[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <55A66073.5010800@ti.com>
Date: Wed, 15 Jul 2015 16:30:27 +0300
From: Roger Quadros <rogerq@...com>
To: Peter Chen <peter.chen@...escale.com>
CC: <stern@...land.harvard.edu>, <balbi@...com>,
<gregkh@...uxfoundation.org>, <dan.j.williams@...el.com>,
<jun.li@...escale.com>, <mathias.nyman@...ux.intel.com>,
<tony@...mide.com>, <Joao.Pinto@...opsys.com>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>
Subject: Re: [PATCH v3 04/11] otg-fsm: move usb_bus_start_enum into otg-fsm->ops
On 14/07/15 03:34, Peter Chen wrote:
> On Mon, Jul 13, 2015 at 01:13:54PM +0300, Roger Quadros wrote:
>> Peter,
>>
>> On 13/07/15 04:58, Peter Chen wrote:
>>> On Wed, Jul 08, 2015 at 01:19:30PM +0300, Roger Quadros wrote:
>>>> This is to prevent missing symbol build error if OTG is
>>>> enabled (built-in) and HCD core (CONFIG_USB) is module.
>>>>
>>>
>>> We may let the OTG-DRD/OTG-FSM depends on CONFIG_USB to fix it.
>>
>> CONFIG_OTG already depends on CONFIG_USB as it is a sub-option of
>> CONFIG_USB. It doesn't depend on CONFIG_USB_GADGET and that can
>> be fixed.
>>
>> But dependency is not the problem here. Symbols not available to
>> OTG driver when USB/GADGET is 'm' is the problem.
>>
>> e.g.
>> CONFIG_USB_OTG is always built-in.
>> we need to work if CONFIG_USB is 'm'/'y'
>> _and_ if CONFIG_USB_GADGET is 'm'/'y'
>>
>
> below should fix this issue, but we may need to make some
> changes for code which are defined by CONFIG_USB_OTG.
>
> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> index a99c89e..5e374ad 100644
> --- a/drivers/usb/core/Kconfig
> +++ b/drivers/usb/core/Kconfig
> @@ -42,8 +42,9 @@ config USB_DYNAMIC_MINORS
> If you are unsure about this, say N here.
>
> config USB_OTG
> - bool "OTG support"
> + tristate "OTG support"
> depends on PM
> + depends on USB && USB_GADGET
> default n
> help
> The most notable feature of
> USB OTG is support for a
With this USB_OTG will become 'm' when either USB or USB_GADGET is m
and will break if either USB or USB_GADGET is made y as all OTG core
API symbols won't be available. :)
cheers,
-roger
>>
>>>
>>> Peter
>>>
>>>> Signed-off-by: Roger Quadros <rogerq@...com>
>>>> ---
>>>> drivers/usb/common/usb-otg-fsm.c | 6 ++++--
>>>> drivers/usb/phy/phy-fsl-usb.c | 2 ++
>>>> include/linux/usb/otg-fsm.h | 1 +
>>>> 3 files changed, 7 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
>>>> index 1873eb3..156fd25 100644
>>>> --- a/drivers/usb/common/usb-otg-fsm.c
>>>> +++ b/drivers/usb/common/usb-otg-fsm.c
>>>> @@ -166,8 +166,10 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
>>>> otg_loc_conn(fsm, 0);
>>>> otg_loc_sof(fsm, 1);
>>>> otg_set_protocol(fsm, PROTO_HOST);
>>>> - usb_bus_start_enum(fsm->otg->host,
>>>> - fsm->otg->host->otg_port);
>>>> + if (fsm->ops->start_enum) {
>>>> + fsm->ops->start_enum(fsm->otg->host,
>>>> + fsm->otg->host->otg_port);
>>>> + }
>>>> break;
>>>> case OTG_STATE_A_IDLE:
>>>> otg_drv_vbus(fsm, 0);
>>>> diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
>>>> index ee3f2c2..19541ed 100644
>>>> --- a/drivers/usb/phy/phy-fsl-usb.c
>>>> +++ b/drivers/usb/phy/phy-fsl-usb.c
>>>> @@ -783,6 +783,8 @@ static struct otg_fsm_ops fsl_otg_ops = {
>>>>
>>>> .start_host = fsl_otg_start_host,
>>>> .start_gadget = fsl_otg_start_gadget,
>>>> +
>>>> + .start_enum = usb_bus_start_enum,
>>>> };
>>>>
>>>> /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
>>>> diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
>>>> index c631dde..22d8baa 100644
>>>> --- a/include/linux/usb/otg-fsm.h
>>>> +++ b/include/linux/usb/otg-fsm.h
>>>> @@ -198,6 +198,7 @@ struct otg_fsm_ops {
>>>> void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
>>>> int (*start_host)(struct otg_fsm *fsm, int on);
>>>> int (*start_gadget)(struct otg_fsm *fsm, int on);
>>>> + int (*start_enum)(struct usb_bus *bus, unsigned port_num);
>>>> };
>>>>
>>>>
>>>> --
>>>> 2.1.4
>>>>
>>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists