| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3228158.O80YglnvCi@xps13>
Date: Sat, 27 Jun 2015 13:34:30 +0200
From: Gabriele Mazzotta <gabriele.mzt@...il.com>
To: Pali Rohár <pali.rohar@...il.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Guenter Roeck <linux@...ck-us.net>,
Arnd Bergmann <arnd@...db.de>, Jean Delvare <jdelvare@...e.de>,
Steven Honeyman <stevenhoneyman@...il.com>,
Valdis.Kletnieks@...edu,
Jochen Eisinger <jochen@...guin-breeder.org>,
linux-kernel@...r.kernel.org, lm-sensors@...sensors.org
Subject: Re: [PATCH v3 2/2] hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k
Hi Pali,
I've just noticed an issue with this patch. See the comment here below.
Gabriele
On Wednesday 29 April 2015 13:41:26 Pali Rohár wrote:
> This patch splits CONFIG_I8K compile option to SENSORS_DELL_SMM and CONFIG_I8K.
> Option SENSORS_DELL_SMM is now used to enable compilation of dell-smm-hwmon
> driver and old CONFIG_I8K option to enable /proc/i8k interface in driver.
>
> So this change allows to compile dell-smm-hwmon driver without legacy /proc/i8k
> interface which is needed only for old Dell Inspirion models or for userspace
> i8kutils package.
>
> For backward compatibility when CONFIG_I8K is enabled then also SENSORS_DELL_SMM
> is enabled and so driver dell-smm-hwmon (with /proc/i8k) is compiled.
>
> Signed-off-by: Pali Rohár <pali.rohar@...il.com>
> ---
> arch/x86/Kconfig | 25 +++----
> drivers/hwmon/Kconfig | 11 +++
> drivers/hwmon/Makefile | 2 +-
> drivers/hwmon/dell-smm-hwmon.c | 150 ++++++++++++++++++++++------------------
> 4 files changed, 106 insertions(+), 82 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 226d569..7b756b3 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1055,24 +1055,19 @@ config TOSHIBA
> Say N otherwise.
>
> config I8K
> - tristate "Dell laptop support"
> + tristate "Dell i8k legacy laptop support"
> select HWMON
> + select SENSORS_DELL_SMM
> ---help---
> - This adds a driver to safely access the System Management Mode
> - of the CPU on the Dell Inspiron 8000. The System Management Mode
> - is used to read cpu temperature and cooling fan status and to
> - control the fans on the I8K portables.
> + This option enables legacy /proc/i8k userspace interface in hwmon
> + dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
> + temperature and allows controlling fan speeds of Dell laptops via
> + System Management Mode. For old Dell laptops (like Dell Inspiron 8000)
> + it reports also power and hotkey status. For fan speed control is
> + needed userspace package i8kutils.
>
> - This driver has been tested only on the Inspiron 8000 but it may
> - also work with other Dell laptops. You can force loading on other
> - models by passing the parameter `force=1' to the module. Use at
> - your own risk.
> -
> - For information on utilities to make use of this driver see the
> - I8K Linux utilities web site at:
> - <http://people.debian.org/~dz/i8k/>
> -
> - Say Y if you intend to run this kernel on a Dell Inspiron 8000.
> + Say Y if you intend to run this kernel on old Dell laptops or want to
> + use userspace package i8kutils.
> Say N otherwise.
>
> config X86_REBOOTFIXUPS
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 25d9e72..714f92a 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -371,6 +371,17 @@ config SENSORS_DS1621
> This driver can also be built as a module. If so, the module
> will be called ds1621.
>
> +config SENSORS_DELL_SMM
> + tristate "Dell laptop SMM BIOS hwmon driver"
> + depends on X86 && DMI
> + help
> + This hwmon driver adds support for reporting temperature of different
> + sensors and controls the fans on Dell laptops via System Management
> + Mode provided by Dell BIOS.
> +
> + When option I8K is also enabled this driver provides legacy /proc/i8k
> + userspace interface for i8kutils package.
> +
> config SENSORS_DA9052_ADC
> tristate "Dialog DA9052/DA9053 ADC"
> depends on PMIC_DA9052
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 51533ac..6cacd0f 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
> obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
> obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
> obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
> +obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o
> obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
> obj-$(CONFIG_SENSORS_DS620) += ds620.o
> obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
> @@ -156,7 +157,6 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
> obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
> obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
> obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
> -obj-$(CONFIG_I8K) += dell-smm-hwmon.o
>
> obj-$(CONFIG_PMBUS) += pmbus/
>
> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> index 65d314b..2a80882 100644
> --- a/drivers/hwmon/dell-smm-hwmon.c
> +++ b/drivers/hwmon/dell-smm-hwmon.c
> @@ -81,7 +81,7 @@ static uint i8k_fan_max = I8K_FAN_HIGH;
>
> MODULE_AUTHOR("Massimo Dal Zotto (dz@...ian.org)");
> MODULE_AUTHOR("Pali Rohár <pali.rohar@...il.com>");
> -MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
> +MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
> MODULE_LICENSE("GPL");
> MODULE_ALIAS("i8k");
>
> @@ -93,6 +93,7 @@ static bool ignore_dmi;
> module_param(ignore_dmi, bool, 0);
> MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
>
> +#if IS_ENABLED(CONFIG_I8K)
> static bool restricted;
> module_param(restricted, bool, 0);
> MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
> @@ -100,6 +101,7 @@ MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
> static bool power_status;
> module_param(power_status, bool, 0600);
> MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
> +#endif
>
> static uint fan_mult;
> module_param(fan_mult, uint, 0);
> @@ -109,18 +111,6 @@ static uint fan_max;
> module_param(fan_max, uint, 0);
> MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");
>
> -static int i8k_open_fs(struct inode *inode, struct file *file);
> -static long i8k_ioctl(struct file *, unsigned int, unsigned long);
> -
> -static const struct file_operations i8k_fops = {
> - .owner = THIS_MODULE,
> - .open = i8k_open_fs,
> - .read = seq_read,
> - .llseek = seq_lseek,
> - .release = single_release,
> - .unlocked_ioctl = i8k_ioctl,
> -};
> -
> struct smm_regs {
> unsigned int eax;
> unsigned int ebx __packed;
> @@ -221,45 +211,6 @@ out:
> }
>
> /*
> - * Read the Fn key status.
> - */
> -static int i8k_get_fn_status(void)
> -{
> - struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, };
> - int rc;
> -
> - rc = i8k_smm(®s);
> - if (rc < 0)
> - return rc;
> -
> - switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) {
> - case I8K_FN_UP:
> - return I8K_VOL_UP;
> - case I8K_FN_DOWN:
> - return I8K_VOL_DOWN;
> - case I8K_FN_MUTE:
> - return I8K_VOL_MUTE;
> - default:
> - return 0;
> - }
> -}
> -
> -/*
> - * Read the power status.
> - */
> -static int i8k_get_power_status(void)
> -{
> - struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, };
> - int rc;
> -
> - rc = i8k_smm(®s);
> - if (rc < 0)
> - return rc;
> -
> - return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
> -}
> -
> -/*
> * Read the fan status.
> */
> static int i8k_get_fan_status(int fan)
> @@ -378,6 +329,51 @@ static int i8k_get_dell_signature(int req_fn)
> return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1;
> }
>
> +#if IS_ENABLED(CONFIG_I8K)
> +
> +/*
> + * Read the Fn key status.
> + */
> +static int i8k_get_fn_status(void)
> +{
> + struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, };
> + int rc;
> +
> + rc = i8k_smm(®s);
> + if (rc < 0)
> + return rc;
> +
> + switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) {
> + case I8K_FN_UP:
> + return I8K_VOL_UP;
> + case I8K_FN_DOWN:
> + return I8K_VOL_DOWN;
> + case I8K_FN_MUTE:
> + return I8K_VOL_MUTE;
> + default:
> + return 0;
> + }
> +}
> +
> +/*
> + * Read the power status.
> + */
> +static int i8k_get_power_status(void)
> +{
> + struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, };
> + int rc;
> +
> + rc = i8k_smm(®s);
> + if (rc < 0)
> + return rc;
> +
> + return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
> +}
> +
> +/*
> + * Procfs interface
> + */
> +
> static int
> i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
> {
> @@ -528,6 +524,37 @@ static int i8k_open_fs(struct inode *inode, struct file *file)
> return single_open(file, i8k_proc_show, NULL);
> }
>
> +static const struct file_operations i8k_fops = {
> + .owner = THIS_MODULE,
> + .open = i8k_open_fs,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> + .unlocked_ioctl = i8k_ioctl,
> +};
> +
> +static void __init i8k_init_procfs(void)
> +{
> + /* Register the proc entry */
> + proc_create("i8k", 0, NULL, &i8k_fops);
> +}
> +
> +static void __exit i8k_exit_procfs(void)
> +{
> + remove_proc_entry("i8k", NULL);
> +}
> +
> +#else
> +
> +static inline void __init i8k_init_procfs(void)
> +{
> +}
> +
> +static inline void __exit i8k_exit_procfs(void)
> +{
> +}
> +
> +#endif
>
> /*
> * Hwmon interface
> @@ -750,8 +777,8 @@ static int __init i8k_init_hwmon(void)
> if (err >= 0)
> i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2;
>
> - i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "i8k", NULL,
> - i8k_groups);
> + i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "dell-smm",
> + NULL, i8k_groups);
dell-smm is not a valid name, see hwmon_device_register_with_groups() for
more info (dash not allowed). Because of this, the driver can't be loaded.
> if (IS_ERR(i8k_hwmon_dev)) {
> err = PTR_ERR(i8k_hwmon_dev);
> i8k_hwmon_dev = NULL;
> @@ -976,33 +1003,24 @@ static int __init i8k_probe(void)
>
> static int __init i8k_init(void)
> {
> - struct proc_dir_entry *proc_i8k;
> int err;
>
> /* Are we running on an supported laptop? */
> if (i8k_probe())
> return -ENODEV;
>
> - /* Register the proc entry */
> - proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops);
> - if (!proc_i8k)
> - return -ENOENT;
> -
> err = i8k_init_hwmon();
> if (err)
> - goto exit_remove_proc;
> + return err;
>
> + i8k_init_procfs();
> return 0;
> -
> - exit_remove_proc:
> - remove_proc_entry("i8k", NULL);
> - return err;
> }
>
> static void __exit i8k_exit(void)
> {
> hwmon_device_unregister(i8k_hwmon_dev);
> - remove_proc_entry("i8k", NULL);
> + i8k_exit_procfs();
> }
>
> module_init(i8k_init);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists