[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1434970465-12687-3-git-send-email-shobhit.kumar@intel.com>
Date: Mon, 22 Jun 2015 16:24:20 +0530
From: Shobhit Kumar <shobhit.kumar@...el.com>
To: linux-pwm <linux-pwm@...r.kernel.org>,
intel-gfx <intel-gfx@...ts.freedesktop.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
linux-gpio <linux-gpio@...r.kernel.org>
Cc: Paul Bolle <pebolle@...cali.nl>,
Jani Nikula <jani.nikula@...el.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Alexandre Courbot <gnurou@...il.com>,
David Airlie <airlied@...ux.ie>,
Povilas Staniulis <wdmonster@...il.com>,
Chih-Wei Huang <cwhuang@...roid-x86.org>,
Thierry Reding <thierry.reding@...il.com>,
Daniel Vetter <daniel.vetter@...el.com>,
Lee Jones <lee.jones@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
bloften80@...il.com, Shobhit Kumar <shobhit.kumar@...el.com>
Subject: [v2 2/7] mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal
On some Intel SoC platforms, the panel enable/disable signals are
controlled by CRC PMIC. Add those control as a new GPIO in a lookup
table for gpio-crystalcove chip during CRC driver load
v2: Make the lookup table static (Thierry)
Remove the lookup table during driver remove (Thierry)
v3: Correct the subject line (Lee jones)
CC: Samuel Ortiz <sameo@...ux.intel.com>
Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: Alexandre Courbot <gnurou@...il.com>
Cc: Thierry Reding <thierry.reding@...il.com>
Acked-by: Lee Jones <lee.jones@...aro.org>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Shobhit Kumar <shobhit.kumar@...el.com>
---
drivers/mfd/intel_soc_pmic_core.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
index 7b50b6b..f3d918e 100644
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -24,8 +24,19 @@
#include <linux/acpi.h>
#include <linux/regmap.h>
#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/gpio/machine.h>
#include "intel_soc_pmic_core.h"
+/* Lookup table for the Panel Enable/Disable line as GPIO signals */
+static struct gpiod_lookup_table panel_gpio_table = {
+ /* Intel GFX is consumer */
+ .dev_id = "0000:00:02.0",
+ .table = {
+ /* Panel EN/DISABLE */
+ GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
+ },
+};
+
static int intel_soc_pmic_find_gpio_irq(struct device *dev)
{
struct gpio_desc *desc;
@@ -85,6 +96,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
if (ret)
dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
+ /* Add lookup table binding for Panel Control to the GPIO Chip */
+ gpiod_add_lookup_table(&panel_gpio_table);
+
ret = mfd_add_devices(dev, -1, config->cell_dev,
config->n_cell_devs, NULL, 0,
regmap_irq_get_domain(pmic->irq_chip_data));
@@ -104,6 +118,9 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+ /* Remove lookup table for Panel Control from the GPIO Chip */
+ gpiod_remove_lookup_table(&panel_gpio_table);
+
mfd_remove_devices(&i2c->dev);
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists