| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1436018110-3903-5-git-send-email-martink@posteo.de>
Date: Sat, 4 Jul 2015 15:55:05 +0200
From: Martin Kepplinger <martink@...teo.de>
To: jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, mfuzzey@...keon.com, roberta.dobrescu@...il.com,
christoph.muellner@...obroma-systems.com
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Martin Kepplinger <martink@...teo.de>,
Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Subject: [PATCH 4/9] iio: mma8452: add support for MMA8652FC and MMA8653FC accelerometers
MMA8652FC and MMA8653FC don't provide the transient interrupt source, so
the motion interrupt source is used by providing a new iio_chan_spec
definition, so that other supported devices are not affected by this.
Datasheets for the newly supported devices are available at Freescale's
website:
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8653FC.pdf
Signed-off-by: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
---
drivers/iio/accel/Kconfig | 2 +-
drivers/iio/accel/mma8452.c | 79 ++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 91fab16..684c8b5 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -93,7 +93,7 @@ config MMA8452
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following Freescale 3-axis
- accelerometers: MMA8452Q, MMA8453Q.
+ accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
To compile this driver as a module, choose M here: the module
will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 0498b6e..ccce925 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -3,6 +3,8 @@
*
* MMA8452Q
* MMA8453Q
+ * MMA8652FC
+ * MMA8653FC
*
* Copyright 2014 Peter Meerwald <pmeerw@...erw.net>
*
@@ -88,6 +90,8 @@
#define MMA8452_DEVICE_ID 0x2a
#define MMA8453_DEVICE_ID 0x3a
+#define MMA8652_DEVICE_ID 0x4a
+#define MMA8653_DEVICE_ID 0x5a
struct mma8452_data {
struct i2c_client *client;
@@ -740,6 +744,26 @@ static struct attribute_group mma8452_event_attribute_group = {
.num_event_specs = ARRAY_SIZE(mma8452_transient_event), \
}
+#define MMA8652_CHANNEL(axis, idx, bits) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_CALIBBIAS), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = (bits), \
+ .storagebits = 16, \
+ .shift = 16 - (bits), \
+ .endianness = IIO_BE, \
+ }, \
+ .event_spec = mma8452_motion_event, \
+ .num_event_specs = ARRAY_SIZE(mma8452_motion_event), \
+}
+
static const struct iio_chan_spec mma8452_channels[] = {
MMA8452_CHANNEL(X, 0, 12),
MMA8452_CHANNEL(Y, 1, 12),
@@ -754,9 +778,25 @@ static const struct iio_chan_spec mma8453_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
+static const struct iio_chan_spec mma8652_channels[] = {
+ MMA8652_CHANNEL(X, 0, 12),
+ MMA8652_CHANNEL(Y, 1, 12),
+ MMA8652_CHANNEL(Z, 2, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec mma8653_channels[] = {
+ MMA8652_CHANNEL(X, 0, 10),
+ MMA8652_CHANNEL(Y, 1, 10),
+ MMA8652_CHANNEL(Z, 2, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
enum {
mma8452,
mma8453,
+ mma8652,
+ mma8653,
};
/*
@@ -800,6 +840,38 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
.ev_count = MMA8452_TRANSIENT_COUNT,
},
+ [mma8652] = {
+ .chip_id = MMA8652_DEVICE_ID,
+ .channels = mma8652_channels,
+ .num_channels = ARRAY_SIZE(mma8652_channels),
+ .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
+ .ev_cfg = MMA8452_FF_MT_CFG,
+ .ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
+ .ev_cfg_chan_shift = 3,
+ .ev_src = MMA8452_FF_MT_SRC,
+ .ev_src_xe = MMA8452_FF_MT_SRC_XHE,
+ .ev_src_ye = MMA8452_FF_MT_SRC_YHE,
+ .ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
+ .ev_ths = MMA8452_FF_MT_THS,
+ .ev_ths_mask = MMA8452_FF_MT_THS_MASK,
+ .ev_count = MMA8452_FF_MT_COUNT,
+ },
+ [mma8653] = {
+ .chip_id = MMA8653_DEVICE_ID,
+ .channels = mma8653_channels,
+ .num_channels = ARRAY_SIZE(mma8653_channels),
+ .mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
+ .ev_cfg = MMA8452_FF_MT_CFG,
+ .ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
+ .ev_cfg_chan_shift = 3,
+ .ev_src = MMA8452_FF_MT_SRC,
+ .ev_src_xe = MMA8452_FF_MT_SRC_XHE,
+ .ev_src_ye = MMA8452_FF_MT_SRC_YHE,
+ .ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
+ .ev_ths = MMA8452_FF_MT_THS,
+ .ev_ths_mask = MMA8452_FF_MT_THS_MASK,
+ .ev_count = MMA8452_FF_MT_COUNT,
+ },
};
static struct attribute *mma8452_attributes[] = {
@@ -921,6 +993,8 @@ static int mma8452_reset(struct i2c_client *client)
static const struct of_device_id mma8452_dt_ids[] = {
{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
+ { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] },
+ { .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] },
{ }
};
@@ -936,7 +1010,8 @@ static int mma8452_probe(struct i2c_client *client,
if (ret < 0)
return ret;
- if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
+ if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID &&
+ ret != MMA8652_DEVICE_ID && ret != MMA8653_DEVICE_ID)
return -ENODEV;
match = of_match_device(mma8452_dt_ids, &client->dev);
@@ -1086,6 +1161,8 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
static const struct i2c_device_id mma8452_id[] = {
{ "mma8452", mma8452 },
{ "mma8453", mma8453 },
+ { "mma8652", mma8652 },
+ { "mma8653", mma8653 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mma8452_id);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists