| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1436201338-14263-12-git-send-email-green@linuxhacker.ru>
Date: Mon, 6 Jul 2015 12:48:49 -0400
From: green@...uxhacker.ru
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
devel@...verdev.osuosl.org,
Andreas Dilger <andreas.dilger@...el.com>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Oleg Drokin <green@...uxhacker.ru>
Subject: [PATCH 11/20] staging/lustre/obdclass: Move AT controls from sysctl to sysfs
From: Oleg Drokin <green@...uxhacker.ru>
Adaptive Timeouts controls are being moved from /proc/sys/lustre
to /sys/fs/lustre
Signed-off-by: Oleg Drokin <green@...uxhacker.ru>
---
.../lustre/lustre/obdclass/linux/linux-sysctl.c | 45 ++++--------------
drivers/staging/lustre/sysfs-fs-lustre | 53 ++++++++++++++++++++++
2 files changed, 63 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c b/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
index 6af1cb2..82b3c39 100644
--- a/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
+++ b/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
@@ -138,44 +138,14 @@ LUSTRE_RW_ATTR(max_dirty_mb);
LUSTRE_STATIC_UINT_ATTR(debug_peer_on_timeout, &obd_debug_peer_on_timeout);
LUSTRE_STATIC_UINT_ATTR(dump_on_timeout, &obd_dump_on_timeout);
LUSTRE_STATIC_UINT_ATTR(dump_on_eviction, &obd_dump_on_eviction);
+LUSTRE_STATIC_UINT_ATTR(at_min, &at_min);
+LUSTRE_STATIC_UINT_ATTR(at_max, &at_max);
+LUSTRE_STATIC_UINT_ATTR(at_extra, &at_extra);
+LUSTRE_STATIC_UINT_ATTR(at_early_margin, &at_early_margin);
+LUSTRE_STATIC_UINT_ATTR(at_history, &at_history);
#ifdef CONFIG_SYSCTL
static struct ctl_table obd_table[] = {
- {
- .procname = "at_min",
- .data = &at_min,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- {
- .procname = "at_max",
- .data = &at_max,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- {
- .procname = "at_extra",
- .data = &at_extra,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- {
- .procname = "at_early_margin",
- .data = &at_early_margin,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- {
- .procname = "at_history",
- .data = &at_history,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
{}
};
@@ -197,6 +167,11 @@ static struct attribute *lustre_attrs[] = {
&lustre_sattr_debug_peer_on_timeout.u.attr,
&lustre_sattr_dump_on_timeout.u.attr,
&lustre_sattr_dump_on_eviction.u.attr,
+ &lustre_sattr_at_min.u.attr,
+ &lustre_sattr_at_max.u.attr,
+ &lustre_sattr_at_extra.u.attr,
+ &lustre_sattr_at_early_margin.u.attr,
+ &lustre_sattr_at_history.u.attr,
NULL,
};
diff --git a/drivers/staging/lustre/sysfs-fs-lustre b/drivers/staging/lustre/sysfs-fs-lustre
index ea9982b..873e2cf 100644
--- a/drivers/staging/lustre/sysfs-fs-lustre
+++ b/drivers/staging/lustre/sysfs-fs-lustre
@@ -90,6 +90,59 @@ Description:
This is useful if yout debug buffer typically rolls over
by the time you notice the eviction event.
+What: /sys/fs/lustre/at_min
+Date: July 2015
+Contact: "Oleg Drokin" <oleg.drokin@...el.com>
+Description:
+ Controls minimum adaptive timeout in seconds. If you encounter
+ a case where clients timeout due to server-reported processing
+ time being too short, you might consider increasing this value.
+ One common case of this if the underlying network has
+ unpredictable long delays.
+ Default: 0
+
+What: /sys/fs/lustre/at_max
+Date: July 2015
+Contact: "Oleg Drokin" <oleg.drokin@...el.com>
+Description:
+ Controls maximum adaptive timeout in seconds. If at_max timeout
+ is reached for an RPC, the RPC will time out.
+ Some genuinuely slow network hardware might warrant increasing
+ this value.
+ Setting this value to 0 disables Adaptive Timeouts
+ functionality and old-style obd_timeout value is then used.
+ Default: 600
+
+What: /sys/fs/lustre/at_extra
+Date: July 2015
+Contact: "Oleg Drokin" <oleg.drokin@...el.com>
+Description:
+ Controls how much extra time to request for unfinished requests
+ in processing in seconds. Normally a server-side parameter, it
+ is also used on the client for responses to various LDLM ASTs
+ that are handled with a special server thread on the client.
+ This is a way for the servers to ask the clients not to time
+ out the request that reached current servicing time estimate
+ yet and give it some more time.
+ Default: 30
+
+What: /sys/fs/lustre/at_early_margin
+Date: July 2015
+Contact: "Oleg Drokin" <oleg.drokin@...el.com>
+Description:
+ Controls when to send the early reply for requests that are
+ about to timeout as an offset to the estimated service time in
+ seconds..
+ Default: 5
+
+What: /sys/fs/lustre/at_history
+Date: July 2015
+Contact: "Oleg Drokin" <oleg.drokin@...el.com>
+Description:
+ Controls for how many seconds to remember slowest events
+ encountered by adaptive timeouts code.
+ Default: 600
+
What: /sys/fs/lustre/llite/<fsname>-<uuid>/blocksize
Date: May 2015
Contact: "Oleg Drokin" <oleg.drokin@...el.com>
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists