[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150714003427.GA31197@shlinux2>
Date: Tue, 14 Jul 2015 08:34:29 +0800
From: Peter Chen <peter.chen@...escale.com>
To: Roger Quadros <rogerq@...com>
CC: <stern@...land.harvard.edu>, <balbi@...com>,
<gregkh@...uxfoundation.org>, <dan.j.williams@...el.com>,
<jun.li@...escale.com>, <mathias.nyman@...ux.intel.com>,
<tony@...mide.com>, <Joao.Pinto@...opsys.com>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>
Subject: Re: [PATCH v3 04/11] otg-fsm: move usb_bus_start_enum into
otg-fsm->ops
On Mon, Jul 13, 2015 at 01:13:54PM +0300, Roger Quadros wrote:
> Peter,
>
> On 13/07/15 04:58, Peter Chen wrote:
> > On Wed, Jul 08, 2015 at 01:19:30PM +0300, Roger Quadros wrote:
> >> This is to prevent missing symbol build error if OTG is
> >> enabled (built-in) and HCD core (CONFIG_USB) is module.
> >>
> >
> > We may let the OTG-DRD/OTG-FSM depends on CONFIG_USB to fix it.
>
> CONFIG_OTG already depends on CONFIG_USB as it is a sub-option of
> CONFIG_USB. It doesn't depend on CONFIG_USB_GADGET and that can
> be fixed.
>
> But dependency is not the problem here. Symbols not available to
> OTG driver when USB/GADGET is 'm' is the problem.
>
> e.g.
> CONFIG_USB_OTG is always built-in.
> we need to work if CONFIG_USB is 'm'/'y'
> _and_ if CONFIG_USB_GADGET is 'm'/'y'
>
below should fix this issue, but we may need to make some
changes for code which are defined by CONFIG_USB_OTG.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index a99c89e..5e374ad 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -42,8 +42,9 @@ config USB_DYNAMIC_MINORS
If you are unsure about this, say N here.
config USB_OTG
- bool "OTG support"
+ tristate "OTG support"
depends on PM
+ depends on USB && USB_GADGET
default n
help
The most notable feature of
USB OTG is support for a
>
> >
> > Peter
> >
> >> Signed-off-by: Roger Quadros <rogerq@...com>
> >> ---
> >> drivers/usb/common/usb-otg-fsm.c | 6 ++++--
> >> drivers/usb/phy/phy-fsl-usb.c | 2 ++
> >> include/linux/usb/otg-fsm.h | 1 +
> >> 3 files changed, 7 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
> >> index 1873eb3..156fd25 100644
> >> --- a/drivers/usb/common/usb-otg-fsm.c
> >> +++ b/drivers/usb/common/usb-otg-fsm.c
> >> @@ -166,8 +166,10 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
> >> otg_loc_conn(fsm, 0);
> >> otg_loc_sof(fsm, 1);
> >> otg_set_protocol(fsm, PROTO_HOST);
> >> - usb_bus_start_enum(fsm->otg->host,
> >> - fsm->otg->host->otg_port);
> >> + if (fsm->ops->start_enum) {
> >> + fsm->ops->start_enum(fsm->otg->host,
> >> + fsm->otg->host->otg_port);
> >> + }
> >> break;
> >> case OTG_STATE_A_IDLE:
> >> otg_drv_vbus(fsm, 0);
> >> diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
> >> index ee3f2c2..19541ed 100644
> >> --- a/drivers/usb/phy/phy-fsl-usb.c
> >> +++ b/drivers/usb/phy/phy-fsl-usb.c
> >> @@ -783,6 +783,8 @@ static struct otg_fsm_ops fsl_otg_ops = {
> >>
> >> .start_host = fsl_otg_start_host,
> >> .start_gadget = fsl_otg_start_gadget,
> >> +
> >> + .start_enum = usb_bus_start_enum,
> >> };
> >>
> >> /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
> >> diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
> >> index c631dde..22d8baa 100644
> >> --- a/include/linux/usb/otg-fsm.h
> >> +++ b/include/linux/usb/otg-fsm.h
> >> @@ -198,6 +198,7 @@ struct otg_fsm_ops {
> >> void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
> >> int (*start_host)(struct otg_fsm *fsm, int on);
> >> int (*start_gadget)(struct otg_fsm *fsm, int on);
> >> + int (*start_enum)(struct usb_bus *bus, unsigned port_num);
> >> };
> >>
> >>
> >> --
> >> 2.1.4
> >>
> >
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists