| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 7 Jul 2015 13:37:16 +0100
From: Lee Jones <lee.jones@...aro.org>
To: bjorn@...o.se
Cc: Andy Gross <agross@...eaurora.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v2 06/11] mfd: qcom-smd-rpm: Driver for the Qualcomm RPM
over SMD
On Fri, 26 Jun 2015, bjorn@...o.se wrote:
> From: Bjorn Andersson <bjorn.andersson@...ymobile.com>
>
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8974 based
> devices.
> The driver exposes resources that child drivers can operate on; to
> implementing regulator, clock and bus frequency drivers.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
> ---
> drivers/mfd/Kconfig | 14 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/qcom-smd-rpm.c | 236 +++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/qcom-smd-rpm.h | 35 ++++++
> 4 files changed, 286 insertions(+)
> create mode 100644 drivers/mfd/qcom-smd-rpm.c
> create mode 100644 include/linux/mfd/qcom-smd-rpm.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 6538159..666c812 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -656,6 +656,20 @@ config MFD_QCOM_RPM
> Say M here if you want to include support for the Qualcomm RPM as a
> module. This will build a module called "qcom_rpm".
>
> +config MFD_QCOM_SMD_RPM
> + tristate "Qualcomm Resource Power Manager (RPM) over SMD"
> + depends on QCOM_SMD && OF
> + help
> + If you say yes to this option, support will be included for the
> + Resource Power Manager system found in the Qualcomm 8974 based
> + devices.
> +
> + This is required to access many regulators, clocks and bus
> + frequencies controlled by the RPM on these devices.
> +
> + Say M here if you want to include support for the Qualcomm RPM as a
> + module. This will build a module called "qcom-smd-rpm".
I'm not exactly sure what makes this an MFD device.
> config MFD_SPMI_PMIC
> tristate "Qualcomm SPMI PMICs"
> depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index ea40e07..289bd24 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -156,6 +156,7 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
> obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
> obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
> obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
> +obj-$(CONFIG_MFD_QCOM_SMD_RPM) += qcom-smd-rpm.o
> obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
> obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
> obj-$(CONFIG_MFD_TPS65090) += tps65090.o
> diff --git a/drivers/mfd/qcom-smd-rpm.c b/drivers/mfd/qcom-smd-rpm.c
> new file mode 100644
> index 0000000..d6faf85
> --- /dev/null
> +++ b/drivers/mfd/qcom-smd-rpm.c
> @@ -0,0 +1,236 @@
> +/*
> + * Copyright (c) 2015, Sony Mobile Communications AB.
> + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/soc/qcom/smd.h>
> +#include <linux/mfd/qcom-smd-rpm.h>
> +
> +#include <dt-bindings/mfd/qcom-smd-rpm.h>
> +
> +#define RPM_REQUEST_TIMEOUT (5 * HZ)
> +
> +/**
> + * struct qcom_smd_rpm - state of the rpm device driver
> + * @rpm_channel: reference to the smd channel
> + * @ack: completion for acks
> + * @lock: mutual exclusion around the send/complete pair
> + * @ack_status: result of the rpm request
> + */
> +struct qcom_smd_rpm {
> + struct qcom_smd_channel *rpm_channel;
> +
> + struct completion ack;
> + struct mutex lock;
> + int ack_status;
> +};
> +
> +/**
> + * struct qcom_rpm_header - header for all rpm requests and responses
> + * @service_type: identifier of the service
> + * @length: length of the payload
> + */
> +struct qcom_rpm_header {
> + u32 service_type;
> + u32 length;
> +};
> +
> +/**
> + * struct qcom_rpm_request - request message to the rpm
> + * @msg_id: identifier of the outgoing message
> + * @flags: active/sleep state flags
> + * @type: resource type
> + * @id: resource id
> + * @data_len: length of the payload following this header
> + */
> +struct qcom_rpm_request {
> + u32 msg_id;
> + u32 flags;
> + u32 type;
> + u32 id;
> + u32 data_len;
> +};
> +
> +/**
> + * struct qcom_rpm_message - response message from the rpm
> + * @msg_type: indicator of the type of message
> + * @length: the size of this message, including the message header
> + * @msg_id: message id
> + * @message: textual message from the rpm
> + *
> + * Multiple of these messages can be stacked in an rpm message.
> + */
> +struct qcom_rpm_message {
> + u32 msg_type;
> + u32 length;
> + union {
> + u32 msg_id;
> + u8 message[0];
> + };
> +};
> +
> +#define RPM_SERVICE_TYPE_REQUEST 0x00716572 /* "req\0" */
> +
> +#define RPM_MSG_TYPE_ERR 0x00727265 /* "err\0" */
> +#define RPM_MSG_TYPE_MSG_ID 0x2367736d /* "msg#" */
> +
> +/**
> + * qcom_rpm_smd_write - write @buf to @type:@id
> + * @rpm: rpm handle
> + * @type: resource type
> + * @id: resource identifier
> + * @buf: the data to be written
> + * @count: number of bytes in @buf
> + */
> +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
> + int state,
> + u32 type, u32 id,
> + void *buf,
> + size_t count)
> +{
> + static unsigned msg_id = 1;
> + int left;
> + int ret;
> +
> + struct {
> + struct qcom_rpm_header hdr;
> + struct qcom_rpm_request req;
> + u8 payload[count];
> + } pkt;
> +
> + /* SMD packets to the RPM may not exceed 256 bytes */
> + if (WARN_ON(sizeof(pkt) >= 256))
> + return -EINVAL;
> +
> + mutex_lock(&rpm->lock);
> +
> + pkt.hdr.service_type = RPM_SERVICE_TYPE_REQUEST;
> + pkt.hdr.length = sizeof(struct qcom_rpm_request) + count;
> +
> + pkt.req.msg_id = msg_id++;
> + pkt.req.flags = BIT(state);
> + pkt.req.type = type;
> + pkt.req.id = id;
> + pkt.req.data_len = count;
> + memcpy(pkt.payload, buf, count);
> +
> + ret = qcom_smd_send(rpm->rpm_channel, &pkt, sizeof(pkt));
> + if (ret)
> + goto out;
> +
> + left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
> + if (!left)
> + ret = -ETIMEDOUT;
> + else
> + ret = rpm->ack_status;
> +
> +out:
> + mutex_unlock(&rpm->lock);
> + return ret;
> +}
> +EXPORT_SYMBOL(qcom_rpm_smd_write);
> +
> +#define RPM_ERR_INVALID_RESOURCE "resource does not exist"
I don't like this at all.
> +static int qcom_smd_rpm_callback(struct qcom_smd_device *qsdev,
> + const void *data,
> + size_t count)
> +{
> + const struct qcom_rpm_header *hdr = data;
> + const struct qcom_rpm_message *msg;
> + const size_t inv_res_len = sizeof(RPM_ERR_INVALID_RESOURCE) - 1;
> + struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev);
> + const u8 *buf = data + sizeof(struct qcom_rpm_header);
> + const u8 *end = buf + hdr->length;
> + int status = 0;
> +
> + if (hdr->service_type != RPM_SERVICE_TYPE_REQUEST ||
> + hdr->length < sizeof(struct qcom_rpm_message)) {
> + dev_err(&qsdev->dev, "invalid request\n");
> + return 0;
> + }
> +
> + while (buf < end) {
> + msg = (struct qcom_rpm_message *)buf;
> + switch (msg->msg_type) {
> + case RPM_MSG_TYPE_MSG_ID:
> + break;
> + case RPM_MSG_TYPE_ERR:
> + if (msg->length == inv_res_len &&
> + !memcmp(msg->message,
> + RPM_ERR_INVALID_RESOURCE,
> + inv_res_len))
strncpy(msg->message, "resource does not exist", 23);
> + status = -ENXIO;
> + else
> + status = -EIO;
> + break;
> + }
> +
> + buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg->length, 4);
> + }
> +
> + rpm->ack_status = status;
> + complete(&rpm->ack);
> + return 0;
> +}
> +
> +static int qcom_smd_rpm_probe(struct qcom_smd_device *sdev)
> +{
> + struct qcom_smd_rpm *rpm;
> +
> + rpm = devm_kzalloc(&sdev->dev, sizeof(*rpm), GFP_KERNEL);
> + if (!rpm)
> + return -ENOMEM;
> +
> + mutex_init(&rpm->lock);
> + init_completion(&rpm->ack);
> +
> + rpm->rpm_channel = sdev->channel;
> +
> + dev_set_drvdata(&sdev->dev, rpm);
> +
> + return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev);
> +}
> +
> +static void qcom_smd_rpm_remove(struct qcom_smd_device *sdev)
> +{
> + of_platform_depopulate(&sdev->dev);
> +}
> +
> +static const struct of_device_id qcom_smd_rpm_of_match[] = {
> + { .compatible = "qcom,rpm-msm8974" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
> +
> +static struct qcom_smd_driver qcom_smd_rpm_driver = {
> + .probe = qcom_smd_rpm_probe,
> + .remove = qcom_smd_rpm_remove,
> + .callback = qcom_smd_rpm_callback,
> + .driver = {
> + .name = "qcom_smd_rpm",
> + .owner = THIS_MODULE,
Remove this line.
> + .of_match_table = qcom_smd_rpm_of_match,
> + },
> +};
> +
> +module_qcom_smd_driver(qcom_smd_rpm_driver);
> +
> +MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@...ymobile.com>");
> +MODULE_DESCRIPTION("Qualcomm SMD backed RPM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/qcom-smd-rpm.h b/include/linux/mfd/qcom-smd-rpm.h
> new file mode 100644
> index 0000000..2a53dca
> --- /dev/null
> +++ b/include/linux/mfd/qcom-smd-rpm.h
> @@ -0,0 +1,35 @@
> +#ifndef __QCOM_SMD_RPM_H__
> +#define __QCOM_SMD_RPM_H__
> +
> +struct qcom_smd_rpm;
> +
> +#define QCOM_SMD_RPM_ACTIVE_STATE 0
> +#define QCOM_SMD_RPM_SLEEP_STATE 1
> +
> +/*
> + * Constants used for addressing resources in the RPM.
> + */
> +#define QCOM_SMD_RPM_BOOST 0x61747362
> +#define QCOM_SMD_RPM_BUS_CLK 0x316b6c63
> +#define QCOM_SMD_RPM_BUS_MASTER 0x73616d62
> +#define QCOM_SMD_RPM_BUS_SLAVE 0x766c7362
> +#define QCOM_SMD_RPM_CLK_BUF_A 0x616B6C63
> +#define QCOM_SMD_RPM_LDOA 0x616f646c
> +#define QCOM_SMD_RPM_LDOB 0x626F646C
> +#define QCOM_SMD_RPM_MEM_CLK 0x326b6c63
> +#define QCOM_SMD_RPM_MISC_CLK 0x306b6c63
> +#define QCOM_SMD_RPM_NCPA 0x6170636E
> +#define QCOM_SMD_RPM_NCPB 0x6270636E
> +#define QCOM_SMD_RPM_OCMEM_PWR 0x706d636f
> +#define QCOM_SMD_RPM_QPIC_CLK 0x63697071
> +#define QCOM_SMD_RPM_SMPA 0x61706d73
> +#define QCOM_SMD_RPM_SMPB 0x62706d73
> +#define QCOM_SMD_RPM_SPDM 0x63707362
> +#define QCOM_SMD_RPM_VSA 0x00617376
> +
> +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
> + int state,
> + u32 resource_type, u32 resource_id,
> + void *buf, size_t count);
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists