[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150624161423.GO19530@localhost>
Date: Wed, 24 Jun 2015 21:44:23 +0530
From: Vinod Koul <vinod.koul@...el.com>
To: Paul Osmialowski <pawelo@...g.net.pl>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Anson Huang <b20788@...escale.com>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Bhupesh Sharma <bhupesh.sharma@...escale.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Frank Li <Frank.Li@...escale.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Guenter Roeck <linux@...ck-us.net>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Jingchang Lu <jingchang.lu@...escale.com>,
Jiri Slaby <jslaby@...e.cz>, Kees Cook <keescook@...omium.org>,
Kumar Gala <galak@...eaurora.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Linus Walleij <linus.walleij@...aro.org>,
Magnus Damm <damm+renesas@...nsource.se>,
Michael Turquette <mturquette@...libre.com>,
Nathan Lynch <nathan_lynch@...tor.com>,
Nicolas Pitre <nico@...aro.org>,
Maxime Coquelin stm32 <mcoquelin.stm32@...il.com>,
Olof Johansson <olof@...om.net>,
Paul Bolle <pebolle@...cali.nl>,
Rob Herring <r.herring@...escale.com>,
Rob Herring <robh+dt@...nel.org>,
Russell King <linux@....linux.org.uk>,
Sergey Senozhatsky <sergey.senozhatsky@...il.com>,
Shawn Guo <shawn.guo@...aro.org>,
Simon Horman <horms+renesas@...ge.net.au>,
Stefan Agner <stefan@...er.ch>,
Stephen Boyd <sboyd@...eaurora.org>,
Thomas Gleixner <tglx@...utronix.de>,
Uwe Kleine-Koenig <u.kleine-koenig@...gutronix.de>,
Catalin Marinas <catalin.marinas@....com>,
Dave Martin <Dave.Martin@....com>,
Mark Rutland <mark.rutland@....com>,
Pawel Moll <pawel.moll@....com>, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-serial@...r.kernel.org,
devicetree@...r.kernel.org, dmaengine@...r.kernel.org,
Yuri Tikhonov <yur@...raft.com>,
Sergei Poselenov <sposelenov@...raft.com>,
Dmitry Cherkassov <d_cherkasov@...raft.com>,
Alexander Potashev <aspotashev@...raft.com>
Subject: Re: [PATCH 8/9] arm: twr-k70f120m: extend Freescale eDMA driver with
ability to support Kinetis SoC
On Tue, Jun 23, 2015 at 11:19:46PM +0200, Paul Osmialowski wrote:
> Surprisingly small amount of work was required in order to extend already
> existing eDMA driver with the support for Kinetis SoC architecture.
>
> Note that <mach/memory.h> is needed (which is denoted by
> CONFIG_NEED_MACH_MEMORY_H) as it provides macros required for proper
> operation of DMA allocation functions.
>
> Signed-off-by: Paul Osmialowski <pawelo@...g.net.pl>
> ---
> Documentation/devicetree/bindings/dma/fsl-edma.txt | 38 +++++++++-
> arch/arm/Kconfig | 4 ++
> arch/arm/boot/dts/kinetis.dtsi | 34 +++++++++
> arch/arm/mach-kinetis/include/mach/memory.h | 61 ++++++++++++++++
> drivers/clk/clk-kinetis.c | 15 ++++
> drivers/dma/fsl-edma.c | 81 +++++++++++++++++++++-
> include/dt-bindings/clock/kinetis-mcg.h | 5 +-
having so many change into one patch is not a great idea, please breka them
up. I am looking for single/multiple patches which only touch dmaengine
files
> +#ifdef CONFIG_ARCH_KINETIS
> +static const char * const txirq_names[] = {
> + "edma-tx-0,16",
> + "edma-tx-1,17",
> + "edma-tx-2,18",
> + "edma-tx-3,19",
> + "edma-tx-4,20",
> + "edma-tx-5,21",
> + "edma-tx-6,22",
> + "edma-tx-7,23",
> + "edma-tx-8,24",
> + "edma-tx-9,25",
> + "edma-tx-10,26",
> + "edma-tx-11,27",
> + "edma-tx-12,28",
> + "edma-tx-13,29",
> + "edma-tx-14,30",
> + "edma-tx-15,31",
> +};
why do we need this array, these seem to come from DT, right?
> +#endif
> +
> struct fsl_edma_engine {
> struct dma_device dma_dev;
> void __iomem *membase;
> +#ifdef CONFIG_ARCH_KINETIS
> + struct clk *clk;
> +#endif
> void __iomem *muxbase[DMAMUX_NR];
> struct clk *muxclk[DMAMUX_NR];
> struct mutex fsl_edma_mutex;
> u32 n_chans;
> +#ifdef CONFIG_ARCH_KINETIS
> + int txirq[ARRAY_SIZE(txirq_names)];
> +#else
> int txirq;
> +#endif
> int errirq;
> bool big_endian;
> struct fsl_edma_chan chans[];
we can define these bits and only be used on kinetis machines?
> @@ -709,6 +737,7 @@ static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +#ifndef CONFIG_ARCH_KINETIS
> static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
> {
> if (fsl_edma_tx_handler(irq, dev_id) == IRQ_HANDLED)
> @@ -716,6 +745,7 @@ static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
>
> return fsl_edma_err_handler(irq, dev_id);
> }
> +#endif
>
> static void fsl_edma_issue_pending(struct dma_chan *chan)
> {
> @@ -788,15 +818,29 @@ static void fsl_edma_free_chan_resources(struct dma_chan *chan)
> }
>
> static int
> -fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
> +fsl_edma_irq_init(struct platform_device *pdev,
> + struct fsl_edma_engine *fsl_edma)
> {
> int ret;
> +#ifdef CONFIG_ARCH_KINETIS
> + int i;
>
> + for (i = 0; i < ARRAY_SIZE(txirq_names); i++) {
> + fsl_edma->txirq[i] = platform_get_irq_byname(pdev,
> + txirq_names[i]);
> + if (fsl_edma->txirq[i] < 0) {
> + dev_err(&pdev->dev, "Can't get %s irq.\n",
> + txirq_names[i]);
> + return fsl_edma->txirq[i];
> + }
> + }
> +#else
> fsl_edma->txirq = platform_get_irq_byname(pdev, "edma-tx");
> if (fsl_edma->txirq < 0) {
> dev_err(&pdev->dev, "Can't get edma-tx irq.\n");
> return fsl_edma->txirq;
> }
> +#endif
can you have two routines and with one of them onvoked based on machine type
which should be configured based on DT data rather
>
> fsl_edma->errirq = platform_get_irq_byname(pdev, "edma-err");
> if (fsl_edma->errirq < 0) {
> @@ -804,6 +848,16 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
> return fsl_edma->errirq;
> }
>
> +#ifdef CONFIG_ARCH_KINETIS
> + for (i = 0; i < ARRAY_SIZE(txirq_names); i++) {
> + ret = devm_request_irq(&pdev->dev, fsl_edma->txirq[i],
> + fsl_edma_tx_handler, 0, txirq_names[i], fsl_edma);
> + if (ret) {
> + dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n");
> + return ret;
> + }
> + }
> +#else
> if (fsl_edma->txirq == fsl_edma->errirq) {
> ret = devm_request_irq(&pdev->dev, fsl_edma->txirq,
> fsl_edma_irq_handler, 0, "eDMA", fsl_edma);
> @@ -818,6 +872,7 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
> dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n");
> return ret;
> }
> +#endif
only one of them will be populated so if-else should work too
please get rid of these ifdef stuff and make it based on DT data based flags
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists