linux-kernel - Re: [5/6] mvneta: implement SGMII-based in-band link state signaling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <559D5520.3030700@list.ru>
Date:	Wed, 8 Jul 2015 19:51:44 +0300
From:	Stas Sergeev <stsp@...t.ru>
To:	Sebastien Rannou <mxs@...k.org>
Cc:	netdev@...r.kernel.org,
	Linux kernel <linux-kernel@...r.kernel.org>,
	Stas Sergeev <stsp@...rs.sourceforge.net>,
	Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Subject: Re: [5/6] mvneta: implement SGMII-based in-band link state signaling

08.07.2015 19:30, Sebastien Rannou пишет:
> Hi Stas,
>
> On Fri, 27 Mar 2015, Stas Sergeev wrote:
>
>> When MDIO bus is unavailable (common setup for SGMII), the in-band
>> signaling must be used to correctly track link state.
>> This patch enables the in-band status delivery and interrupts for
>> links state changes, namely:
>> - link up/down
>> - link speed
>> - duplex full/half
>> Upon reciving the appropriate interrupt, the driver updates the
>> fixed_phy status to match the received status.
> I'm seeing a regression with this patch when trying to netboot an Armada
> XP board (by reverting this commit it is fine), the network
> link stays down:
>
> [    9.274492] mvneta d0070000.ethernet eth0: Link is Down
>
> (I've added an extra call to phy_print_status() in mvneta_adjust_link() to
> get this trace).
>
> I've tried to dig a bit in the code, and it seems that the status.link flag
> never gets set in mvneta_fixed_link_update(). If I try to force the
> use_inband_status to 0 in mvneta_probe(), it boots properly so I'm not
> sure that I need the in-band status/delivery in my case ; I'm using a
> custom DTB with a fixed-link:
>
> eth0: ethernet@...00 {
>           status = "okay";
>           fixed-link = <1 1 1000 0 0>;
>           phy-mode = "sgmii";
> };
>
> Could there be something missing in the condition that initializes
> pp->use_inband_status?
Hi, use_inband_status is set when fixed-link is used, which is
exactly your case. But it seems something on the other end
is not generating the inband status. What is there? A phy chip,
or something else?
Perhaps some DT property should be added to explicitly
enable the use of the inband status... I just thought in sgmii
protocol it is a mandatory.
I'll try to come up with the patch tomorrow that adds such
property.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/