Message-ID: <20150714203732.GA20241@kroah.com>
Date:	Tue, 14 Jul 2015 13:37:32 -0700
From:	Greg KH <gregkh@...uxfoundation.org>
To:	jay.p.patel@...el.com, intel-gfx@...ts.freedesktop.org,
	LKML <linux-kernel@...r.kernel.org>
Subject: Re: [Intel-gfx] [RFC 1/1] drm/i915 : Wait until SYSTEM_RUNNING
 before loading CSR firmware

On Tue, Jul 14, 2015 at 11:22:35AM +0200, Daniel Vetter wrote:
> On Mon, Jul 13, 2015 at 09:36:45AM -0700, jay.p.patel@...el.com wrote:
> > From: Jay Patel <jay.p.patel@...el.com>
> > 
> > NOTE: This is an interim solution which is targeted towards
> > Chrome OS/Android to be used until a long term solution is available.
> > 
> > In this patch, request_firmware() is called in a worker thread
> > which initially waits for file system to be initialized and then
> > attempts to load the firmware.
> 
> Aside: I posted a bunch of proof-of-principle patches to clean up dmc
> loading and convert over to using an explicit workqueue. They're being
> tested/made-to-actually-work right now I think.
> 
> > "request_firmware_nowait()" is also using an asynchronous thread
> > running concurrently with the rest of the system initialization.
> > However, it tries to load firmware only once without checking the
> > sytem status and fails most of the time.
> > 
> > Change-Id: I2cb16a768e54a85f48a6682d9690b4c8af844668

What's this line for?  :)

> > Signed-off-by: Jay Patel <jay.p.patel@...el.com>
> > ---
> >  drivers/gpu/drm/i915/i915_drv.c  |  2 ++
> >  drivers/gpu/drm/i915/intel_csr.c | 58 ++++++++++++++++++++++++++++++++--------
> >  2 files changed, 49 insertions(+), 11 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> > index 8c8407d..eb6f7e3 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.c
> > +++ b/drivers/gpu/drm/i915/i915_drv.c
> > @@ -559,6 +559,7 @@ void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
> >  void i915_firmware_load_error_print(const char *fw_path, int err)
> >  {
> >  	DRM_ERROR("failed to load firmware %s (%d)\n", fw_path, err);
> > +	DRM_ERROR("The firmware file may be missing\n");
> >  
> >  	/*
> >  	 * If the reason is not known assume -ENOENT since that's the most
> > @@ -574,6 +575,7 @@ void i915_firmware_load_error_print(const char *fw_path, int err)
> >  	  "The driver is built-in, so to load the firmware you need to\n"
> >  	  "include it either in the kernel (see CONFIG_EXTRA_FIRMWARE) or\n"
> >  	  "in your initrd/initramfs image.\n");
> > +
> >  }
> >  
> >  static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
> > diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
> > index 9311cdd..8d1f08c 100644
> > --- a/drivers/gpu/drm/i915/intel_csr.c
> > +++ b/drivers/gpu/drm/i915/intel_csr.c
> > @@ -349,7 +349,7 @@ static void finish_csr_load(const struct firmware *fw, void *context)
> >  	/* load csr program during system boot, as needed for DC states */
> >  	intel_csr_load_program(dev);
> >  	fw_loaded = true;
> > -
> > +	DRM_INFO("CSR Firmware Loaded\n");
> >  out:
> >  	if (fw_loaded)
> >  		intel_runtime_pm_put(dev_priv);
> > @@ -359,11 +359,46 @@ out:
> >  	release_firmware(fw);
> >  }
> >  
> > +struct csr_firmware_work {
> > +	struct work_struct work;
> > +	struct module *module;
> > +	struct drm_device *dev;
> > +};
> > +
> > +/* csr_firmware_work_func() - thread function for loading the firmware*/
> > +static void csr_firmware_work_func(struct work_struct *work)
> > +{
> > +	const struct firmware *fw;
> > +	const struct csr_firmware_work *fw_work = container_of(work, struct csr_firmware_work, work);
> > +	int ret;
> > +	struct drm_device *dev = fw_work->dev;
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	struct intel_csr *csr = &dev_priv->csr;
> > +
> > +	/* Wait until root filesystem is loaded in case the firmware
> > +	 * is not built-in but in /lib/firmware */
> > +	while(system_state !=  SYSTEM_RUNNING){
> > +		msleep(500);
> > +	}
> 
> Yeah, not going to merge that right now until we've had a decent
> discussion with Greg KH (since imo his stance of every driver creating
> it's own retry loop just doesn't work, especially not with gfx where init
> is hairy and you just don't want to retry without end).

Exactly, this type of thing isn't good at all (especially given that
the code isn't even checkpatch clean...)

Don't do this.  If you really want to somehow handle built-in drivers
that need firmware before the root filesystem is present, then use the
async firmware loading interface, don't sit and spin, that's crazy.

> Aside: Another solution might be the wait_for_rootfs from
> 
> http://www.gossamer-threads.com/lists/linux/kernel/2010793
> 
> But if Greg insists that each driver needs to solve this themselves then
> I'll pull something like this into upstream, but probably with a Kconfig
> option to disable it for normal linux userspace.

"solve" this by just not sitting and spining, wait for userspace to load
your firmware if it needs it.  Or, even better yet, if you really need
firmare at early boot before a rootfs, build the firmware into the
kernel image, like we used to do for a few decades.

> The other option would
> be to use CONFIG_FW_LOADER_USERSPACE_FALLBACK udev helper. That might be
> an option for intel android, but it sounds like not something cros wants
> to do. Therefore

why would chromeos not want to use the udev helper?

> 
> Acked-by: Daniel Vetter <daniel.vetter@...ll.ch>
> 
> Also adding Greg so he knows what's happening here.

Ick, please don't take this as-is.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists