| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1436951580-15977-171-git-send-email-luis.henriques@canonical.com>
Date: Wed, 15 Jul 2015 10:12:45 +0100
From: Luis Henriques <luis.henriques@...onical.com>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org,
kernel-team@...ts.ubuntu.com
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Luis Henriques <luis.henriques@...onical.com>
Subject: [PATCH 3.16.y-ckt 170/185] ACPI / init: Switch over platform to the ACPI mode later
3.16.7-ckt15 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>
commit b064a8fa77dfead647564c46ac8fc5b13bd1ab73 upstream.
Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early. Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later".
However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.
To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.
That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann <tolzmann@...gen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Acked-by: Toshi Kani <toshi.kani@...com>
Reviewed-by: Hanjun Guo <hanjun.guo@...aro.org>
Reviewed-by: Lee, Chun-Yi <jlee@...e.com>
Signed-off-by: Luis Henriques <luis.henriques@...onical.com>
---
drivers/acpi/bus.c | 56 ++++++++++++++++++++++++++++++++++++++--------------
include/linux/acpi.h | 2 ++
init/main.c | 1 +
3 files changed, 44 insertions(+), 15 deletions(-)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c5bc8cfe09fa..60a38349f297 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -480,6 +480,16 @@ static int __init acpi_bus_init_irq(void)
u8 acpi_gbl_permanent_mmap;
+/**
+ * acpi_early_init - Initialize ACPICA and populate the ACPI namespace.
+ *
+ * The ACPI tables are accessible after this, but the handling of events has not
+ * been initialized and the global lock is not available yet, so AML should not
+ * be executed at this point.
+ *
+ * Doing this before switching the EFI runtime services to virtual mode allows
+ * the EfiBootServices memory to be freed slightly earlier on boot.
+ */
void __init acpi_early_init(void)
{
acpi_status status;
@@ -543,26 +553,42 @@ void __init acpi_early_init(void)
acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
}
#endif
+ return;
+
+ error0:
+ disable_acpi();
+}
+
+/**
+ * acpi_subsystem_init - Finalize the early initialization of ACPI.
+ *
+ * Switch over the platform to the ACPI mode (if possible), initialize the
+ * handling of ACPI events, install the interrupt and global lock handlers.
+ *
+ * Doing this too early is generally unsafe, but at the same time it needs to be
+ * done before all things that really depend on ACPI. The right spot appears to
+ * be before finalizing the EFI initialization.
+ */
+void __init acpi_subsystem_init(void)
+{
+ acpi_status status;
+
+ if (acpi_disabled)
+ return;
status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
- goto error0;
+ disable_acpi();
+ } else {
+ /*
+ * If the system is using ACPI then we can be reasonably
+ * confident that any regulators are managed by the firmware
+ * so tell the regulator core it has everything it needs to
+ * know.
+ */
+ regulator_has_full_constraints();
}
-
- /*
- * If the system is using ACPI then we can be reasonably
- * confident that any regulators are managed by the firmware
- * so tell the regulator core it has everything it needs to
- * know.
- */
- regulator_has_full_constraints();
-
- return;
-
- error0:
- disable_acpi();
- return;
}
static int __init acpi_bus_init(void)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index fa91beba3cd0..ef152461bd46 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -406,6 +406,7 @@ extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
#define ACPI_OST_SC_INSERT_NOT_SUPPORTED 0x82
extern void acpi_early_init(void);
+extern void acpi_subsystem_init(void);
extern int acpi_nvs_register(__u64 start, __u64 size);
@@ -440,6 +441,7 @@ static inline const char *acpi_dev_name(struct acpi_device *adev)
}
static inline void acpi_early_init(void) { }
+static inline void acpi_subsystem_init(void) { }
static inline int early_acpi_boot_init(void)
{
diff --git a/init/main.c b/init/main.c
index ed5f48edc7a8..44af5b583cf4 100644
--- a/init/main.c
+++ b/init/main.c
@@ -666,6 +666,7 @@ asmlinkage __visible void __init start_kernel(void)
check_bugs();
+ acpi_subsystem_init();
sfi_init_late();
if (efi_enabled(EFI_RUNTIME_SERVICES)) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists