| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1435600536-13135-4-git-send-email-juston.h.li@gmail.com>
Date: Mon, 29 Jun 2015 10:55:21 -0700
From: Juston Li <juston.h.li@...il.com>
To: sudipm.mukherjee@...il.com, teddy.wang@...iconmotion.com,
gregkh@...uxfoundation.org, linux-fbdev@...r.kernel.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
dan.carpenter@...cle.com
Cc: Juston Li <juston.h.li@...il.com>
Subject: [PATCH v4 04/19] staging: sm750fb: add space before open parenthesis
Fixes checkpatch.pl error:
ERROR: space required before the open parenthesis '('
Signed-off-by: Juston Li <juston.h.li@...il.com>
---
drivers/staging/sm750fb/ddk750_display.c | 20 +++++------
drivers/staging/sm750fb/ddk750_dvi.c | 2 +-
drivers/staging/sm750fb/ddk750_help.c | 2 +-
drivers/staging/sm750fb/ddk750_mode.c | 12 +++----
drivers/staging/sm750fb/ddk750_power.c | 6 ++--
drivers/staging/sm750fb/sm750_accel.c | 8 ++---
drivers/staging/sm750fb/sm750_cursor.c | 32 ++++++++---------
drivers/staging/sm750fb/sm750_help.h | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 62 ++++++++++++++++----------------
9 files changed, 73 insertions(+), 73 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 1c4049f..973dec3 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -49,7 +49,7 @@ static void setDisplayControl(int ctrl, int dispState)
{
cnt++;
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
- } while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) !=
+ } while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) !=
(ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Panel Plane enbit:after tried %d times\n", cnt);
}
@@ -104,7 +104,7 @@ static void setDisplayControl(int ctrl, int dispState)
{
cnt++;
POKE32(CRT_DISPLAY_CTRL, ulDisplayCtrlReg);
- } while((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !=
+ } while ((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !=
(ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Crt Plane enbit:after tried %d times\n", cnt);
}
@@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
- if(!ctrl){
+ if (!ctrl){
/* primary controller */
/* Do not wait when the Primary PLL is off or display control is already off.
@@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
- if(output & PNL_2_USAGE){
+ if (output & PNL_2_USAGE){
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET);
POKE32(PANEL_DISPLAY_CTRL, reg);
}
- if(output & CRT_2_USAGE){
+ if (output & CRT_2_USAGE){
/* set crt path controller select */
reg = PEEK32(CRT_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET);
@@ -250,25 +250,25 @@ void ddk750_setLogicalDispOut(disp_output_t output)
}
- if(output & PRI_TP_USAGE){
+ if (output & PRI_TP_USAGE){
/* set primary timing and plane en_bit */
setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
}
- if(output & SEC_TP_USAGE){
+ if (output & SEC_TP_USAGE){
/* set secondary timing and plane en_bit*/
setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
}
- if(output & PNL_SEQ_USAGE){
+ if (output & PNL_SEQ_USAGE){
/* set panel sequence */
swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
}
- if(output & DAC_USAGE)
+ if (output & DAC_USAGE)
setDAC((output & DAC_MASK)>>DAC_OFFSET);
- if(output & DPMS_USAGE)
+ if (output & DPMS_USAGE)
ddk750_setDPMS((output & DPMS_MASK) >> DPMS_OFFSET);
}
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 35866fa..4c64436 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -45,7 +45,7 @@ int dviInit(
{
dvi_ctrl_device_t *pCurrentDviCtrl;
pCurrentDviCtrl = g_dcftSupportedDviController;
- if(pCurrentDviCtrl->pfnInit != NULL)
+ if (pCurrentDviCtrl->pfnInit != NULL)
{
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
diff --git a/drivers/staging/sm750fb/ddk750_help.c b/drivers/staging/sm750fb/ddk750_help.c
index 1adcafc..93ed958 100644
--- a/drivers/staging/sm750fb/ddk750_help.c
+++ b/drivers/staging/sm750fb/ddk750_help.c
@@ -10,7 +10,7 @@ void ddk750_set_mmio(void __iomem *addr, unsigned short devId, char revId)
mmio750 = addr;
devId750 = devId;
revId750 = revId;
- if(revId == 0xfe)
+ if (revId == 0xfe)
printk("found sm750le\n");
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 4ee9ceb..cfe528c 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,7 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
int ret = 0;
int cnt = 0;
unsigned int ulTmpValue, ulReg;
- if(pll->clockType == SECONDARY_PLL)
+ if (pll->clockType == SECONDARY_PLL)
{
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
@@ -107,7 +107,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
- if(getChipType() == SM750LE){
+ if (getChipType() == SM750LE){
displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
}else{
ulReg = PEEK32(CRT_DISPLAY_CTRL)
@@ -120,7 +120,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
}
}
- else if(pll->clockType == PRIMARY_PLL)
+ else if (pll->clockType == PRIMARY_PLL)
{
unsigned int ulReservedBits;
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
@@ -170,10 +170,10 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
#if 1
- while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg))
+ while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg))
{
cnt++;
- if(cnt > 1000)
+ if (cnt > 1000)
break;
POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
}
@@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
pll.clockType = clock;
uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
- if(getChipType() == SM750LE){
+ if (getChipType() == SM750LE){
/* set graphic mode via IO method */
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 44b8eb1..a2d9ee6 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,7 +5,7 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
- if(getChipType() == SM750LE){
+ if (getChipType() == SM750LE){
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
}else{
@@ -17,7 +17,7 @@ void ddk750_setDPMS(DPMS_t state)
unsigned int getPowerMode(void)
{
- if(getChipType() == SM750LE)
+ if (getChipType() == SM750LE)
return 0;
return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
}
@@ -33,7 +33,7 @@ void setPowerMode(unsigned int powerMode)
control_value = PEEK32(POWER_MODE_CTRL);
- if(getChipType() == SM750LE)
+ if (getChipType() == SM750LE)
return;
switch (powerMode)
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index ed82813..3c61103 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -96,7 +96,7 @@ int hw_fillrect(struct lynx_accel *accel,
{
u32 deCtrl;
- if(accel->de_wait() != 0)
+ if (accel->de_wait() != 0)
{
/* int time wait and always busy,seems hardware
* got something error */
@@ -248,7 +248,7 @@ unsigned int rop2) /* ROP value */
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if(Bpp == 3){
+ if (Bpp == 3){
sx *= 3;
dx *= 3;
width *= 3;
@@ -344,7 +344,7 @@ int hw_imageblit(struct lynx_accel *accel,
ul4BytesPerScan = ulBytesPerScan & ~3;
ulBytesRemain = ulBytesPerScan & 3;
- if(accel->de_wait() != 0)
+ if (accel->de_wait() != 0)
{
return -1;
}
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if(bytePerPixel == 3){
+ if (bytePerPixel == 3){
dx *= 3;
width *= 3;
startBit *= 3;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 405e24b..95cfb8f 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,7 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
odd=0;
*/
- for(i=0;i<count;i++)
+ for (i=0;i<count;i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -132,15 +132,15 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
* but method 2 shows no lag
* and method 1 seems a bit wrong*/
#if 0
- if(rop == ROP_XOR)
+ if (rop == ROP_XOR)
opr = mask ^ color;
else
opr = mask & color;
- for(j=0;j<8;j++)
+ for (j=0;j<8;j++)
{
- if(opr & (0x80 >> j))
+ if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
@@ -149,9 +149,9 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
}
}
#else
- for(j=0;j<8;j++){
- if(mask & (0x80>>j)){
- if(rop == ROP_XOR)
+ for (j=0;j<8;j++){
+ if (mask & (0x80>>j)){
+ if (rop == ROP_XOR)
opr = mask ^ color;
else
opr = mask & color;
@@ -165,9 +165,9 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
/* assume pitch is 1,2,4,8,...*/
#if 0
- if(!((i+1)&(pitch-1))) /* below line equal to is line */
+ if (!((i+1)&(pitch-1))) /* below line equal to is line */
#else
- if((i+1) % pitch == 0)
+ if ((i+1) % pitch == 0)
#endif
{
/* need a return */
@@ -204,7 +204,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
pstart = cursor->vstart;
pbuffer = pstart;
- for(i=0;i<count;i++)
+ for (i=0;i<count;i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -212,15 +212,15 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
/* either method below works well, but method 2 shows no lag */
#if 0
- if(rop == ROP_XOR)
+ if (rop == ROP_XOR)
opr = mask ^ color;
else
opr = mask & color;
- for(j=0;j<8;j++)
+ for (j=0;j<8;j++)
{
- if(opr & (0x80 >> j))
+ if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
@@ -229,15 +229,15 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
}
}
#else
- for(j=0;j<8;j++){
- if(mask & (1<<j))
+ for (j=0;j<8;j++){
+ if (mask & (1<<j))
data |= ((color & (1<<j))?1:2)<<(j*2);
}
#endif
iowrite16(data, pbuffer);
/* assume pitch is 1,2,4,8,...*/
- if(!(i&(pitch-1)))
+ if (!(i&(pitch-1)))
{
/* need a return */
pstart += offset;
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index 8ba4f8d..544ac41 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -73,7 +73,7 @@
static inline unsigned int absDiff(unsigned int a, unsigned int b)
{
- if(a<b)
+ if (a<b)
return b-a;
else
return a-b;
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 28db9c7..5abac9b 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -44,7 +44,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
* successfully
* */
- if((ret = pci_request_region(pdev, 1, "sm750fb")))
+ if ((ret = pci_request_region(pdev, 1, "sm750fb")))
{
pr_err("Can not request PCI regions.\n");
goto exit;
@@ -52,7 +52,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* now map mmio and vidmem*/
share->pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size);
- if(!share->pvReg){
+ if (!share->pvReg){
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
@@ -78,7 +78,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* reserve the vidmem space of smi adaptor */
#if 0
- if((ret = pci_request_region(pdev, 0, _moduleName_)))
+ if ((ret = pci_request_region(pdev, 0, _moduleName_)))
{
pr_err("Can not request PCI regions.\n");
goto exit;
@@ -87,7 +87,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
share->pvMem = ioremap_wc(share->vidmem_start, share->vidmem_size);
- if(!share->pvMem){
+ if (!share->pvMem){
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
@@ -107,19 +107,19 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
- if(parm->chip_clk == 0)
+ if (parm->chip_clk == 0)
parm->chip_clk = (getChipType() == SM750LE)?
DEFAULT_SM750LE_CHIP_CLOCK :
DEFAULT_SM750_CHIP_CLOCK;
- if(parm->mem_clk == 0)
+ if (parm->mem_clk == 0)
parm->mem_clk = parm->chip_clk;
- if(parm->master_clk == 0)
+ if (parm->master_clk == 0)
parm->master_clk = parm->chip_clk/3;
ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
/* for sm718,open pci burst */
- if(share->devid == 0x718){
+ if (share->devid == 0x718){
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON));
}
@@ -130,10 +130,10 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
ddk750_initDVIDisp();
#endif
- if(getChipType() != SM750LE)
+ if (getChipType() != SM750LE)
{
/* does user need CRT ?*/
- if(spec_share->state.nocrt){
+ if (spec_share->state.nocrt){
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -191,7 +191,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
/* init 2d engine */
- if(!share->accel_off){
+ if (!share->accel_off){
hw_sm750_initAccel(share);
}
@@ -228,19 +228,19 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
channel = *output->channel;
- if(getChipType() != SM750LE){
- if(channel == sm750_primary){
+ if (getChipType() != SM750LE){
+ if (channel == sm750_primary){
pr_info("primary channel\n");
- if(output->paths & sm750_panel)
+ if (output->paths & sm750_panel)
dispSet |= do_LCD1_PRI;
- if(output->paths & sm750_crt)
+ if (output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
}else{
pr_info("secondary channel\n");
- if(output->paths & sm750_panel)
+ if (output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
- if(output->paths & sm750_crt)
+ if (output->paths & sm750_crt)
dispSet |= do_CRT_SEC;
}
@@ -308,9 +308,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
#if 1
- if(!share->accel_off){
+ if (!share->accel_off){
/* set 2d engine pixel format according to mode bpp */
- switch(var->bits_per_pixel){
+ switch (var->bits_per_pixel){
case 8:
fmt = 0;
break;
@@ -341,19 +341,19 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
modparm.vertical_total = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
/* choose pll */
- if(crtc->channel != sm750_secondary)
+ if (crtc->channel != sm750_secondary)
clock = PRIMARY_PLL;
else
clock = SECONDARY_PLL;
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
ret = ddk750_setModeTiming(&modparm, clock);
- if(ret){
+ if (ret){
pr_err("Set mode timing failed\n");
goto exit;
}
- if(crtc->channel != sm750_secondary){
+ if (crtc->channel != sm750_secondary){
/* set pitch, offset ,width,start address ,etc... */
POKE32(PANEL_FB_ADDRESS,
FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
@@ -429,7 +429,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
int dpms, crtdb;
- switch(blank)
+ switch (blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
@@ -473,7 +473,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
return -EINVAL;
}
- if(output->paths & sm750_crt){
+ if (output->paths & sm750_crt){
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
@@ -535,13 +535,13 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
break;
}
- if(output->paths & sm750_crt){
+ if (output->paths & sm750_crt){
POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
- if(output->paths & sm750_panel){
+ if (output->paths & sm750_panel){
POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
}
@@ -554,7 +554,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
u32 reg;
enable2DEngine(1);
- if(getChipType() == SM750LE){
+ if (getChipType() == SM750LE){
reg = PEEK32(DE_STATE1);
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
POKE32(DE_STATE1, reg);
@@ -581,9 +581,9 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i=0x10000000;
- while(i--){
+ while (i--){
unsigned int dwVal = PEEK32(DE_STATE2);
- if((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) &&
+ if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) == DE_STATE2_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == DE_STATE2_DE_MEM_FIFO_EMPTY))
{
@@ -598,9 +598,9 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i=0x10000000;
- while(i--){
+ while (i--){
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
- if((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
+ if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
{
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists