| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1435060743-5511-8-git-send-email-kishon@ti.com>
Date: Tue, 23 Jun 2015 17:28:52 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: <bcousson@...libre.com>, <tony@...mide.com>, <balbi@...com>,
<rogerq@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-usb@...r.kernel.org>, <kishon@...com>
CC: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux@....linux.org.uk>, <gregkh@...uxfoundation.org>,
<nsekhar@...com>
Subject: [PATCH 07/17] usb: musb: omap2430: use *syscon* framework to write to mailbox register
Deprecate using phy-omap-control driver to write to the mailbox register
and start using *syscon* framework to do the same.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 7 +-
drivers/usb/musb/omap2430.c | 118 ++++++++++++++++----
2 files changed, 102 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 38d9bb8..c001306 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -20,10 +20,15 @@ OMAP MUSB GLUE
- phy-names : the names of the PHY corresponding to the PHYs present in the
*phy* phandle.
-Optional properties:
+Optional Properties:
+Deprecated properties:
- ctrl-module : phandle of the control module this glue uses to write to
mailbox
+Recommended properies:
+ - syscon-otghs : phandle/offset pair. Phandle to the system control module and the
+ register offset of the mailbox.
+
SOC specific device node entry
usb_otg_hs: usb_otg_hs@...ab000 {
compatible = "ti,omap4-musb";
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index cc752d8..bcd6d1e 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -39,16 +39,27 @@
#include <linux/usb/musb-omap.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include "musb_core.h"
#include "omap2430.h"
+#define OMAP2430_MUSB_MODE_MASK 0x1f
+#define OMAP2430_MUSB_AVALID (0x1 << 0)
+#define OMAP2430_MUSB_BVALID (0x1 << 1)
+#define OMAP2430_MUSB_VBUSVALID (0x1 << 2)
+#define OMAP2430_MUSB_SESSEND (0x1 << 3)
+#define OMAP2430_MUSB_IDDIG (0x1 << 4)
+
struct omap2430_glue {
struct device *dev;
struct platform_device *musb;
enum omap_musb_vbus_id_status status;
struct work_struct omap_musb_mailbox_work;
struct device *control_otghs;
+ struct regmap *syscon_otghs; /* ctrl. reg. acces */
+ unsigned int otghs_reg; /* otghs reg. index within syscon */
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
@@ -253,6 +264,47 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
}
EXPORT_SYMBOL_GPL(omap_musb_mailbox);
+static void omap2430_musb_set_usbmode(struct omap2430_glue *glue,
+ enum omap_control_usb_mode mode)
+{
+ u32 val;
+ int ret;
+
+ if (glue->syscon_otghs) {
+ switch (mode) {
+ case USB_MODE_HOST:
+ val = OMAP2430_MUSB_AVALID | OMAP2430_MUSB_VBUSVALID;
+ break;
+
+ case USB_MODE_DEVICE:
+ val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_AVALID |
+ OMAP2430_MUSB_VBUSVALID;
+ break;
+
+ case USB_MODE_DISCONNECT:
+ val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_SESSEND;
+ break;
+
+ default:
+ dev_dbg(glue->dev, "Invalid mode\n");
+ goto err_regmap_update;
+ }
+
+ ret = regmap_update_bits(glue->syscon_otghs,
+ glue->otghs_reg,
+ OMAP2430_MUSB_MODE_MASK, val);
+ if (ret < 0)
+ goto err_regmap_update;
+ } else {
+ omap_control_usb_set_mode(glue->control_otghs, mode);
+ }
+
+ return;
+
+err_regmap_update:
+ dev_err(glue->dev, "Failed to set mode to %d\n", mode);
+}
+
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
{
struct musb *musb = glue_to_musb(glue);
@@ -270,8 +322,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
pm_runtime_get_sync(dev);
- omap_control_usb_set_mode(glue->control_otghs,
- USB_MODE_HOST);
+ omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
omap2430_musb_set_vbus(musb, 1);
}
break;
@@ -284,7 +335,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
musb->xceiv->last_event = USB_EVENT_VBUS;
if (musb->gadget_driver)
pm_runtime_get_sync(dev);
- omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
+ omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
break;
case OMAP_MUSB_ID_FLOAT:
@@ -301,8 +352,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
if (data->interface_type == MUSB_INTERFACE_UTMI)
otg_set_vbus(musb->xceiv->otg, 0);
- omap_control_usb_set_mode(glue->control_otghs,
- USB_MODE_DISCONNECT);
+ omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
break;
default:
dev_dbg(dev, "ID float\n");
@@ -444,7 +494,7 @@ static void omap2430_musb_enable(struct musb *musb)
switch (glue->status) {
case OMAP_MUSB_ID_GROUND:
- omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
+ omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
if (data->interface_type != MUSB_INTERFACE_UTMI)
break;
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -463,7 +513,7 @@ static void omap2430_musb_enable(struct musb *musb)
break;
case OMAP_MUSB_VBUS_VALID:
- omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
+ omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
break;
default:
@@ -477,8 +527,7 @@ static void omap2430_musb_disable(struct musb *musb)
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
if (glue->status != OMAP_MUSB_UNKNOWN)
- omap_control_usb_set_mode(glue->control_otghs,
- USB_MODE_DISCONNECT);
+ omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
}
static int omap2430_musb_exit(struct musb *musb)
@@ -507,6 +556,40 @@ static const struct musb_platform_ops omap2430_ops = {
static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+static int omap2430_get_control(struct omap2430_glue *glue,
+ struct device_node *np)
+{
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
+ glue->syscon_otghs = syscon_regmap_lookup_by_phandle(np,
+ "syscon-otghs");
+ if (IS_ERR(glue->syscon_otghs)) {
+ dev_info(glue->dev, "can't get syscon, using control device\n");
+ glue->syscon_otghs = NULL;
+
+ control_node = of_parse_phandle(np, "ctrl-module", 0);
+ if (control_node) {
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(glue->dev,
+ "Failed to get control device\n");
+ return -EINVAL;
+ }
+ glue->control_otghs = &control_pdev->dev;
+ }
+ } else {
+ if (of_property_read_u32_index(np, "syscon-otghs", 1,
+ &glue->otghs_reg)) {
+ dev_err(glue->dev,
+ "couldn't get otghs reg. offset\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int omap2430_probe(struct platform_device *pdev)
{
struct resource musb_resources[3];
@@ -538,9 +621,6 @@ static int omap2430_probe(struct platform_device *pdev)
glue->control_otghs = ERR_PTR(-ENODEV);
if (np) {
- struct device_node *control_node;
- struct platform_device *control_pdev;
-
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
goto err2;
@@ -567,16 +647,10 @@ static int omap2430_probe(struct platform_device *pdev)
pdata->board_data = data;
pdata->config = config;
- control_node = of_parse_phandle(np, "ctrl-module", 0);
- if (control_node) {
- control_pdev = of_find_device_by_node(control_node);
- if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
- ret = -EINVAL;
- goto err2;
- }
- glue->control_otghs = &control_pdev->dev;
- }
+ ret = omap2430_get_control(glue, np);
+ if (ret)
+ goto err2;
+
}
pdata->platform_ops = &omap2430_ops;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists