| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1436154450-21102-3-git-send-email-yamada.masahiro@socionext.com>
Date: Mon, 6 Jul 2015 12:47:29 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: arm@...nel.org
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
Russell King <linux@....linux.org.uk>,
devicetree@...r.kernel.org, Kumar Gala <galak@...eaurora.org>,
linux-kernel@...r.kernel.org,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/3] ARM: dts: UniPhier: add on-chip UART device nodes
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb6a (serial: 8250_uniphier: add UniPhier serial
driver).
Add device nodes to make it really available.
We no longer have to depend on the on-board UART device (16550A),
so let's change the chosen and aliases to point to the on-chip ones.
Also, turn on the on-board Ethernet device.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts | 21 ++++++++++++---
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 42 +++++++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts | 21 ++++++++++++---
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 42 +++++++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts | 20 +++++++++++---
arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 33 +++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts | 21 ++++++++++++---
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 42 +++++++++++++++++++++++++++++
8 files changed, 230 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
index 200b0c9..0cd385a9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -57,11 +57,14 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
};
};
@@ -74,6 +77,18 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+ðsc {
interrupts = <0 49 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 6a34c56..1261e6d 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -64,6 +64,12 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <36864000>;
+ };
};
soc {
@@ -79,6 +85,42 @@
#size-cells = <1>;
};
+ serial0: serial@...06800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@...06900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@...06a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial3: serial@...06b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 29 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
system-bus-controller-misc@...00000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
index d891135..0951cbf 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -57,11 +57,14 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
};
};
@@ -74,6 +77,18 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+ðsc {
interrupts = <0 50 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index dc63360..acd2c06 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -71,6 +71,12 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <73728000>;
+ };
};
soc {
@@ -86,6 +92,42 @@
#size-cells = <1>;
};
+ serial0: serial@...06800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@...06900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@...06a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial3: serial@...06b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 29 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
system-bus-controller-misc@...00000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
index 3ea64ae..47a44da 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -58,11 +58,13 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
};
};
@@ -75,6 +77,18 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+ðsc {
interrupts = <0 49 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
index 248b188..feb253b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -71,6 +71,12 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <36864000>;
+ };
};
soc {
@@ -108,6 +114,33 @@
<0x20000100 0x100>;
};
+ serial0: serial@...06800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@...06900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@...06a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
system-bus-controller-misc@...00000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
index dcdc4f7..07e93a9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -57,11 +57,14 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
};
};
@@ -74,6 +77,18 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+ðsc {
interrupts = <0 48 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index baa71e1..bf0c8c1 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -64,6 +64,12 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <80000000>;
+ };
};
soc {
@@ -79,6 +85,42 @@
#size-cells = <1>;
};
+ serial0: serial@...06800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@...06900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@...06a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial3: serial@...06b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 29 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
system-bus-controller-misc@...00000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists