lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20150629204629.GB19447@kroah.com>
Date:	Mon, 29 Jun 2015 13:46:29 -0700
From:	Greg KH <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org,
	Andrew Morton <akpm@...ux-foundation.org>,
	torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc:	lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 4.0.7

diff --git a/Makefile b/Makefile
index af6da040b952..bd76a8e94395 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 0
-SUBLEVEL = 6
+SUBLEVEL = 7
 EXTRAVERSION =
 NAME = Hurr durr I'ma sheep
 
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f70eca7ee705..0ef8d4b47102 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -153,6 +153,8 @@ extern void exynos_enter_aftr(void);
 
 extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
 
+extern void exynos_set_delayed_reset_assertion(bool enable);
+
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
 extern void __iomem *cpu_boot_reg_base(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 9e9dfdfad9d7..1081ff1f03c6 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -166,6 +166,33 @@ static void __init exynos_init_io(void)
 	exynos_map_io();
 }
 
+/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
+ * and suspend.
+ *
+ * This is necessary only on Exynos4 SoCs. When system is running
+ * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
+ * feature could properly detect global idle state when secondary CPU is
+ * powered down.
+ *
+ * However this should not be set when such system is going into suspend.
+ */
+void exynos_set_delayed_reset_assertion(bool enable)
+{
+	if (soc_is_exynos4()) {
+		unsigned int tmp, core_id;
+
+		for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
+			tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+			if (enable)
+				tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+			else
+				tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+			pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+		}
+	}
+}
+
 static const struct of_device_id exynos_dt_pmu_match[] = {
 	{ .compatible = "samsung,exynos3250-pmu" },
 	{ .compatible = "samsung,exynos4210-pmu" },
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index d2e9f12d12f1..d45e8cd23925 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -34,30 +34,6 @@
 
 extern void exynos4_secondary_startup(void);
 
-/*
- * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs
- * during hot-(un)plugging CPUx.
- *
- * The feature can be cleared safely during first boot of secondary CPU.
- *
- * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering
- * down a CPU so the CPU idle clock down feature could properly detect global
- * idle state when CPUx is off.
- */
-static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable)
-{
-	if (soc_is_exynos4()) {
-		unsigned int tmp;
-
-		tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
-		if (enable)
-			tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
-		else
-			tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
-		pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
-	}
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 static inline void cpu_leave_lowpower(u32 core_id)
 {
@@ -73,8 +49,6 @@ static inline void cpu_leave_lowpower(u32 core_id)
 	  : "=&r" (v)
 	  : "Ir" (CR_C), "Ir" (0x40)
 	  : "cc");
-
-	 exynos_set_delayed_reset_assertion(core_id, false);
 }
 
 static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
@@ -87,14 +61,6 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 		/* Turn the CPU off on next WFI instruction. */
 		exynos_cpu_power_down(core_id);
 
-		/*
-		 * Exynos4 SoCs require setting
-		 * USE_DELAYED_RESET_ASSERTION so the CPU idle
-		 * clock down feature could properly detect
-		 * global idle state when CPUx is off.
-		 */
-		exynos_set_delayed_reset_assertion(core_id, true);
-
 		wfi();
 
 		if (pen_release == core_id) {
@@ -354,9 +320,6 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		udelay(10);
 	}
 
-	/* No harm if this is called during first boot of secondary CPU */
-	exynos_set_delayed_reset_assertion(core_id, false);
-
 	/*
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
@@ -403,6 +366,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 
 	exynos_sysram_init();
 
+	exynos_set_delayed_reset_assertion(true);
+
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(scu_base_addr());
 
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 318d127df147..582ef2df960d 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -235,6 +235,8 @@ static void exynos_pm_enter_sleep_mode(void)
 
 static void exynos_pm_prepare(void)
 {
+	exynos_set_delayed_reset_assertion(false);
+
 	/* Set wake-up mask registers */
 	exynos_pm_set_wakeup_mask();
 
@@ -383,6 +385,7 @@ early_wakeup:
 
 	/* Clear SLEEP mode set in INFORM1 */
 	pmu_raw_writel(0x0, S5P_INFORM1);
+	exynos_set_delayed_reset_assertion(true);
 }
 
 static void exynos3250_pm_resume(void)
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 05adc8bbdef8..401d8d0085aa 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -500,9 +500,11 @@ BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	ld	r1,PACAR1(r13)
+	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 4e3d5a9621fe..03189d86357d 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -354,6 +354,7 @@ int __copy_instruction(u8 *dest, u8 *src)
 {
 	struct insn insn;
 	kprobe_opcode_t buf[MAX_INSN_SIZE];
+	int length;
 	unsigned long recovered_insn =
 		recover_probed_instruction(buf, (unsigned long)src);
 
@@ -361,16 +362,18 @@ int __copy_instruction(u8 *dest, u8 *src)
 		return 0;
 	kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
 	insn_get_length(&insn);
+	length = insn.length;
+
 	/* Another subsystem puts a breakpoint, failed to recover */
 	if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
 		return 0;
-	memcpy(dest, insn.kaddr, insn.length);
+	memcpy(dest, insn.kaddr, length);
 
 #ifdef CONFIG_X86_64
 	if (insn_rip_relative(&insn)) {
 		s64 newdisp;
 		u8 *disp;
-		kernel_insn_init(&insn, dest, insn.length);
+		kernel_insn_init(&insn, dest, length);
 		insn_get_displacement(&insn);
 		/*
 		 * The copied instruction uses the %rip-relative addressing
@@ -394,7 +397,7 @@ int __copy_instruction(u8 *dest, u8 *src)
 		*(s32 *) disp = (s32) newdisp;
 	}
 #endif
-	return insn.length;
+	return length;
 }
 
 static int arch_copy_kprobe(struct kprobe *p)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4ee827d7bf36..3cb2b58fa26b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1064,6 +1064,17 @@ static void update_divide_count(struct kvm_lapic *apic)
 				   apic->divide_count);
 }
 
+static void apic_update_lvtt(struct kvm_lapic *apic)
+{
+	u32 timer_mode = kvm_apic_get_reg(apic, APIC_LVTT) &
+			apic->lapic_timer.timer_mode_mask;
+
+	if (apic->lapic_timer.timer_mode != timer_mode) {
+		apic->lapic_timer.timer_mode = timer_mode;
+		hrtimer_cancel(&apic->lapic_timer.timer);
+	}
+}
+
 static void apic_timer_expired(struct kvm_lapic *apic)
 {
 	struct kvm_vcpu *vcpu = apic->vcpu;
@@ -1272,6 +1283,7 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 				apic_set_reg(apic, APIC_LVTT + 0x10 * i,
 					     lvt_val | APIC_LVT_MASKED);
 			}
+			apic_update_lvtt(apic);
 			atomic_set(&apic->lapic_timer.pending, 0);
 
 		}
@@ -1304,20 +1316,13 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 
 		break;
 
-	case APIC_LVTT: {
-		u32 timer_mode = val & apic->lapic_timer.timer_mode_mask;
-
-		if (apic->lapic_timer.timer_mode != timer_mode) {
-			apic->lapic_timer.timer_mode = timer_mode;
-			hrtimer_cancel(&apic->lapic_timer.timer);
-		}
-
+	case APIC_LVTT:
 		if (!kvm_apic_sw_enabled(apic))
 			val |= APIC_LVT_MASKED;
 		val &= (apic_lvt_mask[0] | apic->lapic_timer.timer_mode_mask);
 		apic_set_reg(apic, APIC_LVTT, val);
+		apic_update_lvtt(apic);
 		break;
-	}
 
 	case APIC_TMICT:
 		if (apic_lvtt_tscdeadline(apic))
@@ -1552,7 +1557,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 
 	for (i = 0; i < APIC_LVT_NUM; i++)
 		apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
-	apic->lapic_timer.timer_mode = 0;
+	apic_update_lvtt(apic);
 	apic_set_reg(apic, APIC_LVT0,
 		     SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
 
@@ -1778,6 +1783,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
 
 	apic_update_ppr(apic);
 	hrtimer_cancel(&apic->lapic_timer.timer);
+	apic_update_lvtt(apic);
 	update_divide_count(apic);
 	start_apic_timer(apic);
 	apic->irr_pending = true;
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 288547a3c566..f26ebc5e0be6 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0489, 0xe057) },
 	{ USB_DEVICE(0x0489, 0xe056) },
 	{ USB_DEVICE(0x0489, 0xe05f) },
+	{ USB_DEVICE(0x0489, 0xe076) },
 	{ USB_DEVICE(0x0489, 0xe078) },
 	{ USB_DEVICE(0x04c5, 0x1330) },
 	{ USB_DEVICE(0x04CA, 0x3004) },
@@ -111,6 +112,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3474) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -135,6 +137,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -166,6 +169,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2c527da668ae..4fc415703ffc 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -174,6 +174,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -205,6 +206,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 6ec79dbc0840..cbbe40377ad6 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -173,8 +173,7 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
 	int i = 0;
 
 	/* Check if parent_rate is a valid input rate */
-	if (parent_rate < characteristics->input.min ||
-	    parent_rate > characteristics->input.max)
+	if (parent_rate < characteristics->input.min)
 		return -ERANGE;
 
 	/*
@@ -187,6 +186,15 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
 	if (!mindiv)
 		mindiv = 1;
 
+	if (parent_rate > characteristics->input.max) {
+		tmpdiv = DIV_ROUND_UP(parent_rate, characteristics->input.max);
+		if (tmpdiv > PLL_DIV_MAX)
+			return -ERANGE;
+
+		if (tmpdiv > mindiv)
+			mindiv = tmpdiv;
+	}
+
 	/*
 	 * Calculate the maximum divider which is limited by PLL register
 	 * layout (limited by the MUL or DIV field size).
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 69abb08cf146..eb8e5dc9076d 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -121,7 +121,7 @@ extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
 					       struct at91_pmc *pmc);
 #endif
 
-#if defined(CONFIG_HAVE_AT91_SMD)
+#if defined(CONFIG_HAVE_AT91_H32MX)
 extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
 					      struct at91_pmc *pmc);
 #endif
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index f347ab7eea95..08b0da23c4ab 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -1543,6 +1543,8 @@ static int ahash_init(struct ahash_request *req)
 
 	state->current_buf = 0;
 	state->buf_dma = 0;
+	state->buflen_0 = 0;
+	state->buflen_1 = 0;
 
 	return 0;
 }
diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c
index ae31e555793c..a48dc251b14f 100644
--- a/drivers/crypto/caam/caamrng.c
+++ b/drivers/crypto/caam/caamrng.c
@@ -56,7 +56,7 @@
 
 /* Buffer, its dma address and lock */
 struct buf_data {
-	u8 buf[RN_BUF_SIZE];
+	u8 buf[RN_BUF_SIZE] ____cacheline_aligned;
 	dma_addr_t addr;
 	struct completion filled;
 	u32 hw_desc[DESC_JOB_O_LEN];
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ec4d932f8be4..169123a6ad0e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -693,6 +693,16 @@ static int i915_drm_resume(struct drm_device *dev)
 		intel_init_pch_refclk(dev);
 		drm_mode_config_reset(dev);
 
+		/*
+		 * Interrupts have to be enabled before any batches are run.
+		 * If not the GPU will hang. i915_gem_init_hw() will initiate
+		 * batches to update/restore the context.
+		 *
+		 * Modeset enabling in intel_modeset_init_hw() also needs
+		 * working interrupts.
+		 */
+		intel_runtime_pm_enable_interrupts(dev_priv);
+
 		mutex_lock(&dev->struct_mutex);
 		if (i915_gem_init_hw(dev)) {
 			DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
@@ -700,9 +710,6 @@ static int i915_drm_resume(struct drm_device *dev)
 		}
 		mutex_unlock(&dev->struct_mutex);
 
-		/* We need working interrupts for modeset enabling ... */
-		intel_runtime_pm_enable_interrupts(dev_priv);
-
 		intel_modeset_init_hw(dev);
 
 		spin_lock_irq(&dev_priv->irq_lock);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 7a628e4cb27a..9536ec390614 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2732,6 +2732,9 @@ void i915_gem_reset(struct drm_device *dev)
 void
 i915_gem_retire_requests_ring(struct intel_engine_cs *ring)
 {
+	if (list_empty(&ring->request_list))
+		return;
+
 	WARN_ON(i915_verify_lists(ring->dev));
 
 	/* Retire requests first as we use it above for the early return.
@@ -3088,8 +3091,8 @@ int i915_vma_unbind(struct i915_vma *vma)
 		} else if (vma->ggtt_view.pages) {
 			sg_free_table(vma->ggtt_view.pages);
 			kfree(vma->ggtt_view.pages);
-			vma->ggtt_view.pages = NULL;
 		}
+		vma->ggtt_view.pages = NULL;
 	}
 
 	drm_mm_remove_node(&vma->node);
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 9872ba9abf1a..2ffeda3589c2 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1526,6 +1526,11 @@ static int mga_vga_mode_valid(struct drm_connector *connector,
 		return MODE_BANDWIDTH;
 	}
 
+	if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 ||
+	    (mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) {
+		return MODE_H_ILLEGAL;
+	}
+
 	if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 ||
 	    mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 ||
 	    mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 ||
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 686411e4e4f6..b82f2dd1fc32 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -547,6 +547,9 @@ static int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file
 		else
 			*value = 1;
 		break;
+	case RADEON_INFO_VA_UNMAP_WORKING:
+		*value = true;
+		break;
 	default:
 		DRM_DEBUG_KMS("Invalid request %d\n", info->request);
 		return -EINVAL;
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 147029adb885..ac72ece70160 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -2316,7 +2316,6 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
 	page_off = offset % PAGE_SIZE;
 
 	send_wr->sg_list = ib_sge;
-	send_wr->num_sge = sg_nents;
 	send_wr->wr_id = (uintptr_t)&isert_cmd->tx_desc;
 	/*
 	 * Perform mapping of TCM scatterlist memory ib_sge dma_addr.
@@ -2336,14 +2335,17 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
 			  ib_sge->addr, ib_sge->length, ib_sge->lkey);
 		page_off = 0;
 		data_left -= ib_sge->length;
+		if (!data_left)
+			break;
 		ib_sge++;
 		isert_dbg("Incrementing ib_sge pointer to %p\n", ib_sge);
 	}
 
+	send_wr->num_sge = ++i;
 	isert_dbg("Set outgoing sg_list: %p num_sg: %u from TCM SGLs\n",
 		  send_wr->sg_list, send_wr->num_sge);
 
-	return sg_nents;
+	return send_wr->num_sge;
 }
 
 static int
@@ -3311,6 +3313,7 @@ static void isert_free_conn(struct iscsi_conn *conn)
 {
 	struct isert_conn *isert_conn = conn->context;
 
+	isert_wait4flush(isert_conn);
 	isert_put_conn(isert_conn);
 }
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 9b4e30a82e4a..beda011cb741 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1889,8 +1889,8 @@ static int map_request(struct dm_target *ti, struct request *rq,
 			dm_kill_unmapped_request(rq, r);
 			return r;
 		}
-		if (IS_ERR(clone))
-			return DM_MAPIO_REQUEUE;
+		if (r != DM_MAPIO_REMAPPED)
+			return r;
 		if (setup_clone(clone, rq, tio, GFP_KERNEL)) {
 			/* -ENOMEM */
 			ti->type->release_clone_rq(clone);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 75345c1e8c34..5c91df5c1f4f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
 		*have_5ghz_phy = true;
 		return;
 	case 0x4321: /* BCM4306 */
+		/* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */
+		if (dev->phy.type != B43_PHYTYPE_G)
+			break;
+		/* fall through */
 	case 0x4313: /* BCM4311 */
 	case 0x431a: /* BCM4318 */
 	case 0x432a: /* BCM4321 */
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 220c0fd059bb..50faef4f056f 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1468,6 +1468,11 @@ skip_countries:
 		goto alloc_fail8;
 	}
 
+	if (quirks & CLEAR_HALT_CONDITIONS) {
+		usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress));
+		usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress));
+	}
+
 	return 0;
 alloc_fail8:
 	if (acm->country_codes) {
@@ -1747,6 +1752,10 @@ static const struct usb_device_id acm_ids[] = {
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
 
+	{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+	.driver_info = CLEAR_HALT_CONDITIONS,
+	},
+
 	/* Nokia S60 phones expose two ACM channels. The first is
 	 * a modem and is picked up by the standard AT-command
 	 * information below. The second is 'vendor-specific' but
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index ffeb3c83941f..b3b6c9db6fe5 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -133,3 +133,4 @@ struct acm {
 #define NO_DATA_INTERFACE		BIT(4)
 #define IGNORE_DEVICE			BIT(5)
 #define QUIRK_CONTROL_LINE_STATE	BIT(6)
+#define CLEAR_HALT_CONDITIONS		BIT(7)
diff --git a/include/uapi/drm/radeon_drm.h b/include/uapi/drm/radeon_drm.h
index 50d0fb41a3bf..76d2edea5bd1 100644
--- a/include/uapi/drm/radeon_drm.h
+++ b/include/uapi/drm/radeon_drm.h
@@ -1034,6 +1034,7 @@ struct drm_radeon_cs {
 #define RADEON_INFO_VRAM_USAGE		0x1e
 #define RADEON_INFO_GTT_USAGE		0x1f
 #define RADEON_INFO_ACTIVE_CU_COUNT	0x20
+#define RADEON_INFO_VA_UNMAP_WORKING	0x25
 
 struct drm_radeon_info {
 	uint32_t		request;
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index ced69da0ff55..7f2e97ce71a7 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -1369,19 +1369,26 @@ static int check_preds(struct filter_parse_state *ps)
 {
 	int n_normal_preds = 0, n_logical_preds = 0;
 	struct postfix_elt *elt;
+	int cnt = 0;
 
 	list_for_each_entry(elt, &ps->postfix, list) {
-		if (elt->op == OP_NONE)
+		if (elt->op == OP_NONE) {
+			cnt++;
 			continue;
+		}
 
 		if (elt->op == OP_AND || elt->op == OP_OR) {
 			n_logical_preds++;
+			cnt--;
 			continue;
 		}
+		if (elt->op != OP_NOT)
+			cnt--;
 		n_normal_preds++;
+		WARN_ON_ONCE(cnt < 0);
 	}
 
-	if (!n_normal_preds || n_logical_preds >= n_normal_preds) {
+	if (cnt != 1 || !n_normal_preds || n_logical_preds >= n_normal_preds) {
 		parse_error(ps, FILT_ERR_INVALID_FILTER, 0);
 		return -EINVAL;
 	}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 87eff3173ce9..60b3100a2120 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -100,6 +100,7 @@ enum {
 	STAC_HP_ENVY_BASS,
 	STAC_HP_BNB13_EQ,
 	STAC_HP_ENVY_TS_BASS,
+	STAC_HP_ENVY_TS_DAC_BIND,
 	STAC_92HD83XXX_GPIO10_EAPD,
 	STAC_92HD83XXX_MODELS
 };
@@ -2170,6 +2171,22 @@ static void stac92hd83xxx_fixup_gpio10_eapd(struct hda_codec *codec,
 	spec->eapd_switch = 0;
 }
 
+static void hp_envy_ts_fixup_dac_bind(struct hda_codec *codec,
+					    const struct hda_fixup *fix,
+					    int action)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	static hda_nid_t preferred_pairs[] = {
+		0xd, 0x13,
+		0
+	};
+
+	if (action != HDA_FIXUP_ACT_PRE_PROBE)
+		return;
+
+	spec->gen.preferred_dacs = preferred_pairs;
+}
+
 static const struct hda_verb hp_bnb13_eq_verbs[] = {
 	/* 44.1KHz base */
 	{ 0x22, 0x7A6, 0x3E },
@@ -2685,6 +2702,12 @@ static const struct hda_fixup stac92hd83xxx_fixups[] = {
 			{}
 		},
 	},
+	[STAC_HP_ENVY_TS_DAC_BIND] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = hp_envy_ts_fixup_dac_bind,
+		.chained = true,
+		.chain_id = STAC_HP_ENVY_TS_BASS,
+	},
 	[STAC_92HD83XXX_GPIO10_EAPD] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = stac92hd83xxx_fixup_gpio10_eapd,
@@ -2763,6 +2786,8 @@ static const struct snd_pci_quirk stac92hd83xxx_fixup_tbl[] = {
 			  "HP bNB13", STAC_HP_BNB13_EQ),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x190e,
 			  "HP ENVY TS", STAC_HP_ENVY_TS_BASS),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1967,
+			  "HP ENVY TS", STAC_HP_ENVY_TS_DAC_BIND),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1940,
 			  "HP bNB13", STAC_HP_BNB13_EQ),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1941,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ