negative */
+ POS = 0, /* positive */
+ NEG, /* negative */
}
spolarity_t;
typedef struct _mode_parameter_t
{
- /* Horizontal timing. */
- unsigned long horizontal_total;
- unsigned long horizontal_display_end;
- unsigned long horizontal_sync_start;
- unsigned long horizontal_sync_width;
- spolarity_t horizontal_sync_polarity;
-
- /* Vertical timing. */
- unsigned long vertical_total;
- unsigned long vertical_display_end;
- unsigned long vertical_sync_start;
- unsigned long vertical_sync_height;
- spolarity_t vertical_sync_polarity;
-
- /* Refresh timing. */
- unsigned long pixel_clock;
- unsigned long horizontal_frequency;
- unsigned long vertical_frequency;
-
- /* Clock Phase. This clock phase only applies to Panel. */
- spolarity_t clock_phase_polarity;
+ /* Horizontal timing. */
+ unsigned long horizontal_total;
+ unsigned long horizontal_display_end;
+ unsigned long horizontal_sync_start;
+ unsigned long horizontal_sync_width;
+ spolarity_t horizontal_sync_polarity;
+
+ /* Vertical timing. */
+ unsigned long vertical_total;
+ unsigned long vertical_display_end;
+ unsigned long vertical_sync_start;
+ unsigned long vertical_sync_height;
+ spolarity_t vertical_sync_polarity;
+
+ /* Refresh timing. */
+ unsigned long pixel_clock;
+ unsigned long horizontal_frequency;
+ unsigned long vertical_frequency;
+
+ /* Clock Phase. This clock phase only applies to Panel. */
+ spolarity_t clock_phase_polarity;
}
mode_parameter_t;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 1e5f398..b7a108b 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -19,7 +19,7 @@ unsigned int getPowerMode(void)
{
if(getChipType() == SM750LE)
return 0;
- return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
+ return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
}
@@ -29,76 +29,76 @@ unsigned int getPowerMode(void)
*/
void setPowerMode(unsigned int powerMode)
{
- unsigned int control_value = 0;
+ unsigned int control_value = 0;
- control_value = PEEK32(POWER_MODE_CTRL);
+ control_value = PEEK32(POWER_MODE_CTRL);
if(getChipType() == SM750LE)
return;
- switch (powerMode)
- {
- case POWER_MODE_CTRL_MODE_MODE0:
- control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE0);
- break;
+ switch (powerMode)
+ {
+ case POWER_MODE_CTRL_MODE_MODE0:
+ control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE0);
+ break;
- case POWER_MODE_CTRL_MODE_MODE1:
- control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE1);
- break;
+ case POWER_MODE_CTRL_MODE_MODE1:
+ control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE1);
+ break;
- case POWER_MODE_CTRL_MODE_SLEEP:
- control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, SLEEP);
- break;
+ case POWER_MODE_CTRL_MODE_SLEEP:
+ control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, SLEEP);
+ break;
- default:
- break;
- }
+ default:
+ break;
+ }
- /* Set up other fields in Power Control Register */
- if (powerMode == POWER_MODE_CTRL_MODE_SLEEP)
- {
- control_value =
+ /* Set up other fields in Power Control Register */
+ if (powerMode == POWER_MODE_CTRL_MODE_SLEEP)
+ {
+ control_value =
#ifdef VALIDATION_CHIP
- FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, OFF) |
+ FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, OFF) |
#endif
- FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
- }
- else
- {
- control_value =
+ FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
+ }
+ else
+ {
+ control_value =
#ifdef VALIDATION_CHIP
- FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, ON) |
+ FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, ON) |
#endif
- FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, ON);
- }
+ FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, ON);
+ }
- /* Program new power mode. */
- POKE32(POWER_MODE_CTRL, control_value);
+ /* Program new power mode. */
+ POKE32(POWER_MODE_CTRL, control_value);
}
void setCurrentGate(unsigned int gate)
{
- unsigned int gate_reg;
- unsigned int mode;
-
- /* Get current power mode. */
- mode = getPowerMode();
-
- switch (mode)
- {
- case POWER_MODE_CTRL_MODE_MODE0:
- gate_reg = MODE0_GATE;
- break;
-
- case POWER_MODE_CTRL_MODE_MODE1:
- gate_reg = MODE1_GATE;
- break;
-
- default:
- gate_reg = MODE0_GATE;
- break;
- }
- POKE32(gate_reg, gate);
+ unsigned int gate_reg;
+ unsigned int mode;
+
+ /* Get current power mode. */
+ mode = getPowerMode();
+
+ switch (mode)
+ {
+ case POWER_MODE_CTRL_MODE_MODE0:
+ gate_reg = MODE0_GATE;
+ break;
+
+ case POWER_MODE_CTRL_MODE_MODE1:
+ gate_reg = MODE1_GATE;
+ break;
+
+ default:
+ gate_reg = MODE0_GATE;
+ break;
+ }
+ POKE32(gate_reg, gate);
}
@@ -108,21 +108,21 @@ void setCurrentGate(unsigned int gate)
*/
void enable2DEngine(unsigned int enable)
{
- uint32_t gate;
-
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- {
- gate = FIELD_SET(gate, CURRENT_GATE, DE, ON);
- gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
- }
- else
- {
- gate = FIELD_SET(gate, CURRENT_GATE, DE, OFF);
- gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
- }
-
- setCurrentGate(gate);
+ uint32_t gate;
+
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ {
+ gate = FIELD_SET(gate, CURRENT_GATE, DE, ON);
+ gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
+ }
+ else
+ {
+ gate = FIELD_SET(gate, CURRENT_GATE, DE, OFF);
+ gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
+ }
+
+ setCurrentGate(gate);
}
@@ -131,58 +131,58 @@ void enable2DEngine(unsigned int enable)
*/
void enableZVPort(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable ZV Port Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- {
- gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
+ /* Enable ZV Port Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ {
+ gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
#if 1
- /* Using Software I2C */
- gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
+ /* Using Software I2C */
+ gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
#else
- /* Using Hardware I2C */
- gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
+ /* Using Hardware I2C */
+ gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
#endif
- }
- else
- {
- /* Disable ZV Port Gate. There is no way to know whether the GPIO pins are being used
- or not. Therefore, do not disable the GPIO gate. */
- gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
- }
-
- setCurrentGate(gate);
+ }
+ else
+ {
+ /* Disable ZV Port Gate. There is no way to know whether the GPIO pins are being used
+ or not. Therefore, do not disable the GPIO gate. */
+ gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
+ }
+
+ setCurrentGate(gate);
}
void enableSSP(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable SSP Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, SSP, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, SSP, OFF);
+ /* Enable SSP Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, SSP, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, SSP, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
void enableDMA(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable DMA Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, DMA, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, DMA, OFF);
+ /* Enable DMA Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, DMA, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, DMA, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
/*
@@ -190,16 +190,16 @@ void enableDMA(unsigned int enable)
*/
void enableGPIO(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable GPIO Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, GPIO, OFF);
+ /* Enable GPIO Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, GPIO, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
/*
@@ -207,16 +207,16 @@ void enableGPIO(unsigned int enable)
*/
void enablePWM(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable PWM Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, PWM, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, PWM, OFF);
+ /* Enable PWM Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, PWM, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, PWM, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
/*
@@ -224,16 +224,16 @@ void enablePWM(unsigned int enable)
*/
void enableI2C(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable I2C Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, I2C, OFF);
+ /* Enable I2C Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, I2C, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index 4e00955..a20d438 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -3,10 +3,10 @@
typedef enum _DPMS_t
{
- crtDPMS_ON = 0x0,
- crtDPMS_STANDBY = 0x1,
- crtDPMS_SUSPEND = 0x2,
- crtDPMS_OFF = 0x3,
+ crtDPMS_ON = 0x0,
+ crtDPMS_STANDBY = 0x1,
+ crtDPMS_SUSPEND = 0x2,
+ crtDPMS_OFF = 0x3,
}
DPMS_t;
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index 1a40dc2..2995625 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -1640,9 +1640,9 @@
/* CRT Graphics Control */
#define CRT_DISPLAY_CTRL 0x080200
-#define CRT_DISPLAY_CTRL_RESERVED_1_MASK 31:27
-#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_DISABLE 0
-#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_ENABLE 0x1F
+#define CRT_DISPLAY_CTRL_RESERVED_1_MASK 31:27
+#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_DISABLE 0
+#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_ENABLE 0x1F
/* SM750LE definition */
#define CRT_DISPLAY_CTRL_DPMS 31:30
@@ -1664,9 +1664,9 @@
#define CRT_DISPLAY_CTRL_SHIFT_VGA_DAC_ENABLE 0
-#define CRT_DISPLAY_CTRL_RESERVED_2_MASK 25:24
-#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_ENABLE 3
-#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_DISABLE 0
+#define CRT_DISPLAY_CTRL_RESERVED_2_MASK 25:24
+#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_ENABLE 3
+#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_DISABLE 0
/* SM750LE definition */
#define CRT_DISPLAY_CTRL_CRTSELECT 25:25
@@ -1677,11 +1677,11 @@
#define CRT_DISPLAY_CTRL_RGBBIT_12BIT 1
-#define CRT_DISPLAY_CTRL_RESERVED_3_MASK 15:15
+#define CRT_DISPLAY_CTRL_RESERVED_3_MASK 15:15
#define CRT_DISPLAY_CTRL_RESERVED_3_MASK_DISABLE 0
#define CRT_DISPLAY_CTRL_RESERVED_3_MASK_ENABLE 1
-#define CRT_DISPLAY_CTRL_RESERVED_4_MASK 9:9
+#define CRT_DISPLAY_CTRL_RESERVED_4_MASK 9:9
#define CRT_DISPLAY_CTRL_RESERVED_4_MASK_DISABLE 0
#define CRT_DISPLAY_CTRL_RESERVED_4_MASK_ENABLE 1
@@ -1882,7 +1882,7 @@
#endif
/* sm750le new register to control panel output */
-#define DISPLAY_CONTROL_750LE 0x80288
+#define DISPLAY_CONTROL_750LE 0x80288
/* Palette RAM */
/* Panel Palette register starts at 0x080400 ~ 0x0807FC */
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index b6395b8..8606375 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -36,12 +36,12 @@ static char *gDviCtrlChipName = "Silicon Image SiI 164";
*/
unsigned short sii164GetVendorID(void)
{
- unsigned short vendorID;
+ unsigned short vendorID;
- vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
+ vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
+ (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
- return vendorID;
+ return vendorID;
}
/*
@@ -53,12 +53,12 @@ unsigned short sii164GetVendorID(void)
*/
unsigned short sii164GetDeviceID(void)
{
- unsigned short deviceID;
+ unsigned short deviceID;
- deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
+ deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
+ (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
- return deviceID;
+ return deviceID;
}
@@ -112,133 +112,132 @@ unsigned short sii164GetDeviceID(void)
* 0 - Success
* -1 - Fail.
*/
-long sii164InitChip(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
+long sii164InitChip(unsigned char edgeSelect,
+ unsigned char busSelect,
+ unsigned char dualEdgeClkSelect,
+ unsigned char hsyncEnable,
+ unsigned char vsyncEnable,
+ unsigned char deskewEnable,
+ unsigned char deskewSetting,
+ unsigned char continuousSyncEnable,
+ unsigned char pllFilterEnable,
+ unsigned char pllFilterValue
)
{
unsigned char config;
- /* Initialize the i2c bus */
+ /* Initialize the i2c bus */
#ifdef USE_HW_I2C
- /* Use fast mode. */
- hwI2CInit(1);
+ /* Use fast mode. */
+ hwI2CInit(1);
#else
- swI2CInit(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA);
+ swI2CInit(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA);
#endif
- /* Check if SII164 Chip exists */
- if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID))
- {
- /*
- * Initialize SII164 controller chip.
- */
-
- /* Select the edge */
- if (edgeSelect == 0)
- config = SII164_CONFIGURATION_LATCH_FALLING;
- else
- config = SII164_CONFIGURATION_LATCH_RISING;
-
- /* Select bus wide */
- if (busSelect == 0)
- config |= SII164_CONFIGURATION_BUS_12BITS;
- else
- config |= SII164_CONFIGURATION_BUS_24BITS;
-
- /* Select Dual/Single Edge Clock */
- if (dualEdgeClkSelect == 0)
- config |= SII164_CONFIGURATION_CLOCK_SINGLE;
- else
- config |= SII164_CONFIGURATION_CLOCK_DUAL;
-
- /* Select HSync Enable */
- if (hsyncEnable == 0)
- config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW;
- else
- config |= SII164_CONFIGURATION_HSYNC_AS_IS;
-
- /* Select VSync Enable */
- if (vsyncEnable == 0)
- config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW;
- else
- config |= SII164_CONFIGURATION_VSYNC_AS_IS;
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-
- /* De-skew enabled with default 111b value.
- This will fix some artifacts problem in some mode on board 2.2.
- Somehow this fix does not affect board 2.1.
- */
- if (deskewEnable == 0)
- config = SII164_DESKEW_DISABLE;
- else
- config = SII164_DESKEW_ENABLE;
-
- switch (deskewSetting)
- {
- case 0:
- config |= SII164_DESKEW_1_STEP;
- break;
- case 1:
- config |= SII164_DESKEW_2_STEP;
- break;
- case 2:
- config |= SII164_DESKEW_3_STEP;
- break;
- case 3:
- config |= SII164_DESKEW_4_STEP;
- break;
- case 4:
- config |= SII164_DESKEW_5_STEP;
- break;
- case 5:
- config |= SII164_DESKEW_6_STEP;
- break;
- case 6:
- config |= SII164_DESKEW_7_STEP;
- break;
- case 7:
- config |= SII164_DESKEW_8_STEP;
- break;
- }
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
-
- /* Enable/Disable Continuous Sync. */
- if (continuousSyncEnable == 0)
- config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE;
- else
- config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE;
-
- /* Enable/Disable PLL Filter */
- if (pllFilterEnable == 0)
- config |= SII164_PLL_FILTER_DISABLE;
- else
- config |= SII164_PLL_FILTER_ENABLE;
-
- /* Set the PLL Filter value */
- config |= ((pllFilterValue & 0x07) << 1);
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
-
- /* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-
- return 0;
- }
-
- /* Return -1 if initialization fails. */
- return (-1);
+ /* Check if SII164 Chip exists */
+ if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID))
+ {
+ /*
+ * Initialize SII164 controller chip.
+ */
+
+ /* Select the edge */
+ if (edgeSelect == 0)
+ config = SII164_CONFIGURATION_LATCH_FALLING;
+ else
+ config = SII164_CONFIGURATION_LATCH_RISING;
+
+ /* Select bus wide */
+ if (busSelect == 0)
+ config |= SII164_CONFIGURATION_BUS_12BITS;
+ else
+ config |= SII164_CONFIGURATION_BUS_24BITS;
+
+ /* Select Dual/Single Edge Clock */
+ if (dualEdgeClkSelect == 0)
+ config |= SII164_CONFIGURATION_CLOCK_SINGLE;
+ else
+ config |= SII164_CONFIGURATION_CLOCK_DUAL;
+
+ /* Select HSync Enable */
+ if (hsyncEnable == 0)
+ config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW;
+ else
+ config |= SII164_CONFIGURATION_HSYNC_AS_IS;
+
+ /* Select VSync Enable */
+ if (vsyncEnable == 0)
+ config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW;
+ else
+ config |= SII164_CONFIGURATION_VSYNC_AS_IS;
+
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+
+ /* De-skew enabled with default 111b value.
+ This will fix some artifacts problem in some mode on board 2.2.
+ Somehow this fix does not affect board 2.1.
+ */
+ if (deskewEnable == 0)
+ config = SII164_DESKEW_DISABLE;
+ else
+ config = SII164_DESKEW_ENABLE;
+
+ switch (deskewSetting)
+ {
+ case 0:
+ config |= SII164_DESKEW_1_STEP;
+ break;
+ case 1:
+ config |= SII164_DESKEW_2_STEP;
+ break;
+ case 2:
+ config |= SII164_DESKEW_3_STEP;
+ break;
+ case 3:
+ config |= SII164_DESKEW_4_STEP;
+ break;
+ case 4:
+ config |= SII164_DESKEW_5_STEP;
+ break;
+ case 5:
+ config |= SII164_DESKEW_6_STEP;
+ break;
+ case 6:
+ config |= SII164_DESKEW_7_STEP;
+ break;
+ case 7:
+ config |= SII164_DESKEW_8_STEP;
+ break;
+ }
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+
+ /* Enable/Disable Continuous Sync. */
+ if (continuousSyncEnable == 0)
+ config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE;
+ else
+ config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE;
+
+ /* Enable/Disable PLL Filter */
+ if (pllFilterEnable == 0)
+ config |= SII164_PLL_FILTER_DISABLE;
+ else
+ config |= SII164_PLL_FILTER_ENABLE;
+
+ /* Set the PLL Filter value */
+ config |= ((pllFilterValue & 0x07) << 1);
+
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+
+ /* Recover from Power Down and enable output. */
+ config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config |= SII164_CONFIGURATION_POWER_NORMAL;
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+
+ return 0;
+ }
+
+ /* Return -1 if initialization fails. */
+ return (-1);
}
@@ -255,9 +254,9 @@ long sii164InitChip(
*/
void sii164ResetChip(void)
{
- /* Power down */
- sii164SetPower(0);
- sii164SetPower(1);
+ /* Power down */
+ sii164SetPower(0);
+ sii164SetPower(1);
}
@@ -268,7 +267,7 @@ void sii164ResetChip(void)
*/
char *sii164GetChipString(void)
{
- return gDviCtrlChipName;
+ return gDviCtrlChipName;
}
@@ -279,27 +278,25 @@ char *sii164GetChipString(void)
* Input:
* powerUp - Flag to set the power down or up
*/
-void sii164SetPower(
- unsigned char powerUp
-)
+void sii164SetPower(unsigned char powerUp)
{
- unsigned char config;
-
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp == 1)
- {
- /* Power up the chip */
- config &= ~SII164_CONFIGURATION_POWER_MASK;
- config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- }
- else
- {
- /* Power down the chip */
- config &= ~SII164_CONFIGURATION_POWER_MASK;
- config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- }
+ unsigned char config;
+
+ config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ if (powerUp == 1)
+ {
+ /* Power up the chip */
+ config &= ~SII164_CONFIGURATION_POWER_MASK;
+ config |= SII164_CONFIGURATION_POWER_NORMAL;
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ }
+ else
+ {
+ /* Power down the chip */
+ config &= ~SII164_CONFIGURATION_POWER_MASK;
+ config |= SII164_CONFIGURATION_POWER_DOWN;
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ }
}
@@ -307,32 +304,30 @@ void sii164SetPower(
* sii164SelectHotPlugDetectionMode
* This function selects the mode of the hot plug detection.
*/
-static void sii164SelectHotPlugDetectionMode(
- sii164_hot_plug_mode_t hotPlugMode
-)
+static void sii164SelectHotPlugDetectionMode(sii164_hot_plug_mode_t hotPlugMode)
{
- unsigned char detectReg;
-
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode)
- {
- case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
- break;
- case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
- break;
- case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
- break;
- case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
- break;
- }
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ unsigned char detectReg;
+
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
+ switch (hotPlugMode)
+ {
+ case SII164_HOTPLUG_DISABLE:
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+ break;
+ case SII164_HOTPLUG_USE_MDI:
+ detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
+ detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+ break;
+ case SII164_HOTPLUG_USE_RSEN:
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+ break;
+ case SII164_HOTPLUG_USE_HTPLG:
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+ break;
+ }
+
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
}
/*
@@ -341,19 +336,17 @@ static void sii164SelectHotPlugDetectionMode(
*
* enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection
*/
-void sii164EnableHotPlugDetection(
- unsigned char enableHotPlug
-)
+void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
{
- unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
-
- /* Depending on each DVI controller, need to enable the hot plug based on each
- individual chip design. */
- if (enableHotPlug != 0)
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
- else
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
+ unsigned char detectReg;
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+
+ /* Depending on each DVI controller, need to enable the hot plug based on each
+ individual chip design. */
+ if (enableHotPlug != 0)
+ sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
+ else
+ sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
}
/*
@@ -366,13 +359,13 @@ void sii164EnableHotPlugDetection(
*/
unsigned char sii164IsConnected(void)
{
- unsigned char hotPlugValue;
+ unsigned char hotPlugValue;
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK;
- if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
- return 1;
- else
- return 0;
+ hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK;
+ if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
+ return 1;
+ else
+ return 0;
}
/*
@@ -385,13 +378,13 @@ unsigned char sii164IsConnected(void)
*/
unsigned char sii164CheckInterrupt(void)
{
- unsigned char detectReg;
+ unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
- return 1;
- else
- return 0;
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK;
+ if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
+ return 1;
+ else
+ return 0;
}
/*
@@ -400,11 +393,10 @@ unsigned char sii164CheckInterrupt(void)
*/
void sii164ClearInterrupt(void)
{
- unsigned char detectReg;
+ unsigned char detectReg;
- /* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ /* Clear the MDI interrupt */
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index 2b4c7d3..bb0ed25 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -6,25 +6,24 @@
/* Hot Plug detection mode structure */
typedef enum _sii164_hot_plug_mode_t
{
- SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
- SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
- SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
- SII164_HOTPLUG_USE_HTPLG /* Use Hot Plug detect bit. */
+ SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
+ SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
+ SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
+ SII164_HOTPLUG_USE_HTPLG /* Use Hot Plug detect bit. */
} sii164_hot_plug_mode_t;
/* Silicon Image SiI164 chip prototype */
-long sii164InitChip(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
+long sii164InitChip(unsigned char edgeSelect,
+ unsigned char busSelect,
+ unsigned char dualEdgeClkSelect,
+ unsigned char hsyncEnable,
+ unsigned char vsyncEnable,
+ unsigned char deskewEnable,
+ unsigned char deskewSetting,
+ unsigned char continuousSyncEnable,
+ unsigned char pllFilterEnable,
+ unsigned char pllFilterValue
);
unsigned short sii164GetVendorID(void);
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index cc80580..bf894cc 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -5,7 +5,7 @@
#define FB_ACCEL_SMI 0xab
/* please use revision id to distinguish sm750le and sm750*/
-#define SPC_SM750 0
+#define SPC_SM750 0
#define MB(x) ((x)<<20)
#define MHZ(x) ((x) * 1000000)
@@ -38,8 +38,8 @@ struct lynx_accel{
};
-/* lynx_share stands for a presentation of two frame buffer
- that use one smi adaptor , it is similar to a basic class of C++
+/* lynx_share stands for a presentation of two frame buffer
+ that use one smi adaptor , it is similar to a basic class of C++
*/
struct lynx_share{
/* common members */
@@ -126,17 +126,17 @@ struct lynxfb_crtc{
struct lynxfb_output{
int dpms;
int paths;
- /* which paths(s) this output stands for,for sm750:
- paths=1:means output for panel paths
- paths=2:means output for crt paths
- paths=3:means output for both panel and crt paths
+ /* which paths(s) this output stands for,for sm750:
+ paths=1:means output for panel paths
+ paths=2:means output for crt paths
+ paths=3:means output for both panel and crt paths
*/
int *channel;
- /* which channel these outputs linked with,for sm750:
- *channel=0 means primary channel
- *channel=1 means secondary channel
- output->channel ==> &crtc->channel
+ /* which channel these outputs linked with,for sm750:
+ *channel=0 means primary channel
+ *channel=1 means secondary channel
+ output->channel ==> &crtc->channel
*/
void *priv;
@@ -165,7 +165,7 @@ struct lynxfb_par{
#define PS_TO_HZ(ps) \
- ({ \
+ ({ \
unsigned long long hz = 1000*1000*1000*1000ULL; \
do_div(hz, ps); \
(unsigned long)hz;})
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 6eee4cd..806aeed 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -151,97 +151,96 @@ unsigned int width,
unsigned int height, /* width and height of rectangle in pixel value */
unsigned int rop2) /* ROP value */
{
- unsigned int nDirection, de_ctrl;
- int opSign;
- nDirection = LEFT_TO_RIGHT;
+ unsigned int nDirection, de_ctrl;
+ int opSign;
+ nDirection = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
- opSign = 1;
- de_ctrl = 0;
-
- /* If source and destination are the same surface, need to check for overlay cases */
- if (sBase == dBase && sPitch == dPitch)
- {
- /* Determine direction of operation */
- if (sy < dy)
- {
- /* +----------+
- |S |
- | +----------+
- | | | |
- | | | |
- +---|------+ |
- | D|
- +----------+ */
-
- nDirection = BOTTOM_TO_TOP;
- }
- else if (sy > dy)
- {
- /* +----------+
- |D |
- | +----------+
- | | | |
- | | | |
- +---|------+ |
- | S|
- +----------+ */
-
- nDirection = TOP_TO_BOTTOM;
- }
- else
- {
- /* sy == dy */
-
- if (sx <= dx)
- {
- /* +------+---+------+
- |S | | D|
- | | | |
- | | | |
- | | | |
- +------+---+------+ */
-
- nDirection = RIGHT_TO_LEFT;
- }
- else
- {
- /* sx > dx */
-
- /* +------+---+------+
- |D | | S|
- | | | |
- | | | |
- | | | |
- +------+---+------+ */
-
- nDirection = LEFT_TO_RIGHT;
- }
- }
- }
-
- if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT))
- {
- sx += width - 1;
- sy += height - 1;
- dx += width - 1;
- dy += height - 1;
- opSign = (-1);
- }
-
- /* Note:
- DE_FOREGROUND are DE_BACKGROUND are don't care.
- DE_COLOR_COMPARE and DE_COLOR_COMPARE_MAKS are set by set deSetTransparency().
- */
+ opSign = 1;
+ de_ctrl = 0;
- /* 2D Source Base.
- It is an address offset (128 bit aligned) from the beginning of frame buffer.
- */
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+ /* If source and destination are the same surface, need to check for overlay cases */
+ if (sBase == dBase && sPitch == dPitch)
+ {
+ /* Determine direction of operation */
+ if (sy < dy)
+ {
+ /* +----------+
+ |S |
+ | +----------+
+ | | | |
+ | | | |
+ +---|------+ |
+ | D|
+ +----------+ */
+
+ nDirection = BOTTOM_TO_TOP;
+ }
+ else if (sy > dy)
+ {
+ /* +----------+
+ |D |
+ | +----------+
+ | | | |
+ | | | |
+ +---|------+ |
+ | S|
+ +----------+ */
+
+ nDirection = TOP_TO_BOTTOM;
+ }
+ else
+ {
+ /* sy == dy */
+ if (sx <= dx)
+ {
+ /* +------+---+------+
+ |S | | D|
+ | | | |
+ | | | |
+ | | | |
+ +------+---+------+ */
+
+ nDirection = RIGHT_TO_LEFT;
+ }
+ else
+ {
+ /* sx > dx */
+
+ /* +------+---+------+
+ |D | | S|
+ | | | |
+ | | | |
+ | | | |
+ +------+---+------+ */
+
+ nDirection = LEFT_TO_RIGHT;
+ }
+ }
+ }
- /* 2D Destination Base.
- It is an address offset (128 bit aligned) from the beginning of frame buffer.
- */
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
+ if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT))
+ {
+ sx += width - 1;
+ sy += height - 1;
+ dx += width - 1;
+ dy += height - 1;
+ opSign = (-1);
+ }
+
+ /* Note:
+ DE_FOREGROUND are DE_BACKGROUND are don't care.
+ DE_COLOR_COMPARE and DE_COLOR_COMPARE_MAKS are set by set deSetTransparency().
+ */
+
+ /* 2D Source Base.
+ It is an address offset (128 bit aligned) from the beginning of frame buffer.
+ */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+
+ /* 2D Destination Base.
+ It is an address offset (128 bit aligned) from the beginning of frame buffer.
+ */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
@@ -267,54 +266,49 @@ unsigned int rop2) /* ROP value */
/* Screen Window width in Pixels.
2D engine uses this value to calculate the linear address in frame buffer for a given point.
*/
- write_dpr(accel, DE_WINDOW_WIDTH,
- FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
- FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
+ write_dpr(accel, DE_WINDOW_WIDTH,
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
if (accel->de_wait() != 0){
return -1;
}
- {
-
- write_dpr(accel, DE_SOURCE,
- FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
- FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
- write_dpr(accel, DE_DESTINATION,
- FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_DESTINATION, X, dx) |
- FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
- write_dpr(accel, DE_DIMENSION,
- FIELD_VALUE(0, DE_DIMENSION, X, width) |
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
-
- de_ctrl =
- FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
- FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
- FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) |
- ((nDirection == RIGHT_TO_LEFT) ?
- FIELD_SET(0, DE_CONTROL, DIRECTION, RIGHT_TO_LEFT)
- : FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT)) |
- FIELD_SET(0, DE_CONTROL, STATUS, START);
- write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
- }
-
- return 0;
+ write_dpr(accel, DE_SOURCE,
+ FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
+ FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
+ write_dpr(accel, DE_DESTINATION,
+ FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_DESTINATION, X, dx) |
+ FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
+ write_dpr(accel, DE_DIMENSION,
+ FIELD_VALUE(0, DE_DIMENSION, X, width) |
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
+
+ de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
+ FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+ FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) |
+ ((nDirection == RIGHT_TO_LEFT) ?
+ FIELD_SET(0, DE_CONTROL, DIRECTION, RIGHT_TO_LEFT)
+ : FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT)) |
+ FIELD_SET(0, DE_CONTROL, STATUS, START);
+ write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
+
+ return 0;
}
static unsigned int deGetTransparency(struct lynx_accel *accel)
{
- unsigned int de_ctrl;
+ unsigned int de_ctrl;
- de_ctrl = read_dpr(accel, DE_CONTROL);
+ de_ctrl = read_dpr(accel, DE_CONTROL);
- de_ctrl &=
- FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) |
- FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT)|
- FIELD_MASK(DE_CONTROL_TRANSPARENCY);
+ de_ctrl &= FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) |
+ FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT)|
+ FIELD_MASK(DE_CONTROL_TRANSPARENCY);
- return de_ctrl;
+ return de_ctrl;
}
int hw_imageblit(struct lynx_accel *accel,
@@ -332,32 +326,32 @@ int hw_imageblit(struct lynx_accel *accel,
u32 bColor, /* Background color (corresponding to a 0 in the monochrome data */
u32 rop2) /* ROP value */
{
- unsigned int ulBytesPerScan;
- unsigned int ul4BytesPerScan;
- unsigned int ulBytesRemain;
- unsigned int de_ctrl = 0;
- unsigned char ajRemain[4];
- int i, j;
-
- startBit &= 7; /* Just make sure the start bit is within legal range */
- ulBytesPerScan = (width + startBit + 7) / 8;
- ul4BytesPerScan = ulBytesPerScan & ~3;
- ulBytesRemain = ulBytesPerScan & 3;
+ unsigned int ulBytesPerScan;
+ unsigned int ul4BytesPerScan;
+ unsigned int ulBytesRemain;
+ unsigned int de_ctrl = 0;
+ unsigned char ajRemain[4];
+ int i, j;
+
+ startBit &= 7; /* Just make sure the start bit is within legal range */
+ ulBytesPerScan = (width + startBit + 7) / 8;
+ ul4BytesPerScan = ulBytesPerScan & ~3;
+ ulBytesRemain = ulBytesPerScan & 3;
if(accel->de_wait() != 0)
- {
- return -1;
- }
+ {
+ return -1;
+ }
- /* 2D Source Base.
- Use 0 for HOST Blt.
- */
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, 0);
+ /* 2D Source Base.
+ Use 0 for HOST Blt.
+ */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, 0);
- /* 2D Destination Base.
- It is an address offset (128 bit aligned) from the beginning of frame buffer.
- */
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
+ /* 2D Destination Base.
+ It is an address offset (128 bit aligned) from the beginning of frame buffer.
+ */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
Note that input pitch is BYTE value, but the 2D Pitch register uses
@@ -380,30 +374,30 @@ int hw_imageblit(struct lynx_accel *accel,
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch/bytePerPixel)); /* dpr10 */
}
- /* Screen Window width in Pixels.
- 2D engine uses this value to calculate the linear address in frame buffer for a given point.
- */
- write_dpr(accel, DE_WINDOW_WIDTH,
- FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/bytePerPixel)) |
- FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (dPitch/bytePerPixel)));
+ /* Screen Window width in Pixels.
+ 2D engine uses this value to calculate the linear address in frame buffer for a given point.
+ */
+ write_dpr(accel, DE_WINDOW_WIDTH,
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/bytePerPixel)) |
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (dPitch/bytePerPixel)));
- /* Note: For 2D Source in Host Write, only X_K1_MONO field is needed, and Y_K2 field is not used.
- For mono bitmap, use startBit for X_K1. */
- write_dpr(accel, DE_SOURCE,
- FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
+ /* Note: For 2D Source in Host Write, only X_K1_MONO field is needed, and Y_K2 field is not used.
+ For mono bitmap, use startBit for X_K1. */
+ write_dpr(accel, DE_SOURCE,
+ FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
- write_dpr(accel, DE_DESTINATION,
- FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_DESTINATION, X, dx) |
- FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
+ write_dpr(accel, DE_DESTINATION,
+ FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_DESTINATION, X, dx) |
+ FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
- write_dpr(accel, DE_DIMENSION,
- FIELD_VALUE(0, DE_DIMENSION, X, width) |
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
+ write_dpr(accel, DE_DIMENSION,
+ FIELD_VALUE(0, DE_DIMENSION, X, width) |
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
- write_dpr(accel, DE_FOREGROUND, fColor);
- write_dpr(accel, DE_BACKGROUND, bColor);
+ write_dpr(accel, DE_FOREGROUND, fColor);
+ write_dpr(accel, DE_BACKGROUND, bColor);
de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
@@ -413,24 +407,24 @@ int hw_imageblit(struct lynx_accel *accel,
write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
- /* Write MONO data (line by line) to 2D Engine data port */
- for (i=0; i<height; i++)
- {
- /* For each line, send the data in chunks of 4 bytes */
- for (j=0; j<(ul4BytesPerScan/4); j++)
- {
- write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
- }
-
- if (ulBytesRemain)
- {
- memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
- write_dpPort(accel, *(unsigned int *)ajRemain);
- }
-
- pSrcbuf += srcDelta;
- }
-
- return 0;
+ /* Write MONO data (line by line) to 2D Engine data port */
+ for (i=0; i<height; i++)
+ {
+ /* For each line, send the data in chunks of 4 bytes */
+ for (j=0; j<(ul4BytesPerScan/4); j++)
+ {
+ write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
+ }
+
+ if (ulBytesRemain)
+ {
+ memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
+ write_dpPort(accel, *(unsigned int *)ajRemain);
+ }
+
+ pSrcbuf += srcDelta;
+ }
+
+ return 0;
}
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index d3d256c..f252e47 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -7,7 +7,7 @@
/* notes: below address are the offset value from de_base_address (0x100000)*/
/* for sm718/750/502 de_base is at mmreg_1mb*/
-#define DE_BASE_ADDR_TYPE1 0x100000
+#define DE_BASE_ADDR_TYPE1 0x100000
/* for sm712,de_base is at mmreg_32kb */
#define DE_BASE_ADDR_TYPE2 0x8000
/* for sm722,de_base is at mmreg_0 */
@@ -26,7 +26,7 @@
#define DE_SOURCE_WRAP_ENABLE 1
#define DE_SOURCE_X_K1 29:16
#define DE_SOURCE_Y_K2 15:0
-#define DE_SOURCE_X_K1_MONO 20:16
+#define DE_SOURCE_X_K1_MONO 20:16
#define DE_DESTINATION 0x4
#define DE_DESTINATION_WRAP 31:31
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index 05777f7..8ba4f8d 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -11,9 +11,9 @@
#define GET_FIELD(d, f) (((d) >> _LSB(f)) & RAW_MASK(f))
#define TEST_FIELD(d, f, v) (GET_FIELD(d, f) == f ## _ ## v)
#define SET_FIELD(d, f, v) (((d) & ~GET_MASK(f)) | \
- (((f ## _ ## v) & RAW_MASK(f)) << _LSB(f)))
+ (((f ## _ ## v) & RAW_MASK(f)) << _LSB(f)))
#define SET_FIELDV(d, f, v) (((d) & ~GET_MASK(f)) | \
- (((v) & RAW_MASK(f)) << _LSB(f)))
+ (((v) & RAW_MASK(f)) << _LSB(f)))
/* Internal macros */
#define _F_START(f) (0 ? f)
@@ -26,24 +26,24 @@
/* Global macros */
#define FIELD_GET(x, reg, field) \
( \
- _F_NORMALIZE((x), reg ## _ ## field) \
+ _F_NORMALIZE((x), reg ## _ ## field) \
)
#define FIELD_SET(x, reg, field, value) \
( \
- (x & ~_F_MASK(reg ## _ ## field)) \
- | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \
+ (x & ~_F_MASK(reg ## _ ## field)) \
+ | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \
)
#define FIELD_VALUE(x, reg, field, value) \
( \
- (x & ~_F_MASK(reg ## _ ## field)) \
- | _F_DENORMALIZE(value, reg ## _ ## field) \
+ (x & ~_F_MASK(reg ## _ ## field)) \
+ | _F_DENORMALIZE(value, reg ## _ ## field) \
)
#define FIELD_CLEAR(reg, field) \
( \
- ~ _F_MASK(reg ## _ ## field) \
+ ~ _F_MASK(reg ## _ ## field) \
)
/* Field Macros */
@@ -55,20 +55,20 @@
#define FIELD_DENORMALIZE(field, value) (((value) << FIELD_START(field)) & FIELD_MASK(field))
#define FIELD_INIT(reg, field, value) FIELD_DENORMALIZE(reg ## _ ## field, \
- reg ## _ ## field ## _ ## value)
+ reg ## _ ## field ## _ ## value)
#define FIELD_INIT_VAL(reg, field, value) \
- (FIELD_DENORMALIZE(reg ## _ ## field, value))
+ (FIELD_DENORMALIZE(reg ## _ ## field, value))
#define FIELD_VAL_SET(x, r, f, v) x = x & ~FIELD_MASK(r ## _ ## f) \
- | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v)
+ | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v)
#define RGB(r, g, b) \
( \
- (unsigned long) (((r) << 16) | ((g) << 8) | (b)) \
+ (unsigned long) (((r) << 16) | ((g) << 8) | (b)) \
)
#define RGB16(r, g, b) \
( \
- (unsigned short) ((((r) & 0xF8) << 8) | (((g) & 0xFC) << 3) | (((b) & 0xF8) >> 3)) \
+ (unsigned short) ((((r) & 0xF8) << 8) | (((g) & 0xFC) << 3) | (((b) & 0xF8) >> 3)) \
)
static inline unsigned int absDiff(unsigned int a, unsigned int b)
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 84381bc..28db9c7 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -171,23 +171,23 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
*/
- swI2CInit(0, 1);
+ swI2CInit(0, 1);
- /* Customer may NOT use CH7301 DVI chip, which has to be
- initialized differently.
- */
- if (swI2CReadReg(0xec, 0x4a) == 0x95)
- {
- /* The following register values for CH7301 are from
- Chrontel app note and our experiment.
- */
+ /* Customer may NOT use CH7301 DVI chip, which has to be
+ initialized differently.
+ */
+ if (swI2CReadReg(0xec, 0x4a) == 0x95)
+ {
+ /* The following register values for CH7301 are from
+ Chrontel app note and our experiment.
+ */
pr_info("yes,CH7301 DVI chip found\n");
- swI2CWriteReg(0xec, 0x1d, 0x16);
- swI2CWriteReg(0xec, 0x21, 0x9);
- swI2CWriteReg(0xec, 0x49, 0xC0);
+ swI2CWriteReg(0xec, 0x1d, 0x16);
+ swI2CWriteReg(0xec, 0x21, 0x9);
+ swI2CWriteReg(0xec, 0x49, 0xC0);
pr_info("okay,CH7301 DVI chip setup done\n");
- }
+ }
}
/* init 2d engine */
@@ -612,28 +612,28 @@ int hw_sm750_deWait(void)
}
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
- const struct fb_var_screeninfo *var,
- const struct fb_info *info)
+ const struct fb_var_screeninfo *var,
+ const struct fb_info *info)
{
- uint32_t total;
- /* check params */
- if ((var->xoffset + var->xres > var->xres_virtual) ||
- (var->yoffset + var->yres > var->yres_virtual)) {
- return -EINVAL;
- }
-
- total = var->yoffset * info->fix.line_length +
- ((var->xoffset * var->bits_per_pixel) >> 3);
- total += crtc->oScreen;
- if (crtc->channel == sm750_primary) {
- POKE32(PANEL_FB_ADDRESS,
- FIELD_VALUE(PEEK32(PANEL_FB_ADDRESS),
- PANEL_FB_ADDRESS, ADDRESS, total));
- } else {
- POKE32(CRT_FB_ADDRESS,
- FIELD_VALUE(PEEK32(CRT_FB_ADDRESS),
- CRT_FB_ADDRESS, ADDRESS, total));
- }
- return 0;
+ uint32_t total;
+ /* check params */
+ if ((var->xoffset + var->xres > var->xres_virtual) ||
+ (var->yoffset + var->yres > var->yres_virtual)) {
+ return -EINVAL;
+ }
+
+ total = var->yoffset * info->fix.line_length +
+ ((var->xoffset * var->bits_per_pixel) >> 3);
+ total += crtc->oScreen;
+ if (crtc->channel == sm750_primary) {
+ POKE32(PANEL_FB_ADDRESS,
+ FIELD_VALUE(PEEK32(PANEL_FB_ADDRESS),
+ PANEL_FB_ADDRESS, ADDRESS, total));
+ } else {
+ POKE32(CRT_FB_ADDRESS,
+ FIELD_VALUE(PEEK32(CRT_FB_ADDRESS),
+ CRT_FB_ADDRESS, ADDRESS, total));
+ }
+ return 0;
}
diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h
index 93288b3..adc61edf 100644
--- a/drivers/staging/sm750fb/sm750_hw.h
+++ b/drivers/staging/sm750fb/sm750_hw.h
@@ -2,8 +2,8 @@
#define LYNX_HW750_H__
-#define DEFAULT_SM750_CHIP_CLOCK 290
-#define DEFAULT_SM750LE_CHIP_CLOCK 333
+#define DEFAULT_SM750_CHIP_CLOCK 290
+#define DEFAULT_SM750LE_CHIP_CLOCK 333
#ifndef SM750LE_REVISION_ID
#define SM750LE_REVISION_ID (unsigned char)0xfe
#endif
@@ -24,9 +24,9 @@ enum sm750_dataflow{
sm750_simul_sec,/* secondary => all head */
- sm750_dual_normal,/* primary => panel head and secondary => crt */
+ sm750_dual_normal,/* primary => panel head and secondary => crt */
- sm750_dual_swap,/* primary => crt head and secondary => panel */
+ sm750_dual_swap,/* primary => crt head and secondary => panel */
};
@@ -61,20 +61,20 @@ struct sm750_state{
int yLCD;
};
-/* sm750_share stands for a presentation of two frame buffer
- that use one sm750 adaptor, it is similar to the super class of lynx_share
- in C++
-*/
+/* sm750_share stands for a presentation of two frame buffer
+ that use one sm750 adaptor, it is similar to the super class of lynx_share
+ in C++
+ */
struct sm750_share{
/* it's better to put lynx_share struct to the first place of sm750_share */
struct lynx_share share;
struct sm750_state state;
int hwCursor;
- /* 0: no hardware cursor
- 1: primary crtc hw cursor enabled,
- 2: secondary crtc hw cursor enabled
- 3: both ctrc hw cursor enabled
+ /* 0: no hardware cursor
+ 1: primary crtc hw cursor enabled,
+ 2: secondary crtc hw cursor enabled
+ 3: both ctrc hw cursor enabled
*/
};
@@ -95,7 +95,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output*, int);
void hw_sm750_crtc_clear(struct lynxfb_crtc*);
void hw_sm750_output_clear(struct lynxfb_output*);
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
- const struct fb_var_screeninfo *var,
- const struct fb_info *info);
+ const struct fb_var_screeninfo *var,
+ const struct fb_info *info);
#endif
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists