| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1434875967-13370-2-git-send-email-pali.rohar@gmail.com>
Date: Sun, 21 Jun 2015 10:39:26 +0200
From: Pali Rohár <pali.rohar@...il.com>
To: Darren Hart <dvhart@...radead.org>,
Matthew Garrett <mjg59@...f.ucam.org>
Cc: platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
Pali Rohár <pali.rohar@...il.com>
Subject: [PATCH 1/4] dell-laptop: Update information about wireless control
Make sure that all existing SMBIOS calls for wireless control are properly
documented. This commit also add new documentation released by Dell.
Signed-off-by: Pali Rohár <pali.rohar@...il.com>
---
drivers/platform/x86/dell-laptop.c | 158 +++++++++++++++++++++++++++---------
1 file changed, 119 insertions(+), 39 deletions(-)
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 83e3d7f..ab89103 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -423,45 +423,125 @@ static inline int dell_smi_error(int value)
}
}
-/* Derived from information in DellWirelessCtl.cpp:
- Class 17, select 11 is radio control. It returns an array of 32-bit values.
-
- Input byte 0 = 0: Wireless information
-
- result[0]: return code
- result[1]:
- Bit 0: Hardware switch supported
- Bit 1: Wifi locator supported
- Bit 2: Wifi is supported
- Bit 3: Bluetooth is supported
- Bit 4: WWAN is supported
- Bit 5: Wireless keyboard supported
- Bits 6-7: Reserved
- Bit 8: Wifi is installed
- Bit 9: Bluetooth is installed
- Bit 10: WWAN is installed
- Bits 11-15: Reserved
- Bit 16: Hardware switch is on
- Bit 17: Wifi is blocked
- Bit 18: Bluetooth is blocked
- Bit 19: WWAN is blocked
- Bits 20-31: Reserved
- result[2]: NVRAM size in bytes
- result[3]: NVRAM format version number
-
- Input byte 0 = 2: Wireless switch configuration
- result[0]: return code
- result[1]:
- Bit 0: Wifi controlled by switch
- Bit 1: Bluetooth controlled by switch
- Bit 2: WWAN controlled by switch
- Bits 3-6: Reserved
- Bit 7: Wireless switch config locked
- Bit 8: Wifi locator enabled
- Bits 9-14: Reserved
- Bit 15: Wifi locator setting locked
- Bits 16-31: Reserved
-*/
+/*
+ * Derived from information in smbios-wireless-ctl:
+ *
+ * cbSelect 17, Value 11
+ *
+ * Return Wireless Info
+ * cbArg1, byte0 = 0x00
+ *
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 Info bit flags:
+ *
+ * 0 Hardware switch supported (1)
+ * 1 WiFi locator supported (1)
+ * 2 WLAN supported (1)
+ * 3 Bluetooth (BT) supported (1)
+ * 4 WWAN supported (1)
+ * 5 Wireless KBD supported (1)
+ * 6 Uw b supported (1)
+ * 7 WiGig supported (1)
+ * 8 WLAN installed (1)
+ * 9 BT installed (1)
+ * 10 WWAN installed (1)
+ * 11 Uw b installed (1)
+ * 12 WiGig installed (1)
+ * 13-15 Reserved (0)
+ * 16 Hardware (HW) switch is On (1)
+ * 17 WLAN disabled (1)
+ * 18 BT disabled (1)
+ * 19 WWAN disabled (1)
+ * 20 Uw b disabled (1)
+ * 21 WiGig disabled (1)
+ * 20-31 Reserved (0)
+ *
+ * cbRes3 NVRAM size in bytes
+ * cbRes4, byte 0 NVRAM format version number
+ *
+ *
+ * Set QuickSet Radio Disable Flag
+ * cbArg1, byte0 = 0x01
+ * cbArg1, byte1
+ * Radio ID value:
+ * 0 Radio Status
+ * 1 WLAN ID
+ * 2 BT ID
+ * 3 WWAN ID
+ * 4 UWB ID
+ * 5 WIGIG ID
+ * cbArg1, byte2 Flag bits:
+ * 0 QuickSet disables radio (1)
+ * 1-7 Reserved (0)
+ *
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 QuickSet (QS) radio disable bit map:
+ * 0 QS disables WLAN
+ * 1 QS disables BT
+ * 2 QS disables WWAN
+ * 3 QS disables UWB
+ * 4 QS disables WIGIG
+ * 5-31 Reserved (0)
+ *
+ * Wireless Switch Configuration
+ * cbArg1, byte0 = 0x02
+ *
+ * cbArg1, byte1
+ * Subcommand:
+ * 0 Get config
+ * 1 Set config
+ * 2 Set WiFi locator enable/disable
+ * cbArg1,byte2
+ * Switch settings (if byte 1==1):
+ * 0 WLAN sw itch control (1)
+ * 1 BT sw itch control (1)
+ * 2 WWAN sw itch control (1)
+ * 3 UWB sw itch control (1)
+ * 4 WiGig sw itch control (1)
+ * 5-7 Reserved (0)
+ * cbArg1, byte2 Enable bits (if byte 1==2):
+ * 0 Enable WiFi locator (1)
+ *
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 QuickSet radio disable bit map:
+ * 0 WLAN controlled by sw itch (1)
+ * 1 BT controlled by sw itch (1)
+ * 2 WWAN controlled by sw itch (1)
+ * 3 UWB controlled by sw itch (1)
+ * 4 WiGig controlled by sw itch (1)
+ * 5-6 Reserved (0)
+ * 7 Wireless sw itch config locked (1)
+ * 8 WiFi locator enabled (1)
+ * 9-14 Reserved (0)
+ * 15 WiFi locator setting locked (1)
+ * 16-31 Reserved (0)
+ *
+ * Read Local Config Data (LCD)
+ * cbArg1, byte0 = 0x10
+ * cbArg1, byte1 NVRAM index low byte
+ * cbArg1, byte2 NVRAM index high byte
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 4 bytes read from LCD[index]
+ * cbRes3 4 bytes read from LCD[index+4]
+ * cbRes4 4 bytes read from LCD[index+8]
+ *
+ * Write Local Config Data (LCD)
+ * cbArg1, byte0 = 0x11
+ * cbArg1, byte1 NVRAM index low byte
+ * cbArg1, byte2 NVRAM index high byte
+ * cbArg2 4 bytes to w rite at LCD[index]
+ * cbArg3 4 bytes to w rite at LCD[index+4]
+ * cbArg4 4 bytes to w rite at LCD[index+8]
+ * cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Populate Local Config Data from NVRAM
+ * cbArg1, byte0 = 0x12
+ * cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Commit Local Config Data to NVRAM
+ * cbArg1, byte0 = 0x13
+ * cbRes1 Standard return codes (0, -1, -2)
+ */
static int dell_rfkill_set(void *data, bool blocked)
{
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists